5.0 GT FOX Body Mustang with E303 Cam and Flowmaster Exhaust
This is my 1990 Ford Mustang GT. Stock 5.0. Ford Racing E303 Cam, Stock Valve Train, Professional Products 75mm Throttle Body with hogged out gasket matched upper intake 58mm ported to 75mm, BBK Cold Air intake, Underdrive Pullies, Stock Headers, BBK H-Pipe, Flowmaster Delta Flow 50 Series 2.5" inlet/outlet (cut off, no tailpipes) Timing is set at 14 degrees. Idle is at 800 RPM. Cobra 5spd, 4:10 Richmond gears laced on a Detroit Tru-Trac Dif. Ive lightened the car down to 2930lbs without me in it of course. With 26X10.0X15 Mickey Thompson E/T bolted to a set of Centerline Convo PRO's, This set up got me to a 13.1 1/4 mile E/T. Launch @ 6500rpm. No Nitrous!
5.0 Mustang GT 1 Year Later
Here is my stang after 1 year of being modified top to bottom. Be sure to
see my before video!!!! Thanks to everyone who helped make this possible
and a special thanks to Cory and Jim Drennan
Upset pregnant girlfriend in 5.0 mustang
UPDATE: If its not obvious this video is pretty old now. I had just got
done getting the car back together. ( pulled the motor, and trans, rebuilt
the motor, put it back together. I do all my own work.) I didn't take the
time to put the shifter and console back together, because im more
concirend how the car drive's.... then looks.
The car was tuned after this video and picked up around 35HP. After that,
this video makes the car look SLOW.
putting a Vortech Supercharger on the
car now.... for some REAL power.
Went for a drive, and pissed off my girlfriend in the process. At the end
of the video I race a F250 diesel that was heavily modified.
Mustang Week 08 Fox Body Cruise
This is a cool thing Bones and the crew puts together every year. Too bad I
couldn't make it because of overheating issues. Got some killer video
1993 Mustang F303 Cam
Car sat for 2 weeks so it's a little choked up in this video. 93 Fox with a
308, GT40 Y heads, GT 40 upper and lower, MAC CAI, F303 Cam, 1.7 Crane
Roller Rockers, Forged TRW Pistons, TFS Main Girdle, HD T5, centerforce
clutch, 4.10 gears, MAC Upper and Lower Rear Control Arms, Tubular Subframe
connectors and too much more to list. More to come. Dyno day on the 4th of April to
see what she'll do.
Fox Body Mustang with Bassani Exhaust
1993 5.0L Mustang with
Bassani stainless Exhaust. Comparison
video: (1) Bassani catback with baffles (2) Bassani catted x-pipe & catback
with baffles (3) Bassani catted x-pipe & catback without baffles. Includes
sound clips of inside the car. Stock 5.0L motor with minor bolt-ons, stock
400hp Stroker Fox-Body vs SVT Cobra Mustang
features a Fox-Body Mustang
LX with a 342 Stroker, Canfield Heads, Custom Grind Cam and full bolt-ons,
4.10 gears, World Class T5... trying a wicked 2004 SVT Cobra Terminator Mustang with Pulley, Tune, Exhaust and other bolt-ons...
Produced by John (Trae) King @ nedaCFilms with background music produced by
Burn the Earth. Check out more music by these local "Mid-Atlantic, Metal
Thrashing, Bone Crunching Rockers"... their Raw Grassroots style heavy
tunes are available at http://www.myspace.com/burntheearth2
Tims 1990 mustang 5.0 donuts all out !!!
90 lx 5.0 flowmaster 50 series edelbrock aluminum heads 303b roller cam 1.7
ratio roller rockers polished cobra intake 65mm throttlebody 75mm mass air
meter bbk headers.spec stage 2 clutch aluminun drive shaft 3.73 rear
gears.moser forged steel axels.agr 15.1 ratio steering rack powerslotfront
rotors hawk pads. 93 cobra wheels hypertechchip# 689161
IRS Install in a fox-body Mustang
This video is about the installation of a 2003 SVT Cobra's independent rear
suspension into a 1991 Mustang LX. Muscle Mustangs & Fast Fords magazine
followed the process and wrote up a tech article for their June 2013
issue...titled, "Declaration of Independence".