Rear brake job - inside the rear caliper on a vw audi parking brake and adjustment
This video shows how the vw audi rear caliper works. There is a parking brake adjustment screw inside the brake piston. This is why you have to turn the caliper when doing a brake job.
ECS Tuning: VW MKV Rear Brakes Pad and Rotor DIY
Available At: http://www.ecstuning.com/?utm_source=Youtube
Our new and expanded brake parts inventory includes brake parts from both original equipment and name brand aftermarket suppliers; quality products from the most trusted suppliers in the business.
Not sure what you need or how to do it? Watch our new installation video or download a step-by-step how-to installation guide.
Great parts. Detailed instructions. A win-win.
This tutorial is provided as a courtesy by ECS Tuning.
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.
How to remove brakes & rotors on a VW Jetta
This is 2003 Volkswagon Jetta. The wrench for the caliper bolts is a 7mm allen wrench, not a hex key like I kept saying. The tapping of the set screw with the ballpeen hammers is to vibrate the rust from the inside threads on the screw. I tried to remove the screw without tapping it first and I almost stripped it. After about 10 hits with the hammer, it came right out. I upgraded brake pads to ceramic pads because they produce a lot less brake dust.
G-scan VW/Audi Electronic Parking Brake
G-scan demonstration video series 006.
Another eye-catching demonstration on the VW/Audi's EPB (Electronic Parking Brake) system -- G-scan releases the EPB for the brake pad replacement.
The file was shot on a Volkswagen Passat 2010MY.
Electro-Mechanical Parking Brake (EPB), rear brake pad service
How to do rear brakes on VW and Audi vehicles with the EPB system. More information can be found here:
http://wiki.ross-tech.com/wiki/index.php/Working_on_the_Electro-Mechanical_Parking_Brake_%28EPB%29
Fixing Your Volkswagen: Changing the Rear Brake Pads
A short video showing how to change the rear brake pads on any 1985-1998 Volkswagen with rear disc brakes. Prepared for Technical Reports class at Chattanooga State Community College.
Rebuilding brake calipers
Follow along while I rebuild my Porsche 944 turbo S calipers (made by Brembo).
Seals are available from Stop Tech: http://www.stoptech.com/Products/brake_accessories.shtml
Brake piston wrench: http://www.genesisparts.com/index.cfm?tpc=Genesis_Brake_Caliper_Piston_Removal_Wrenches&form_prod_id=5&action=product
VW MK5 MK4 Rear Brake Pad Replacement
As the title says, rear brake pad replacement on VW MK5 (2009) Jetta. Pretty straight-forward except for the ratchet type hand brake mechanism/adjuster. You can't push the piston in without damaging the caliper if you don't either use the proper tool or rotate the piston as you push it in.
Brake Job Series - Rear Caliper Replacement
http://www.autozone.com/autozone/brakeJob/brakeJob.jsp
In the fifth chapter of the AutoZone Complete Car Care - Brake Job Series, Bruce Bonebrake shows you how to inspect and install rear calipers with integrated parking brake.
Get everything you need to do the job right at http://www.autozone.com
914 Rear Caliper DIY Kit Video
Published on Dec 12, 2012
If you purchased one of our 914 U-DO-IT rear caliper kit, this is the video for you. It's also a great way for the DIY 914 mechanic to learn how to rebuild your 914 rear calipers the proper way.
Some things to note: We made this video using tools you should have at your disposal. This will help you see how the end result can turn out. On our caliper restorations, every part gets re-plated with zinc dichromate just like the ATE factory did back in the 70's. For the purpose of this video, we used paint for the arm and spring so you can see how "your" results can turn out. The caliper at the end of the video is the caliper we built step by step in the video (yes, your calipers should look that good when you're done!!)
If you have "any" questions while you're building your kit please feel free to call us at 855-STOP-101 (that's 855-786-7101). We're always more than happy to help our customers achieve success!
Here's a link to the kit if you are interested in having amazing calipers on your 914:
http://www.pmbperformance.com/catalog/item/4741552/9621098.htm
push piston back on calipers.home made tool.
a home made...tool....use jacks stands when under car...pump breaks a few times after finished installing before you move car to get pressure up...
Removing Brake Rotor Screws That Won't Come Out - EricTheCarGuy
Removing Brake Rotor Screws That Won't Come Out - EricTheCarGuy
I think the title covers this one. Honda's are famous for this so I made this little video to help you should you be in this situation. Wear your safety glasses when you do this or whenever you hit things, getting crap in your eye sucks, trust me. Impact drivers can be found at your local tool supplier. If you don't have a hammer I don't know what to tell you. This doesn't seem to require a long explanation so I'm going to stop typing now.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
E30 brake caliper rebuild
This is a how to video on rebuild ATE style rear calipers on your E30
Rebuild kit from here: http://www.autohausaz.com/search/product.aspx?sid=5tfyedeckg44yb34hyta5min&makeid=800003@BMW&modelid=1011654@325E&year=1986&cid=14@Brake%20%26%20Wheel%20Hub&gid=1720@Brake%20Caliper%20Repair%20Kit
Tools:
7mm allen socket
flat tip
hammer
molly lube
8mm open ended wrench
