HOT ROD VEGA MANUAL CROSS STEERING BOX W/ ZINC PITMAN ARM & 1935-41 FORD BRACKET for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $159.88

HOT ROD VEGA MANUAL CROSS STEERING BOX W/ FLAT PITMAN ARM & 1935-41 FORD BRACKET

This is a brand new Street Rod,1935-41Fords Vega Steering Box, Weld-On Mounting Bracket, Pitman Arm

This vega box kit is designed specifically for your 1935-1940 Ford Car and 1935-1941 Ford Truck.

This Brand New high quality Vega Street Rod Steering Box is ideal for Street Rod applications and is smoother and stronger than OEM boxes.

Steering Shaft Spline: 5/8"-36

Ratio: 20 : 1

5 1/2" Turns (Lock-to-Lock)

Mounting pattern is 2 3/4" and 4 3/8" center-to-center of the three mounting holes

This is the stock configuration, meaning when you turn the input shaft clockwise, the output shaft also turns clockwise

Recommended for vehicles weighing 2800 lbs or less

Comes complete with the chrome dress cap.

This Vega Box comes complete with the pitman arm, mounting bracket,

BRACKET

This bracket is designed to fit the tapered frames of the 1935-1941 Fords
It measures 3.155" between the tabs at the front and 3.380" between the tabs at the rear
PITMAN ARM

The pitman arm is ZINC and non-offset design.Double-tapered "Ford" tie rod end hole allows you to attach the drag link on the top or on the bottom.

Tapered tie rod hole measures 0.625" on both sides and tapers down to 0.585" in the center of the hole.

Measure:

-Spline Count: 36

-Hole Diameter .625

-Overall Length 7.87

-Center to Center 6.375


Parts Search:


Follow