Header Collector Science
I tested a simulated automotive header with some very interesting results.
Groutaone official race gear found here http://www.groutaone.com/
Mustang ARH Long Tube Headers Installation 2011-2014
If you're looking to gain more performance from your 2011-2014 Mustang GT or Boss 302, Long Tube
Headers from American Racing Headers can provide some big help. With street
and off-road versions available, performance can increase up to 32 RWHP
using stock mufflers and without a tune.
Today, Bill installs a 1-7/8" Long Tube Headers with 3" Catted X-Pipe into
a 2011 Mustang GT. This kit
features 100% leak free one-piece long tube design, 3/8" thick flanges with
tig welded & hand ported inlets and 1-7/8" primaries to accommodate
normally aspirated or supercharged applications. It includes merge
collectors with scavenger spokes, direct bolt-in catted X-pipe, Ultra
high-flow 200 cell metallic substrate cats, and a pair of oxygen sensor
extension and averages 6-8 hours for installation. With this video, Bill
shows you how to do it yourself!
See more 2010-2014 Mustang
Long Tube Headers from CJ Pony Parts:
See more American Racing Headers products from CJ Pony Parts:
Mustang Exhaust Headers (05-10 Mustang GT) Install & Overview - Polished Silver Ceramic
BBK Shorty Tuned Length 2005-2010 Mustang 4.6 GT 3V Exhaust headers (High Temp Polished Silver
Ceramic Finish) are designed, manufactured in the USA with 1 5/8" CNC
mandrel bent tubing for un restrictive airflow. Built with 3/8" laser cut
flanges for added strength and durability, these performance high flow
headers are robotic-ally welded to ensure top quality and a leak free fit.
All BBK Mustang shorty
tuned length Exhaust headers for the
2005-2010 4.6L GT 3V Ford Mustang have been designed and Dyno tested at the BBK
R&D HQ in Southern California.
BBK's Mustang headers offer
distinctive quality that guarantees many years of top performance and they
are available in two finishes - Chrome or high temp polished silver ceramic
for better durability and better lasting looks.
All these performance MustangExhaust headers are direct fit and bolt on
easily -- all new gaskets and hardware are included with every kit.
For more information on these Exhaust
headers Part # 16120 Polished Silver Ceramic Finish please Click This Link:
One Sick Z06 Short Film! (Warning: LOUD ) Best cammed Corvette
Music By: Bassnector - Timestretch, please support these awesome artist @
Audio content for this video belongs to the respective recording artist and
record label. No money was exchanged and was done purely on appreciation
for the people in the video and appreciation to the respective artist as a
Follow me @ Facebook
One Wicked Z06! Vote Best Z06 Video On Youtube!
Done on JV Private road.
**More Video on my Main channel!**
Mods are - K&N CAI, Comp Cam, AR Catless Headers & AR X-Pipe, Corsa
Axle-Back and yes those are Nitto NT05R's in the back and regular 05's in
the front. Tuned by Lethal Performance. 500++WHP. :)
Add 30 horsepower to any Mustang ( in 5min )
Checkout HD photos & a complete list of My Mustang upgrades w/costs on my blog:
http://homeadditions.blogspot.com *[Complete Part List Below]* After this
modification the quarter mile dropped from 14.4 @ 103mph to 13.8 and from
106mph! This alone was worth the $500 Superchip purchase.
Here is a list of the upgrades at the time this video was taken (These
aftermarket parts add up quickly):
1999 Ford Mustang GT
Convertible *Custom ordered all options $27,709.00
Viper 300 ESP alarm with radar sensor and power window roll-ups $455.80
Paint and install Saleen Body Kit $1,000.00
Bassani X-pipe with 2 hi-flow cats $439.99
*Installation X-pipe $150.00
S281 Saleen wing with brake light $231.21
Saleen Speedster Light Bar $471.41
Saleen Decals $33.22
Saleen Windshield Decal $30.58
Tints 35% silver rear/50% silver sides $116.60
Flowmaster Mufflers $212.00
Underdrive Pulleys $127.15
*Installation Pulleys $100.00
Saleen Chrome Center caps $59.99
Custom Programing for Superchip $185.50
SuperChip for ECU $291.50
Saleen Body Kit $1,700.00
Saleen License Plate Frame $20.00
Centerforce Dual Friction Clutch $355.00
*Installation of Clutch $600.00
Ford Racing Stut Tower Brace $110.72
Bilstien shocks $600.00
*Instalaltion Bilstien shocks & struts $300.00
Steeda Tri-ax shifter $200.00
Saleen STYLE 18" Chrome Wheels $1,499.00
Brembo Front Brakes $1,500.00
Brembo Slotted Rotors w/pads rear $238.77
*Installation Rear Rotors and pads $100.00
Ebach progressive lowering springs $300.00
*Installation Ebach Springs $174.90
HID Headlight Conversion Kit $279.95
Saleen Hood $900.00
*Paint hood $530.00
MAF Conversion to 80mm $100.00
EGR Spacer $50.00
K&N Air Filter $60.00
70 MM Ford Racing Trottle Body $300.00
Custom Ram Air $50.00
Whiteface gauges with AC template $50
JVC KD-HDR50 HD Radio CD MP3 USB IPOD $133
Optima Yellowtop batter and trunk relocation $250
I used a Gtech Pro to test my quarter mile before and after. Before the
Superchip I was doing 14.4 at 103mph, after the Superchip I did 13.8 at
106mph. For each test I did 3 runs and took an average.
In less than 15 minutes and a few hundred bucks, you can add 30 horsepower or more depending
on the model year of your Ford Mustang. My Mustang is an upgraded 1999 GT and I
had my Superchip custom programmed for all the modifications that I made to
The Superchips unit plugs right into the back of the stock car computer ECU
(engine control unit).
*Don't forget to disconnect your car battery for 10 minutes during this
upgrade; this will allow the car computer to recalibrate itself. You know
that you have done a proper job resetting your computer if when you start
your car, you notice that all the gauge needles sweep to the left then
If you have any questions, shoot me a comment and thanks for watching.
***Please subscribe to my channel and I'll make more videos like this!
Video sponsor: http://www.simplyadditions.com/
EXCLUSIVE: 2015 Ford Mustang Reveal with AmericanMuscle.com
Go Behind the Scenes with the crew from AmericanMuscle.com to the big 2015
Ford Mustang Reveal in New
York City! http://www.americanmuscle.com/2015-Mustang-news.html
We have All-Access Passes to the 50th Anniversary Unveiling of the Ford Mustang in the city where it
was originally unveiled at the World's Fair!
We talk to some of the head designers about their part in making the new
S550 Mustang more powerful,
lighter, better handling and all around a high-performance vehicle while
still maintaining the legacy and heritage of the iconic Mustang name.
Some of the points included the introduction of the new EcoBoost 2.3L Engine, the return of the 5.0L
Coyote GT engine with a nice Boost
Independent Rear Suspension, an all new Front Suspension, huge facelift and
Not only is the new 2015 Ford Mustang the most modern version of
the Mustang we've seen,
it's also the highest performing in alot of ways. It's lighter and roomier
at the same time thanks to what the engineers refer to as "shrink wrapping"
the car to maintain weight.
For all of the details of the new 2015 Ford Mustang, make sure to head over to
the AmericanMuscle.com Blog.
For all things Mustang,
keep it right here at AmericanMuscle...
Kooks Custom Headers Brand New Shop Tour in Statesville, North Carolina!!!
Kooks Custom headers opened their doors in Statesville, NC in July of 2009.
The shop consists of 45,000 square feet and is situated on over 11 acres
of property. Kooks Headers is a family owned and operated company which
has prided itself on making the highest, most horsepower production header
and Exhaust systems for over 45 years.
Check out KooksHeaders.com or call 866-586-KOOK (5665) for more
information or to order your system today!
2006 Ford Mustang Exhaust Install & Sound Tests
Installing and sound testing three different flowmaster and Hushpower Exhaust systems on this 2006 Ford Mustang. First the Hushpower Axle
Back Exhaust System, then Flowmasters
3" American Thunder Cat-Back Exhaust
System and finally the Flowmaster American Thunder Axle-Back System.
Mustang 4.6 GT Pulley Kit Install (2005-2010) Review
Understand how Mustang GT
performance under drive pulleys work. See how they install and replace your
stock pulleys and see the MM&FF editors upgrade their Mustang with a set on their project
This part of the series shows the installation and testing of a set of BBK
Aluminum under drive pulleys on a 2005-2010 Mustang GT.
kit.html - Check us out on facebook here:
Mustang GT Throttle Body Install (2005-2010) Review
BBK's 2005-2010 Mustang GT
throttle bodies are designed to increase airflow and improve horsepower from between
15-20 RWHP & an incredible 20-25 RWTQ depending on vehicle and application.
BBK 2010 Mustang GT Twin
62mm Power Plus Series Throttle Body is a direct Fit with NO modifications
required and can be installed by anyone.
y.html - Check us out on facebook here:
All BBK Performance Power+Plus Series throttle bodies are CNC machined from
high quality 356 aluminum castings to ensure perfect OEM quality and fit
every time. Features like OEM die stamped throttle linkages, double sealed
bearings, o ringed throttle shafts and new electronic controlled injection
molded plastic gear assemblies for the new modern drive by wire
applications, make BBK throttle bodies number one in performance and