When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $28.49

[Important Notes] 1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.2. Measure the fender gap and stock bolt length to choose suitable thickness.3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.4pcs Package include:4 Pcs Wheel Spacers 20 pcs bolts1 pair Gloves1 x Steel Wire Ball2pcs Package include:2 Pcs Wheel Spacers 10 pcs bolts1 pair Gloves1 x Steel Wire Ball
Specification
Wheel Bolt Pattern: 5x120mm
Vehicle Bolt Pattern: 5x120mm
Thickness: 15mm per spacer
Thread Pitch : M12*1.5
Quantity: 2pcs or 4pcs
Hub/Center Bore :72.56mm,Hubcentric
Studs:10.9 Grade
Feature:
- Reduce the weight with the bigger hole.
- Dismount more easily with the special notch holes.3. Bolts with CHAMFERING design
- CNC machined from 6061-T6 aircraft-grade aluminum billet, with heat-treated 10.9 grade wheel studs.
- The anodized surface provides additional resistance to corrosion. Extraordinarily strong and light compared to spacers made of steel.
4pcs Package include:
4 Pcs Wheel Spacers
20 pcs bolts
1 pair Gloves
1 x Steel Wire Ball
2pcs Package include:
2 Pcs Wheel Spacers
10 pcs bolts
1 pair Gloves
1 x Steel Wire Ball
Application :1 Series(E87) -2005-2011 1 Series M,120i,125i,128i,130i,135i3 Series(E36) -1991-1998 318i,318is,318ti,320i,323i,323is,325i,325iX,325is,325iX,
3 Series(E46) -1999-2006 318i,318is,318ti,320i,323Ci,323i,323is,323ti,325Ci,325i,
3 Series(E90) -2007-2011 335xi,335is,335i xDrive,335i,335d,330i,328xi,328i xDrive,
5 Series(E34) -1990-1995 525i,525iT,530i,535i,
5 Series(E60) -2004-2009 525i,525xi,528i,528i xDrive,528xi,530i,530xi,535i,535i xDrive,
6 Series(E63) -2004-2010 645Ci,650Ci,650Ci,650i,
7 Series(E32) -1990-1993 735i,735iL,740i,740iL,750iL
7 Series(E38) -1994-2000 740i,740iL,750iL
8 Series(E31) -1990-1999 840Ci,850Ci,850C Si,850i,
2002-20016 Z4 (E85, E89)
1992-2013 M3 (E36, E46,E90,E92,E93)
1990-1995 M5(E34)
2004-2010 M5(E60,E61)
2005-2010 M6(E63 E64)
2009-2015 X1(E84)
[Important Notes]
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. PLEASE CONFIRMwhat you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adaptersare used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
What should I pay attention to during installation?
1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel.
2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short.
3) DO NOT proceed if both of the wheel spacer do not fit.
4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers.
5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs).
6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident.
7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles.
8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring.
