When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $56.99
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Fitment:
Make Model Year Engine Note Porsche 914 1970-1973 H41.7L Manualtrans. Porsche 914 1974-1975 H41.8L Volkswagen Beetle 1967 H41.5L Standardfinish Volkswagen Beetle 1968-1969 H41.5L Manualtrans. Volkswagen Beetle 1970-1979 H41.6L Manualtrans. Volkswagen Combi 1982-1988 H41.6L Volkswagen Combi 1989 l41.8L Volkswagen Combi 1993-2000 l41.8L Volkswagen Fastback 1967-1973 H41.6L Manualtrans. Volkswagen KarmannGhia 1967 H41.5L Volkswagen KarmannGhia 1968-1969 H41.5L ManualTrans. Volkswagen KarmannGhia 1970-1974 H41.6L ManualTrans. Volkswagen Panel 1995-1998 l41.8L Volkswagen Squareback 1967-1973 H41.6L ManualTrans. Volkswagen SuperBeetle 1972-1980 H41.6L Volkswagen Transporter 1963-1967 H41.5L MiniPassengerVan Volkswagen Transporter 1968-1974 H41.6L MiniPassengerVan Volkswagen Transporter 1972-1973 H41.7L Manualtrans. Volkswagen Transporter 1974-1975 H41.8L Manualtrans. 1.1kW,12Volt,CCW,9TeethPart Number:
16450N, 16450R, 16450, 16446, 19006, 110363, 6004AA0021, 6004AA0022, 111911023, 111911023A
111911023BT, 111911023C, 311911023B, 311911023C, 0001211014, 0001211992, 0001211993
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one.Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
PayPal only!
1.We only accept Paypal.
2.We send all the items are based on your paypal address.
3.Please make sure your PayPal and eBay address is correct. If not, please correct it before payment.
We only ship this item to United States !
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
2. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible.
If you send us an e-mail, it will be answered within 48 hours during our working hours.
Please feel free to contact us if you have any questions:
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
✅Dear customer, when you want to return or exchange goods
(Please contact us first, instead of directly initiating a dispute)
1: Contact the seller first
2: Send pictures: outer packaging&scanned labels&item itself&with complete accessories, etc
necessary condition
Rule A: The original packaging of the item is in an unused state.
Rule B: The outer packaging must not have any damage.
3: Obtain return label
4: Delivered Projects - Payment Repayment✅A 15% restocking and shelving fee will be charged for returns or exchanges that are not caused by the seller and are in good condition.
Exchange will not charge restocking fees or shipping fees due to transportation errors✅Priority
In case of the following reasons, the freight will be borne by the buyer
1: Unexpected order
2: Find a better price
3: Change your mind
4: Buy more items/make mistakes/misread model information✅Please note
Missing accessories/quality issues/transportation damage, etc
Please contact us first to obtain a good solution, rather than directly opening a return dispute.
Thank you very much for your understanding. I hope we have a pleasant cooperation!
Contact us if you have any question, Give us a chance to serve you, negative
feedback could not solve anything, communication Please!
❎(NO) Three stars is LOW star, NO 1,2,3 stars PLEASE!
✅(YES) Please give us Five-star!
Have Question or Problem??
Step 1: Contact seller
Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message. NO others please!
Step 3: Describe your question clearly; we will give you the best solution
Please leave five stars positive feedback positive comment and Five-Stars.
* We maintain a high standard of excellence (5 star rating) and strive for 100% customer satisfaction!
* Feedback is very important to us.
* We would like you to contact us immediately before giving us neutral or negative feedback so that we can address your concerns to our satisfaction.
* If we don't understand these problems, we won't be able to solve them!
* After understanding the problem, we will be able to give you a satisfactory answer!
It's highly appreciated you leave us positive feedback and 5 star rating comments if you are satisfied with our service!
Your comment is very important in our business success.
Important Points
➡️ before Placing an Order, Be Sure to Check the Compatibility and Confirm That This Part Is Suitable for Your Vehicle.
➡️ to Confirm, Please Select a Vehicle from the "My Garage" List or Enter Your Vehicle Details Above to Ensure That Your Model Is Included in the Compatibility Table.
➡️ if You Encounter the Problem That You Can't Confirm Whether the Model Is Suitable, Please Contact Me. I Can Quickly Answer the Adaptability Problem for You. Thank You for Your Cooperation and Support!
✅ Ebay Compatible List Can Not Show up All Car Model, and Sometimes It May Have Mistake, and May Not 100% Accurate or out of Date.
✅ Please Check the Manul of Your Vechicle and Choose the Correct Good.
✅ If You Are Not Sure the Which Socket Your Vehicle Need.
✅ Please Send Us Your Car Make, Model, Year and Other Information,We Will Help to Check Which You Need.
✅ If You Have Any Questions, Please Do Contact Us.thank You!