This video will show you several troubleshooting methods to do when you are
having problems installing your HID's. This includes: Light's not going,
lights turning on then turning off, and lights flickering.
How to Install an HID Kit from Beginning to End
These are step-by-step instructions on how to install an HID Kit. This
video covers what to check for when you receive your HID Kit, how to
properly disconnect your OEM Headlights prior to install, disconnect your
OEM halogens, wire the HID Kit harness to the factory headlight harness
without cutting or splicing any wires, securely mount the HID ballasts and
shows a HID Kit installed and fully functional.
Ford Ranger HID Xentec 6000K Test Drive
New HID Headlights in the 1991 Ford Ranger. Nice and wide lenses help out.
Quality is not as good as expected for the video but I hope you enjoy it
Xentec 9004 6000K slim HID kit issues
This video was uploaded from an Android phone.
i purchased this kit off ebay for $34 from ebay seller "hidlighting168"
the kit supposedly had a warranty, however the seller chooses not to
respond to my email. now debating whether to report the seller to IC3
because i feel defrauded
The seller sent me a new pair of bulbs which seem to be ALOT less shaky.
However, i will be replacing the entire kit so i can have dual HID beams
cause current kit is low beams only. Also planning on replacing the amber
park lights wit 6000k leds, same wit the fog lights as well.
BMW E46 HID Flicker Problem
Update: I found the fix for this issue. It's actually related to the tail
light harness. Check your tail light harness for the brown ground wire
contact to be melted & burned out. This is a known issue with the harness,
and can be fixed with a harness repair kit from Bavauto.
Recently my E46's HIDs started flickering. They are OEM HIDs, and are the
original units that came with the car. Both sides always flash together,
never one side or the other. It happens whether the car's engine is
running or not. If the brake pedal is pushed, they start flashing steadily
about once a second. In any other circumstance it's sporatic.
For full details, visit http://cnvr.cc/hidflicker
Thanks in advance for any advice on a fix!
How to: Upgrade From a Plug n Play HID kit to a High Performance Headlight Projector Retrofit
The four main components required to upgrade from a plug n play HID kit to
a full xenon or bi-xenon retrofit are gone over here.
The projector: the key component that collects and focuses the intense
light from the bulb into a proper beam pattern.
The D2S bulb: standard bulb type for all high performance HID projectors
The AMP/D2S adapters: the converter cables that allow you to run a D2S bulb
with a set of existing "HID kit" / aftermarket ballasts.
the Projector: focuses the light from the bulb into a strong, uniformly lit
beam pattern with a proper upper light cutoff line to light up the road
perfectly. The most important part!
D2S bulb: required bulb type for use in true xenon/bi-xenon headlight
projectors. You cannot re-use your generic 9006, h1, h4, (etc) HID kit
bulbs and expect a good output.
AMP/D2S ballast adapters: convert your generic HID kit ballasts for
compatibility with the base of the D2S bulbs.
The shrouds or bezels: simply put, the trim piece that covers the projector
after it has been retrofitted into your headlights. Our OEM designs make
for a finished, factory look.
Xentec 30000k HIDs
Xentec 30000k HID kit in stock Explorer housing. Clear housing coming in
DIY HID Xenon Install: Toyota Camry 2007-2011+
How to Install HID on a Toyota Camry
Do it Yourself Installation of HID Xenon Headlights on a 2010 Toyota Camry.
This installation will work on the following year models
2007, 2008, 2009, 2010
Direct Product Link:
HID Bulb Type: Philips H11
Kit used: XenonSupply Premium Kit
Available on www.XenonSupply.com
Brought to you by XenonSupply.com
For the quickest response please submit questions to