(4) 5x4.5 20mm Wheel Spacers 12x1.25 Hubcentirc For Infiniti Q60 For Nissan 350Z for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $59.02

  • --If you dont't know the specific of your vehicle, pls confrim by following the below steps:
  • 1) Check Vehicle Bolt Pattern/ PCD
  • For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
  • 5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
  • Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
  • 2) Check Vehicle Hub Bore Size
  • (4) 5x4.5 20mm Wheel Spacers 12x1.25 Hubcentirc For Infiniti Q60 For Nissan 350Z

    --If you dont't know the specific of your vehicle, pls confrim by following the below steps:

    1) Check Vehicle Bolt Pattern/ PCD

    For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.

    5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.

    Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.

    2) Check Vehicle Hub Bore Size

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

    3) Check Vehicle Thread Pitch

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

    --Measure the fender gap to choose suitable thickness.

    Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.

    Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)

    --Step for Installation Wheel Spacers

    Compatible Vehicles:

    • For Infiniti EX35 2008-2012
    • For Infiniti EX37 2013
    • For Infiniti FX35 2003-2012
    • For Infiniti FX37 2013
    • For Infiniti FX45 2003-2008
    • For Infiniti FX50 2009-2013
    • For Infiniti G25 2011-2012
    • For Infiniti G35 2003-2008
    • For Infiniti G37 2008-2013
    • For Infiniti I30 1996-2001
    • For Infiniti I35 2002-2004
    • For Infiniti J30 1993-1997
    • For Infiniti JX35 2013
    • For Infiniti M35 2006-2010
    • For Infiniti M37 2011-2013
    • For Infiniti M45 2003-2004&2006-2010
    • For Infiniti M56 2011-2013
    • For Infiniti Q40 2015
    • For Infiniti Q45 1992-2006
    • For Infiniti Q50 2014-2022
    • For Infiniti Q60 2014-2022
    • For Infiniti Q70 2014-2019
    • For Infiniti Q70L 2015-2019
    • For Infiniti QX50 2014-2017&2019-2022
    • For Infiniti QX55 2022
    • For Infiniti QX60 2014-2020
    • For Infiniti QX70 2015-2020
    • For Nissan 240SX 1995-1998
    • For Nissan 300ZX 1984-1996
    • For Nissan 350Z 2003-2009
    • For Nissan 370Z 2009-2021
    • For Nissan Altima 2002-2022
    • For Nissan Juke 2012-2017
    • For Nissan LEAF ELECTRIC 2011-2022
    • For Nissan Maxima 1989-2012&2016-2022
    • For Nissan Murano 2014-2021
    • For Nissan NV200 2013-2020
    • For Nissan Pathfinder 2013-2020
    • For Nissan Quest 1993-2002&2004-2009&2011-2017
    • For Nissan Rogue 2016-2022
    • For Nissan Rogue Sport 2021
    • For Nissan Sentra 2007-2022

    ?


    Item SpecificsManufacturer Part Number E819588WAYBrand EWAY-motorWheel bolt pattern 5x4.5Vehicle bolt pattern 5x4.5Lug Patterns 5LugsPackage Included 4pcsColor BlackStuds 12x1.25Thickness 20mmWarranty 1 YearStud Grade 10.9Inner Diameter 66.1mmMaterial High Quality t6 6061 Billet AluminumSurface Finish CNC Machined Polished Aluminum FinishShip from Ontario,CaliforniaCompatibility Fits Infiniti G37 For Nissan 370Z 350Z AltimaHubcentirc YesPackage Weight 8.82lbOther Part Number 5 Lug-5x4.5-5x114.3-20mm-CB 66.1mm-M12x1.25Interchange Part Number For Nissan Altima Sentra Maxima Juke 350Z 370Z 300ZXSuperseded Part Number For Infiniti G37 G35 Q50 Q70 FX35Torqued Down By Hand At 70-80 FT/LB
    Payment 1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.3.Local pick up is not available.4.Orders Will be shipped out from our warehouse in US.5.International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.Warranty 1,We stand behind every product we sell.2,All of our brand new items come with a 60-Days money-back guarantee.3,We define the item as defective only if it doesn't function as described.4,It is the buyer's responsibility to understand the item description before bidding.5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.7,Shipping & handling cost are not refundable.8,Man-made damage by abuse or wrong operation is not covered by this warranty.9,No product liability insurance is assumed.Returns 1.All of our brand new items come with a 60-Days money-back guarantee.2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.5.Shipping& handling cost are not refundable.6.Man-made damage by abuse or wrong operation is not covered by this warranty.7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.Payments

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    Feedback 1. We will leave positive feedback once we get your payment.2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home wheel lug nut Leveling lift kit wheel hub bearing wheel spacers suspension kit brake pads Brake Rotor and Pads steering knuckle-7 Jake Stand Bed Step cargo cover ABS Wheel Sensor Steering Shaft hub caps OtherHot Item 4X 1.5\'\' 6x5.5 Wheel Spacer 12x1.5 Hubcentric For Toyota Tacoma 4Runner FJ Lexus USD 91.12 4x 2\" 8x170 Wheel Spacers 14x2 Studs Fits Ford F-250 F-350 Super Duty Excursion USD 116.71 32X 14x1.5 Chrome 7 Spline Lug Nut + 2 Key For Ford F-250 Super Duty Ram 1500 USD 31.82 (4) 4x156 2\" ATV Wheel Spacers 12x1.5 Fits Polaris RZR XP 1000 900 Trail Turbo USD 94.88 4Pcs 6x5.5 Wheel Spacers 3\" For GMC Sierra 1500 Chevrolet Silverado 1500 Tahoe USD 131.29 Delivery

    New List Item For Ford Flex Taurus Lincoln MKS MKT 3.7L Front Ceramic Brake Rotors And Pads USD 138.82 2x Front Left Or Right Wheel Bearings Hub Assembly For Chevy Camaro 1993-2002 USD 82.58 2 Rear Wheel Hub Bearing Assembly For Kia Soul 2014-2019 EV 2015 2016 2017-2019 USD 83.85 Rear Wheel Hub Bearing Assembly For Kia Soul 2014-2019 EV 2015 2016 2017-2019 USD 53.88 Front Wheel Hub And Bearing Assembly 513316 Fits Buick Verano Cadillac Ats Elr USD 48.72 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us (4) 5x4.5 20mm Wheel Spacers 12x1.25 Hubcentirc For Infiniti Q60 For Nissan 350Z

    --If you dont't know the specific of your vehicle, pls confrim by following the below steps:

    1) Check Vehicle Bolt Pattern/ PCD

    For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.

    5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.

    Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.

    2) Check Vehicle Hub Bore Size

    Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.

    3) Check Vehicle Thread Pitch

    There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

    --Measure the fender gap to choose suitable thickness.

    Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.

    Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)

    --Step for Installation Wheel Spacers

    Compatible Vehicles:

    • For Infiniti EX35 2008-2012
    • For Infiniti EX37 2013
    • For Infiniti FX35 2003-2012
    • For Infiniti FX37 2013
    • For Infiniti FX45 2003-2008
    • For Infiniti FX50 2009-2013
    • For Infiniti G25 2011-2012
    • For Infiniti G35 2003-2008
    • For Infiniti G37 2008-2013
    • For Infiniti I30 1996-2001
    • For Infiniti I35 2002-2004
    • For Infiniti J30 1993-1997
    • For Infiniti JX35 2013
    • For Infiniti M35 2006-2010
    • For Infiniti M37 2011-2013
    • For Infiniti M45 2003-2004&2006-2010
    • For Infiniti M56 2011-2013
    • For Infiniti Q40 2015
    • For Infiniti Q45 1992-2006
    • For Infiniti Q50 2014-2022
    • For Infiniti Q60 2014-2022
    • For Infiniti Q70 2014-2019
    • For Infiniti Q70L 2015-2019
    • For Infiniti QX50 2014-2017&2019-2022
    • For Infiniti QX55 2022
    • For Infiniti QX60 2014-2020
    • For Infiniti QX70 2015-2020
    • For Nissan 240SX 1995-1998
    • For Nissan 300ZX 1984-1996
    • For Nissan 350Z 2003-2009
    • For Nissan 370Z 2009-2021
    • For Nissan Altima 2002-2022
    • For Nissan Juke 2012-2017
    • For Nissan LEAF ELECTRIC 2011-2022
    • For Nissan Maxima 1989-2012&2016-2022
    • For Nissan Murano 2014-2021
    • For Nissan NV200 2013-2020
    • For Nissan Pathfinder 2013-2020
    • For Nissan Quest 1993-2002&2004-2009&2011-2017
    • For Nissan Rogue 2016-2022
    • For Nissan Rogue Sport 2021
    • For Nissan Sentra 2007-2022

    ?

    Item SpecificsManufacturer Part Number :E819588WAYBrand :EWAY-motorWheel bolt pattern :5x4.5Vehicle bolt pattern :5x4.5Lug Patterns :5LugsPackage Included :4pcsColor :BlackStuds :12x1.25Thickness :20mmWarranty :1 YearStud Grade :10.9Inner Diameter :66.1mmMaterial :High Quality t6 6061 Billet AluminumSurface Finish :CNC Machined Polished Aluminum FinishShip from :Ontario,CaliforniaCompatibility :Fits Infiniti G37 For Nissan 370Z 350Z AltimaHubcentirc :YesPackage Weight :8.82lbOther Part Number :5 Lug-5x4.5-5x114.3-20mm-CB 66.1mm-M12x1.25Interchange Part Number :For Nissan Altima Sentra Maxima Juke 350Z 370Z 300ZXSuperseded Part Number :For Infiniti G37 G35 Q50 Q70 FX35Torqued Down By Hand At :70-80 FT/LB

    PaymentWarrantyReturnsPaymentsFeedback 1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.3.Local pick up is not available.4.Orders Will be shipped out from our warehouse in US.5.International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 1,We stand behind every product we sell.2,All of our brand new items come with a 60-Days money-back guarantee.3,We define the item as defective only if it doesn't function as described.4,It is the buyer's responsibility to understand the item description before bidding.5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.7,Shipping & handling cost are not refundable.8,Man-made damage by abuse or wrong operation is not covered by this warranty.9,No product liability insurance is assumed. 1.All of our brand new items come with a 60-Days money-back guarantee.2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.5.Shipping& handling cost are not refundable.6.Man-made damage by abuse or wrong operation is not covered by this warranty.7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.

    We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.

    1. We will leave positive feedback once we get your payment.2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.

    All rights reserved.




    Parts Search:


    Follow