Tutorial - How to wire interior LED's to a toggle switch
Thanks for watching the other video guys! As i promised here is the actual
tutorial. I know it wasn't the best tutorial so ask me in the comments if
you have any questions. LED's are from LEDglow.com, the rest of the
supplies are from autozone.
PLEASE READ THROUGH THE COMMENTS BEFORE ASKING QUESTIONS.
How to Tint a Door Window
this is an instructional video on how to tint a door window. it was done in
LLumar ATC 40% complete tint including a windshield strip.
Replacing Car Interior Lights with LED Lights
This video is a simple and short tutorial on how to put in an LED light
into a festoon socket in a car which is really easy... However, i as well
give a description of the Light. (Watts and Lumens given off & Volts and
Amps that are Needed)
Ultra Thin Audi Style Side Glow Dual Color Switchback Flexible LED Strip Lights
Brought to you by http://www.iJDMTOY.com
One pair Side Glow Audi Style Switchback LED strip lights (2 pieces) to
dress up the headlights similar to the new Audi A5 or R8 Style.
Each switchback LED strip has 9 pieces Xenon White LED lights to be used as
daytime running lights and 9 pieces Amber Yellow LED lights to be used as
turn signal lights.
The installation is SUPER EASY. Simply peel the back 3M double-sided tape
and apply it underneath the headlights or under the bumper.
For more pictures and information about Switchback Flexible LED Strip
Lights, check out the product page @ http://bit.ly/wAsZUs
Led Fog Light Install for Honda Civic will work on all cars
My DIY install of LED fog lights on a 2008 Honda Civic. This will work on
all cars, the only difference will be where you mount them and what fuse
you use for acc power.
get your own
Chrysler 300c LED DRL install
LED build http://www.youtube.com/watch?v=cCoJUNrvCR0
Blinglights.com 9006 Plug and Play HID install
Installation of a 9006 plug and play HID Kit from blinglights.com. Receive
a 15% discount and free shipping an your entire order at
www.blinglights.com when you use discount code NEXT15
LED Underbody Glow Strip Installation How-To & Demonstration
This video will show you how to install the LED Underbody Glow Strips
offered by P.S.Team on eBay and demonstrates the 15 modes and seven colors
of the underbody glow kit. This installation was done on an Audi A3,
however the principles of installation are the same for virtually every
vehicle. Follow along with our installation or just enjoy the light show.
For installation, you'll need to have the following items which are not
included with the kit:
3M Doublesided Automotive Adhesive Tape
Videography & Voiceover by "Nitro Nick" Gregson
Smart LED Daytime Running Light Installation Video
This video is of me while I was installing my S-Mann LED Daytime Running
Lights in my 2008 smart fortwo. Pretty simple job with a nice outcome.
Please leave your comments and give this video a thumbs up. Thank You.
Great little Saturday project. Music by Infected Mushroom- Spiritual
How To Clean Civic Type R Headlights with Toothpaste
We show you how to clean the misty haze layer that can appear on your
plastic headlight lenses over time making them look dull and transform them
into new shiny headlights!
All you need is toothpaste and a cloth!
Click here and SUBSCRIBE for more videos like this!
LIKE our CTR EP3 Facebook Page:
LIKE our TechTuners Facebook Page:
Civic Type R Oil Change Tutorial
Remove & Paint Civic Type R Rocker Cover
How To Replace Civic Side Lights (Facelift EP EP3 2004 - 2005)
Heko Wind Deflector Civic Type R EP3 - Fitting Tutorial
Watch our VTEC Compilation:
Red JDM Civic Type R Floor Mats
Led Light Strip Test
Item link == http://bit.ly/71WUYi ==
1Carlight.com is a Hongkong online store with factory in Mainland China,
specialized in production of various automotive lighting and with marketing
office in Guangzhou, China.
Also, I'm a eBay power seller! and ioffer seller!
== http://1CarLight.com ==
== http://1carlight.ioffer.com ==
Our product range covers car lights, motorcycle lights, halogen bulbs for
headlight, SMD led lights, miniature bulbs for auxiliary car light, HID
kit, truck light, car strobe light, fog lights, day driving lamp, neon car
lights, car under body light, car emergency lighting,
car dome lamp, led light strip, led bulbs, led accessories and sealed
How to Install Footwell Lighting that Fades with Dome Light in a 2006-current Honda Civic
Cost: Around $20-30 Difficulty: Intermediate Required Skills:
partial disassembly of a car's interior, and use of a soldering iron
Looking for the giant clock video?
UPDATE: According to various comments, this will work for the current
Honda Civic (or at least 2012 models) and will also work for the sedan.
Make sure you test the wires first, though, in case something is different.
If you're going to try it on these models, make sure you find out how to
remove the paneling--the process may have changed. Again, this video was
made specifically for the North American 8th generation Civic Coupe, which
covers model years 2006-2011. You will likely have to alter the procedure
in some way for all other models.
This is my first how-to video, so please bear that in mind when you watch
I've been wanting to install footwell lighting in my car (a 2009 Civic
Coupe) for a little while, and instead of just doing it, I decided that I
should record my progress and make a video of it for YouTube. Well, here
This modification wasn't nearly as difficult as it was time consuming. I
mention in the video that it takes 1-2 hours to complete, however this is
if you have access to all your materials at one time. I spread this out
over a few days and ended up spending much more time then I thought it
would take, just because of my start-and-stop schedule.
Basically, what makes these footwell lights unique is that they are tapped
from the dome light's power, so they will dim in and out with it. It took
me a very long time to find the information on the series of tubes that is
the Internet that showed where the dome light's wires were. I have to
thank the people at 8thcivic.com for contributing to a forum that
eventually gave me all the info I needed.
Some users have reported compatibility issues with the wire
taps/scotchlocks and the light strips. Ii is my recommendation to solder
wires directly to the strips, either using the solder pads or the wires
that may have come with your strips. However, for those who are
apprehensive of using a soldering iron (after all it can be dangerous), be
advised that you may have to use two sets of wire taps--one to make new
wires from the OEM wires, and another to tap your lights to these new
wires. Again, I always recommend soldering since it provides a better
connection, both electrically and mechanically. But if you want to avoid
soldering, just remember that you may need to find away around various
TO ADD A SEPARATE SET OF LIGHTS that stays on whenever the ignition is on,
use a fuse tap (which can be found at most auto parts stores) of the
correct size. If I remember correctly, this is for the ATM fuses. The
fuse tap does not need to be low-profile like the fuses are in the car.
Tap the radio fuse, or any other fuse that does not receive power when the
key is removed. Technically, the lights will be on when the key is in the
ACC or ON positions. The radio fuse was the only fuse that I found worked.
Use the smallest size fuse that came with the fuse tap for your new
lights. Then, wire the positive for these lights to the fuse tap and
ground them to something metal under the dashboard. I highlighted what I
used to make a ground at 12:38--I simply used a zip-tie and some bare wire,
looping the wire around the ring and securing it with the zip-tie.
DISCLAIMER: I will not be responsible for any damage that you cause to
your vehicle as a result of performing this modification, nor will I be
responsible for any voiding of warranties that may result from this
modification, and nor will I be responsible for any local laws that may be
broken by the use of footwell lighting. Since this footwell lighting only
operates when a door is opened (the dome light switch does not make the
footwell lights come on) or the car is being unlocked from the outside, I
doubt it would break any laws. However, if there are laws prohibiting
footwell lighting in your area, any fines or other consequences of breaking
the laws shall not be my responsibility.
YOU CAN NOW GET A 5 METER STRIP OF THESE LIGHTS FOR ABOUT $15 ON AMAZON!
Just search for LED Strip lights or Tape lights. You can also find them in
waterproof versions. If you want to do more projects with these lights,
look for them on Amazon. If you would like to add LED underglow, which I
explain how to do in another video, I would order a waterproof 5 meter
reel, and use a small portion for the footwell lights.
Besides the actual LEDs, most of the other materials required can be found
around the house. Remember to always remove the fuse to the circuit you'll
be working on, and be sure to check that the fuse you removed does indeed
protect your desired circuit.
Thanks for watching!
Trunk light video: http://www.youtube.com/watch?v=k_HXqIdIuMo
Headlight Lens Restore using Toothpaste!
CGHQ Website: http://www.classicgamershq.com
Headlight lens restoration using regular toothpaste is real. It doesn't
take much effort, but the type or brand of toothpaste does make a
difference. Watch to see the results i came up with.