More Videos...

How To Solve An Engine Overheat Condition - EricTheCarGuy
How To Solve An Engine Overheat Condition - EricTheCarGuy http://www.ericthecarguy.com/ I actually had fun putting this one together for you since the car I was working on didn't cooperate it made it so I could show you real world problems as they happened, very cool. I think this one is pretty self explanatory so I will save a long explanation. In case you missed the link to the "Bleeding a Cooling System" here is a link for you --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Recharge an AC System - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ Finding leaks video: http://www.youtube.com/watch?v=95RdGLFIbL8 Basics of AC: http://www.youtube.com/watch?v=w17DpGCcRj8 AC Performance Test: http://www.youtube.com/watch?v=XU_A4wNuHXI AC pressures: http://www.aircondition.com/tech/questions/82/ AC pressures 2: http://www.idqusa.com/faqs.php?faq=74&faq_id=74&category_id=18 As I said in the video you need to be responsible when dealing with refrigerant, also in some locations it's not legal for you to perform your own AC work so keep that in mind and observe your local laws. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Does Stop Leak Work? - EricTheCarGuy
Does Stop Leak Work? - EricTheCarGuy http://www.ericthecarguy.com/ As technicians we all have opinions based on our experiences and sometimes the experiences of others, stop leak seems to be one of those things. In my experience it really hasn't done much for me and I haven't seen it perform any miracles but that's not to say that it hasn't at one time or another. I welcome your responses on this topic and look forward to hearing your opinions just be nice. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG

How To Find A Vacuum Leak - EricTheCarGuy
How To Find A Vacuum Leak - EricTheCarGuy http://www.ericthecarguy.com/ I get questions about engine performance issues all the time and one of the things I tell people to check for is a vacuum leak. This video is pretty straight forward in it's approach to finding a vacuum leak. On thing I might mention is that not all vacuum leaks are at the engine, some HVAC systems run on vacuum and can cause a leak under the dash in some cases so don't forget to look there. I've even seen vacuum operated door locks, that would be fun to find. Just be sure to be careful spraying flammable stuff on a hot engine, you don't want to take one problem and make it a whole lot worse. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Solve Honda Idle Problems - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ Before posting questions about Honda idle problems please read this: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41476-solving-honda-idle-issues-hunting-idle The viewers have chosen and this weeks video will be about solving Honda idle problems. I'm really not surprised as I get a lot of questions and requests about this very subject. Here are the links I promised in the video that will help you address specific issues mentioned in the video. How To Bleed a Cooling System http://www.youtube.com/watch?v=zUpXgAJ1gjU How to Check for Vacuum Leaks http://www.youtube.com/watch?v=9CPqbaSgcok Reading Check Engine Light Codes http://www.youtube.com/watch?v=BD05sPclLyE Diagnosing an Overheat http://www.youtube.com/watch?v=hUzOTnsWImI Hopefully when your done checking all that stuff out you will have solved your Honda's idle problem, if not leave a comment or send me a message and I'll see what I can do just make sure you have tried all the stuff in the videos first as that saves me from typing so much. I also want to add my "Idle Speech" into the mix here: http://www.ericthecarguy.com/forum/8-Service-and-Repair-Questions-Answered-Here/41475-solving-honda-idle-issues-rough-idle   There are a lot of things that can contribute to an idle issue, in fact in the end it may still be there to some degree because of the nature of that engine however here are some things to start with. First start with a good tune up, use NGK or Nippon Denso plugs, don't change the wires if they are OE, if they aren't OE you might consider NGK wires as they are very good and less expensive then OE.  A quality cap and rotor should be good.  A new air filter also helps. Don't change the PCV valve, if you see an aftermarket PCV valve in there put a Honda in, believe it or not I've seen idle issues caused by aftermarket PCV valves, the OE's last just about forever so you can easily justify the expense. Next a good valve adjustment, this goes a long way to smooth out the idle if done correctly, mess it up and things can get a lot worse though. While you have the valve cover off check the timing belt tension, if you feel a lot of slack this can cause the cam to 'chunk' as it spins causing a rough idle.  If you think the belt has been on there for some time then you might consider changing it and resetting the tension properly, if it's not ready for replacement you can reset the tension to take up the slack. DO NOT adjust the idle screw under any circumstances, it is set at the factory and that is the reason it was sealed in the first place. If you find that the seal has been broken and you have a low idle and you have done all of the above then you might turn the screw out a little to see if that helps the idle but only enough to try and bring it back to where it was before it was adjusted in the first place. Last clean the screen in the Idle Air Control valve, this can get clogged up with carbon over time and cause the flow through it to be restricted which can cause idle issues. If you still have a 'rough' idle after all of this THEN look to the engine mounts as you want to be sure the engine is running correctly before you go for those as the one in the back is a real pain to replace. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Diagnose A Fuel Pump Failure - EricTheCarGuy
How To Diagnose A Fuel Pump Failure - EricTheCarGuy http://www.ericthecarguy.com/ Airtex diagnosis webpage http://www.airtexproducts.com/techresources1.html I had the privilege of visiting Airtex and while I was there I spoke with Shane Neuman about diagnosing a faulty fuel pump, here is the result, Hope the information is helpful. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How to Find a Bad Wheel Bearing - EricTheCarGuy
How to Find a Bad Wheel Bearing - EricTheCarGuy Well as I said in the video I shot this some time ago but never posted it. I've been snowed in for a couple of days so I haven't been to the shop to make some new video so I decided to bring this one up from the vault. The idea is to give you some basic information on how to find a bad wheel bearing, replacing it once you find it is another story but diagnosing is the first step. Now, another way to find out if you have a limited slip is to jack up both sides of the car and rotate one of the drive wheels. If the wheel on the opposite side moves in the same direction you probably have a limited slip differential. If the wheel spins in the opposite direction you probably have a regular differential that is not limited slip. As I said in the video a bunch of times be careful doing this, use the parking brake and brace the rear wheels with something. I know you'll do the right thing. Now on to the recommended channels http://www.youtube.com/user/realfixesrealfast http://www.youtube.com/user/roadragecustoms --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- As always stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Unclogging A Heater Core - EricTheCarGuy
Unclogging A Heater Core - EricTheCarGuy There is a lot more here than meets the eye, the original video cut was about 16 min long. As you can see we did have some fun. I may post some of the out takes at some time in the future. I thought you might want to cover the process here and that's what I went for. Thanks to http://www.youtube.com/user/Davidsfarm for the procedure for this and hopefully for letting me post this as a video response to his video. If I think of anything else I think you need to know with this I'll post it later, for now I have to run. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay Dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Burping The Cooling System
How To Use A Spill Free Funnel to burp your radiator Lisle 24610 Spill-Free Funnel cost $24 shipped on ebay.

How To Remove Wheel Locks Without a Key - EricTheCarGuy
How To Remove Wheel Locks Without a Key - EricTheCarGuy As I state in the video DONOT use this information for illegal purposes, it is intended to HELP you if you happen to loose your wheel lock key. As with most things that I do with cars this didn't go exactly as planned, in fact there is a significant amount of time between me getting the socket hammered onto the wheel lock and when it actually broke loose, I took a break to work on other things. I also said in the video that they make a special socket for removing wheel locks that makes this a lot easier, do a search for this and you will probably find a set of them. If you can't find one of these sockets then this might be an option for you to try. The best thing is to try not to loose the lock key in the first place but I realize that this may not always be possible so I made this video for you. Stop by and see me at EricTheCarGuy.com anytime and post video or text responses at will. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

$0.00 Performance Upgrade - EricTheCarGuy
$0.00 Performance Upgrade - EricTheCarGuy http://www.ericthecarguy.com/ Yea, it's true something as simple as this can increase performance, just make sure you don't get it too tight and have fun impressing your friends with this cool little trick. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

AC System Basics - EricTheCarGuy
This is a kind of video response to a question I got from RadicalComedy about servicing her AC system. Keep in mind that this is a very basic overview of the components and operation of the AC system. In future installments I plan to get more in depth about the operation and function of these parts but for now I think 6 minutes of your time is enough. Visit RadicalComedy's channel http://www.youtube.com/user/RadicalComedy Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy Stay dirty and cool if you can. ETCG

How to Replace a Master Cylinder - EricTheCarGuy
So my brother tells me his car is not stopping and the brake pedal is slowly sinking to the floor when he is at a stop light, my solution, a master cylinder replacement. Join me on this quest to make the roads a little bit safer by helping my brother with this little problem. I know I do lots of stuff on Honda's and Acura's but I do work on other things too and we will get to those in the near future but for now I have a stock of footage of these cars so deal with it. I am trying to help you after all, and I hope that I do. If you really want me to do something I have 2 words, video response. Try that and I will pay attention. I get tons of text things but no video, I think I'm worth it, don't you? Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy As always, stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

What is VTEC and How Does it Work? - EricTheCarGuy
What is VTEC and How Does it Work? - EricTheCarGuy I've been editing some full length video this week and I came across this bit from a car I worked on last spring. The animations are courtesy Honda Motor Company, thanks guys. I think the title is self explanatory and I hope the video makes it a little clearer for those who are curious about this system and how it works. I've had a couple of requests for this and I hope this answers those questions. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG

How To Find Suspension Noises 101 - EricTheCarGuy
How To Find Suspension Noises 101 - EricTheCarGuy http://www.ericthecarguy.com/ This is probably one of the most popular questions that I get so I'm happy to bring you this one because I know it's going to save me some typing. I may have missed a couple of things but I believe I've covered the basics on this one so this video should give you more than enough to start with. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.