When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $113.89
- Description -
The snorkel system can reposition the engine air intake from a relatively low and fragile position under the hood to a higher, safer position, where it can provide constant cool, clean, dry air. Breathing tube is made of high-quality polyethylene material, with strong elasticity and ultraviolet stability. Install one before you travel to help the long-running engine breathe, while the engine is also protected by a snorkel.
- Feature -
100% brand new and good quality.
Easy installation, long service life.
Mounting brackets and necessary hardwares are included.
Made from UV resistant linear low density polyethylene (LLDPE).
Designed to Withstand Impact & UV Resistance.
Corrosion resistance and weather resistance.
Protects your engine from additional filtering.
- Specifications -
Color:Black
Material: LLDPE
Fits for:Landcruiser 70 71 73 75 78 Series 1985 - 2007, Narrow Front only
Petrol 3F 4.0Litre-I6
Petrol 1FHZ-FE 4.5Litre-I6
Diesel 3B 3.Litre-I4
Diesel 2H-4.0Litre-I6
Diesel 1HZ 4.2Litre-I6
Petrol 3F 4.0Litre-I6
Petrol 1FHZ-FE 4.5Litre-I6
Diesel 3B 3.Litre-I4
Diesel 2H-4.0Litre-I6
Diesel 1HZ 4.2Litre-I6
Installation Position: Right
Gross Weight: 4.9kg
Package Dimensions (L x W x H): 139x 47x 30cm
-Package Content-
Ram
LLDPE snorkels
Bag of bolts, nuts, hose and brackets
-Installtion Of A Snorkel Kit-
1.Out of the box - Check you have all the parts required.
2.Remove the air filter to reveal the inner guard port.
3.Tape the template to the outer guard aligning the straight edges with the back and top lines of the side panel. Do not use any other cut outs to align the template. If your template has a hole marked for the indicator do not use this to align the indicator. This is the new indicator position.
4.Mark, hole punch and drill pilot holes.
5.Using hole saw, drill port for air pipe as per the stencil.With the step drill step out the mounting holes. Drill these holes out as required but do not exceed 16mm. REMEMBER to prime these holes with Rust Guard.
7.Partially remove the wheel inner lining to access between the inner and outer guard.
8.Fit the interconnecting pipe, hose and clamps while re-fitting the air box. Remember to seal any pipe connections with sealant.
9.Bolt up the snorkel so the upper mount can be located. Mark the holes, drill and pop rivot the upper mounting guard to the A pillar.
10.Finish securing all bolts, fit the top snorkel air ram and reinstall the inner wheel arch lining. Enjoy your new snorkel!
- Note -
Professional installation is highly recommended!
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Item SpecificsBrand Vap-autopartsManufacturer Part Number VA177157P01Manufacturer Warranty 1 YearPlacement on Vehicle RightType Snorkel KitFitment Type Performance/CustomColor Textured BlackModified Item NoCustom Bundle NoPart Type Cold Air Intake SnorkelMaterial LLDPE PlasticMounting Hardware Included YesWeight(KG) 4.9Interchange Part Number Landcruiser 70 71 73 75 78 Series 1985 - 2007, Narrow Front onlyFeature ESCP
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- Ordersprocessedwithin24-48hoursofpaymentverification.
- WeonlyshiptoconfirmedPAYPALaddresses.YourPAYPALaddressmustmatchyourShippingaddress.
- Theimagesshownarenottheactualitemandareforyourreferenceonly.
- Servicetransittimeisprovidedbythecarrierandexcludesweekendsandholidays.Transittimesmayvary,particularlyduringtheholidayseason.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
- Description -
The snorkel system can reposition the engine air intake from a relatively low and fragile position under the hood to a higher, safer position, where it can provide constant cool, clean, dry air. Breathing tube is made of high-quality polyethylene material, with strong elasticity and ultraviolet stability. Install one before you travel to help the long-running engine breathe, while the engine is also protected by a snorkel.
- Feature -
100% brand new and good quality.
Easy installation, long service life.
Mounting brackets and necessary hardwares are included.
Made from UV resistant linear low density polyethylene (LLDPE).
Designed to Withstand Impact & UV Resistance.
Corrosion resistance and weather resistance.
Protects your engine from additional filtering.
- Specifications -
Color:Black
Material: LLDPE
Fits for:Landcruiser 70 71 73 75 78 Series 1985 - 2007, Narrow Front only
Petrol 3F 4.0Litre-I6
Petrol 1FHZ-FE 4.5Litre-I6
Diesel 3B 3.Litre-I4
Diesel 2H-4.0Litre-I6
Diesel 1HZ 4.2Litre-I6
Petrol 3F 4.0Litre-I6
Petrol 1FHZ-FE 4.5Litre-I6
Diesel 3B 3.Litre-I4
Diesel 2H-4.0Litre-I6
Diesel 1HZ 4.2Litre-I6
Installation Position: Right
Gross Weight: 4.9kg
Package Dimensions (L x W x H): 139x 47x 30cm
-Package Content-
Ram
LLDPE snorkels
Bag of bolts, nuts, hose and brackets
-Installtion Of A Snorkel Kit-
1.Out of the box - Check you have all the parts required.
2.Remove the air filter to reveal the inner guard port.
3.Tape the template to the outer guard aligning the straight edges with the back and top lines of the side panel. Do not use any other cut outs to align the template. If your template has a hole marked for the indicator do not use this to align the indicator. This is the new indicator position.
4.Mark, hole punch and drill pilot holes.
5.Using hole saw, drill port for air pipe as per the stencil.With the step drill step out the mounting holes. Drill these holes out as required but do not exceed 16mm. REMEMBER to prime these holes with Rust Guard.
7.Partially remove the wheel inner lining to access between the inner and outer guard.
8.Fit the interconnecting pipe, hose and clamps while re-fitting the air box. Remember to seal any pipe connections with sealant.
9.Bolt up the snorkel so the upper mount can be located. Mark the holes, drill and pop rivot the upper mounting guard to the A pillar.
10.Finish securing all bolts, fit the top snorkel air ram and reinstall the inner wheel arch lining. Enjoy your new snorkel!
- Note -
Professional installation is highly recommended!
Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- Ordersprocessedwithin24-48hoursofpaymentverification.
- WeonlyshiptoconfirmedPAYPALaddresses.YourPAYPALaddressmustmatchyourShippingaddress.
- Theimagesshownarenottheactualitemandareforyourreferenceonly.
- Servicetransittimeisprovidedbythecarrierandexcludesweekendsandholidays.Transittimesmayvary,particularlyduringtheholidayseason.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Copyright ofignition-coil. All rights reserved.