When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $78.49
Product Specifications:
(Please make sure you take the proper measurements before purchasing)
Quantity: 4pcs
Thickness: 2 inch (50mm) per spacer
Hub Bore Size: 57.1mm
Vehicle Bolt Pattern: 4x100mm
Wheel Bolt Pattern: 4x100mm
Thread Pitch: M12x1.5
Compatibility Information:
(Please check the compatibility chart carefully before purchasing)
Chevrolet
Chevrolet Chevette 1976-1987
Chevrolet Cobalt 2005-2010 (4 Lugs Application Only)
Chrysler
Chrysler Laser 1984-1986
Chrysler LeBaron 1981-1985
Chrysler New Yorker 1982-1985
Dodge
Dodge Aries 1981-1986
Dodge Charger 1983-1986
Dodge Colt 1993-1994
Dodge Daytona 1984
Dodge Neon 1995-2005 (4 Lugs Application Only)
Geo
Geo Prizm 1990-1997
Geo Storm 1990-1993
Plymouth
Plymouth Horizon 1979-1990
Plymouth Reliant 1981-1985
Plymouth Voyager 1984-1985
Pontiac
Pontiac G5 2007-2010
Saturn
Saturn Ion 2003-2007
Saturn SC 1991-1992
Saturn SC1 1993-2002
Saturn SC2 1993-2002
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
Item SpecificsBrand Ignition coilManufacturer Part Number IG82616001ilType Wheel SpacersQuantity 4pcsThickness 2 inch / 50mmVehicle Bolt Pattern 4x100mmWheel Bolt Pattern 4x100mmHub Bore Size 57.1mmHubcentric YesThread Pitch M12x1.5 / 12mmX1.5 / 12x1.5Stud Grade 10.9Color SilverLug Patterns 4 LugsMaterial High Quality T6-6061 Billet AluminumSurface Finish CNC Machined Polished Aluminum FinishPlacement on Vehicle LeftFitment for Chevrolet Chevette Chrysler LeBaron Dodge Charger Saturn IonInterchange Part Number fits 2005-2010 Chevy Cobalt 2007-2010 Pontiac G5Other Part Number for chevy cobalt wheel spacersSuperseded Part Number 4x100 wheel spacersWarranty 1 YearReturn Free 30 day returnsDelivery Area The USAPlace of Delivery Ontario,California
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- Ordersprocessedwithin24-48hoursofpaymentverification.
- WeonlyshiptoconfirmedPAYPALaddresses.YourPAYPALaddressmustmatchyourShippingaddress.
- Theimagesshownarenottheactualitemandareforyourreferenceonly.
- Servicetransittimeisprovidedbythecarrierandexcludesweekendsandholidays.Transittimesmayvary,particularlyduringtheholidayseason.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Product Specifications:
(Please make sure you take the proper measurements before purchasing)
Quantity: 4pcs
Thickness: 2 inch (50mm) per spacer
Hub Bore Size: 57.1mm
Vehicle Bolt Pattern: 4x100mm
Wheel Bolt Pattern: 4x100mm
Thread Pitch: M12x1.5
Compatibility Information:
(Please check the compatibility chart carefully before purchasing)
Chevrolet
Chevrolet Chevette 1976-1987
Chevrolet Cobalt 2005-2010 (4 Lugs Application Only)
Chrysler
Chrysler Laser 1984-1986
Chrysler LeBaron 1981-1985
Chrysler New Yorker 1982-1985
Dodge
Dodge Aries 1981-1986
Dodge Charger 1983-1986
Dodge Colt 1993-1994
Dodge Daytona 1984
Dodge Neon 1995-2005 (4 Lugs Application Only)
Geo
Geo Prizm 1990-1997
Geo Storm 1990-1993
Plymouth
Plymouth Horizon 1979-1990
Plymouth Reliant 1981-1985
Plymouth Voyager 1984-1985
Pontiac
Pontiac G5 2007-2010
Saturn
Saturn Ion 2003-2007
Saturn SC 1991-1992
Saturn SC1 1993-2002
Saturn SC2 1993-2002
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- Ordersprocessedwithin24-48hoursofpaymentverification.
- WeonlyshiptoconfirmedPAYPALaddresses.YourPAYPALaddressmustmatchyourShippingaddress.
- Theimagesshownarenottheactualitemandareforyourreferenceonly.
- Servicetransittimeisprovidedbythecarrierandexcludesweekendsandholidays.Transittimesmayvary,particularlyduringtheholidayseason.
- We accept payment via PAYPAL only.
- Payment must be made within 4 days of auction closing.
- S&H will be determined based upon the SHIP TO address.PLEASE NOTE: S&H dons not include duties,local taxes
You have 7 days to contact us and 10 days to return it from the date it was received. If this item is inyour possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!
- 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
- Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible).
- You agree to all of the above-listed policies upon bidding on and winning this auction!
- We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
- It is impossible to address issues if we do not know about them!
Copyright ofignition-coil. All rights reserved.