4pc 1" Hubcentric Wheel Spacers 5x120 For 2010-On Camaro Corvette C8 CTS ATS G8 for Sale

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $64.99

  • Quantity: Four (4)
  • Thickness: 1" (25.4mm)
  • Vehicle Bolt Pattern: 5x120mm
  • Wheel Bolt Pattern: 5x120mm
  • Center Bore: 66.9mm
  • Stud/Nut Thread Pitch: M14x1.5

Compatible with:

  • 2008-2019 CTS
  • 2013-2019 XTS
  • 2010-2022 Camaro
  • 2010-2017 Equinox


  • Positions your wheels 1 inch outward
  • Allows installation of wider wheels & tires
  • Increases your vehicle's track-width
  • Hydraulic Pre-Pressed Studs eliminate the risk of vibrations
  • Improves the look of your vehicle





Installation Procedure

Step 1:

  • Following your vehicle owner's manual, proper raise the vehicle and support it using adequately load-rated jackstands.
  • Remove wheels and inspect rotors for any damage or cracks. If any damage is identified, don't continue with this installation.
  • Remove any wheel visible rust from the mating flange on the vehicle's rotor. Check both the rotor and wheel mounting flanges for burns, rivet heads, or other obstruction which could prevent proper seating of the spacer/adapter.

Step 2:

  • If proper seating can be achieved, apply provided thread locker to vehicle's studs and mount the wheel spacers on to rotor by torquing provided wheel spacers/adapter lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.
  • Install wheel on to wheel spacer using existing lug nuts. Tighten all lug nuts to the appropriate torque specification using a torque wrench.

Step 3:

  • Check that wheel and tire clearance allow for full steering(lock-to-lock).
  • If there is no interference, vehicle may be lowered.
  • Re-check torque after traveling the first 50-100 miles, then again every 2000-3000 miles.

Parts Search: