How To Install Replace Air Temperature Door Actuator Explorer Mountaineer 98-01 1AAuto.com
http://www.1aauto.com/1A/HeatingandACControls/Ford/Explorer/1AHCX00034 1A Auto shows you how to replace the vent door actuator on a 1998 Ford Explorer. This process is the same for 1998-2001 Ford Explorer, 2001-2005 Sport Trac, 2001-2003 Explorer Sport, 1998-2000 2005-2007 Ranger, 1998-2001 Mercury Mountaineer, and similar for 2002-2004 Ford Expedition and 2002-2004 Lincoln Navigator.
How To Install Replace Power Door Lock Actuator Ford Explorer Lincoln Mercury 88-03 1AAuto.com
http://www.1aauto.com/1A/DoorLockActuators/Ford/Explorer/1ADRK00009
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped rear power door lock actuator. The procedure is the same for many Ford, Lincoln, and Mercury Models from the early 1980's to the early 2000's.
How To Install Replace Air Temperature Control Silverado Suburban Sierra 99-06 1AAuto.com
http://www.1aauto.com/1A/HeatingandACControls/GMC/Sierra/1AHCX00042
1A Auto Shows you how to install, repair, fix, change or replace a broken or not working AC/Heater air temperature control. This video is applicable to 1999-2006 Chevy Silverado, Sierra, and Suburban models.
How To Install Replace Power Window Regulator Ford Explorer Sport Trac Mountaineer 91-05 1AAuto.com
http://www.1aauto.com/1A/WindowRegulators/Ford/Explorer/1AWRK00467
1A Auto shows you how to repair, install, fix, change or replace a broken, cracked, damaged, slow-moving, or stuck power window regulator and motor. This video is applicable to 1991-2001 Ford Explorer, 2001-2003 Explorer Sport, 2002-2005 Explorer Sport Trac, 1991-1994 Mazda Navajo, and 1997-2001 Mercury Mountaineer models. This is a pretty easy repair for the do it yourself person.
02 Ford Explorer Heat Blend Door Actuator Simple Fix - No Tools Needed
This is a 02 Ford Explorer that has a broken and worn heat blend door actuator. The labor at a dealership with parts is approx $700-800 if you take it to the pros, The cost of the part is approx $65.00 if you want to do it yourself, or you can give this a try and save even more.
The part I will be referring to later in the video is a plastic flap, which is approximately 3" long and is located almost directly behind the wires you see in the video along the edge of the wall compartment. It needs to be pushed down, and you will hear it as it reaches the correct position.
Once you locate this, it will only take a few seconds to change in the future.
The blend door will easily work with the air condition control knobs, but once you switch it to cold air, you will need to switch this back manually as in the video.
Hope this tip helps.
Governor Pressure Solenoid & Sensor Replacement
Basic Dis-Assembly, and replacement
Pressure Solenoid , and Pressure Transducer (Sensor)
This Covers All the Below Dodge & Jeep Automatic Transmissions:
A500 , 42RE , 44RE
A518 , 46RE
A618 , 47RE
48RE
Visit Us @
www.CascadeTransmissionParts.com
ford F150 TSB 08-23-06
Simple overview of how to fix your friggin broken hot air blowing F150. Heat contol knob seems to have two positions. Hot and cold. This should bring it back to what you can control. It is a simple motor that is supposed to move to where you set the control.
How to Find out your keypad door code for a Ford Explorer 1998 XLT
This Video is to help you to find the code of your keypad door, so you dont have to take it to the dealer and paid a big ammount of money for something is very simple.
To find your code you have to go to your trunk on the driver side is a comparment to place your jack, inside of that comparment you will see a control module this control your keypad on the side of that control is a white sticker and big number bold print, this is the code of your keypad to open your door another solution is on the manual of the truck. good luck and please comment.
Locating the blend door flap inside the glove box of 02 Ford Explorer
A follow up video to help locate the plastic flap for the heat blend door. The flap is approx 1 1/2" wide, and will need to be flipped straight down / to the left. The blend door should actually make a flapping sound if you have your a/c on. It may actually vibrate the piece and just hone in on the sound. Once you find this, it will be very easy to locate on the second try.
Lincoln Blend door.AVI
Lincoln Blend Door repair. 1998-2002 Lincoln Towncar blend door has plastic receiving tube the actuator fits into. It will break at some. Most noted for a clicking noise in the dash and the A/C and or heater will not function properly.......here is a fix.
