2PC 3\" 8x6.5 Wheel Spacers 14x1.5 Fits Ram 2500 3500 Chevrolet Silverado 2500 HD for Sale

2PC 3\
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $74.99

Product Description

Wheel Spacer Specifications

  • Quantity: Two (2)
  • Thickness: 3\" (76.2mm)
  • Bolt Pattern: 8x6.5mm
  • Center Bore: 126.15mm
  • Stud/Nut Thread Pitch: M14x1.5

Compatible with:

  • 1988-2000 C2500 K2500 K3500(8 Lug),
  • 1988-2004 C3500,
  • 2003-2023 Express 2500(only fit 8 lug),
  • 1996-2023 Express 3500,
  • 2001-2006 Silverado 1500 HD,
  • 1999-2010 Silverado 2500,
  • 2001-2010 Silverado 2500 HD, 2001-2010 Silverado 3500(NOT Fit DRW),
  • 2007-2010 Silverado 3500 HD(NOT Fit DRW), 2000-2013 Suburban 2500,
  • 2002-2006 Avalanche 2500, 1996-2023 Savana 2500 3500 (only fit 8lug),
  • 1999-2010 Sierra 2500HD, 1999-2010 Sierra 3500HD, 2000-2013 Yukon XL 2500

  • 2000-2013 Yukon XL 2500
  • 2013-2023 Ram 2500
  • 2012-2018 Ram 3500(NOT fit DRW)
TECHNOLOGY:

  • High Tensile Strength Forged 6061-T6 Aluminum
  • Precision CNC Machined ensure high accuracy and safety
  • Hard Anodized for durablity
  • High quality pre-installed heat treated 12.9 grade studs

1

2

3

4

Installation Procedure

Step 1:

  • Following your vehicle owner\'s manual, proper raise the vehicle and support it using adequately load-rated jackstands.
  • Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don\'t continue with this installation.
  • Remove any wheel visible rust from the mating flange on the vehicle\'s rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.

Step 2:

  • If proper seating can be achieved, apply provided thread locker to vehicle\'s studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • DO NOT USE AN IMPACT WRENCH.

Step 3:

  • Check that wheel and tire clearance allow for full steering(lock-to-lock).
  • If there is no interference, vehicle may be lowered.
  • Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.


Parts Search:

Follow