The gravel spreader is a well-proven product that is usually regarded as standard equipment for road graders. The gravel spreader has a hydraulic lift with a shock-absorbing operating mechanism, and the blade position can be adjusted sideways. The draw beam has extra reinforced couplings and bushed joints to minimise maintenance.
• As standard, the gravel spreader is delivered with flat, reversible cutters without teeth and a hitch that fits VV´s coupling plate
• 4 hydraulic hoses + Tema 5011 with guard
• Pivot wheel assembly (solid rubber wheels)
• Hitch with hooks for Stora BM
• Hydraulic control of movable blade
• Hydraulic control of angle adjustment
• Quick hitch for road grader
GradeBoss™ by B&W
GradeBoss http://www.turnoverball.com/products/atv/gradeboss is a premier
grader produced by B&W. As shown in the video, hooking up the ATV accessory
and adjusting the height is easy and simple to do.
Railcom Norge byter slipers med Rosenqvist rail ABs senaste nyhet..SB 60
med automatisk befästare för Pandrol FC/FC..
Mählers Snow Loader/Blower
The Mählers Snow Loader is an unsurpassed tool when it comes to rapidly
removing large amounts of snow. It takes less than a minute to fill a truck
(about 25 cubic metres). With 25 loads a day, every truck can remove over
600 cubic metres of snow from streets and squares.
Product sheet: http://bit.ly/h5pOlA
Volvo G946 väghyvel och Mählers sidovinge i Lycksele
Väghyvel G946 från Volvo med sidovinge och bladstopp från Mählers.
Anders Risberg, Lycksele berättar om sitt möte med Volvo G946 med
allhjulsdrift i arbete på skogsbilvägar vintertid åt skogsbolag.
Tvåspakssystem för hydrauliken gör den fin och följsam...
AggreScreed - Gravel Grader - Road Building - Road Construction - Gravel Screed - Grading Roads
TerraTec Industries, Inc. has developed the highly innovative AggreScreedTM
a bulldozer attachment used to lay gravel for roads, runways, parking
lots, etc. without the use of stakes and does so in a single pass
minimizing gravel segregation and breakage. Attachable to virtually any
straight-blade bulldozer (125-250 horsepower recommended) the
16-foot AggreScreed blade adjusts to 24 feet in two-foot increments. Its
capable of laying gravel at depths from zero to 15 inches and can create up
to a three-and-a-half percent crown. Reducing the number of passes needed
to reach the required depth means huge potential savings in labor, material
and equipment costs. Find out more about how to cut your road building
costs at www.terratecind.com.
Extreme Slope Grading: Deere 772D grader
Blade hand: " How the hell am I supposed to cut a 0.5:1 at the top of that
Me: "You just hold this here camera and watch you might just learn
Showing my blade operator how to cut steep slopes we are cutting sub-grade
for the channel that the rip rap sits in on the slope there is a 0.5:1 at
the top for 2.5 ft then a 4:1 for 80-110 ft (depending on the floor
elevation) then a 10ft flat bench and 4:1 for 12- 24 ft down to the floor (
again depending on the floor elev.)
Mählers side plow/plough SVH-4 for Graders
The SVH-4 side plough for road graders is the most versatile combined snow
clearer you will find. A road grader with a hydraulic side plough is a
flexible and efficient solution, especially in urban areas.
Grader School - Ditching in 2009
This rather long video shows me learning how to operate a road grader back
in '09. Just skip the long sequences if it gets too boring, as it's almost
a half hour long.
In this video, I was learning how to scrape out and back slope a ditch with
the mould board.
Any constructive pointers from REAL grader operators are welcome.
If you are looking for a good grader instructor, I found Cade Fox to be
both knowledgeable and patient with my questions, etc. Here's the site for
the school: http://www.foxheavyequipmentoperator.com/