These AEM Power water/methanol injection kits allow you to increase Boost pressure and advance timing without having to run higher octane fuel. They include either a 1-gallon or 5-gallon reservoir with a fluid level sensor already installed. Also included is AEM Power's Boost Safe output; this allows you to retard timing or reduce Boost if the systems run out of fluid or detect an error. Once installed, the AEM water/methanol injection kits use a Boost-dependent, variable-flow, progressive controller to determine the amount of water/methanol mixture to feed into the inlet stream from the reservoir. Adjustments can be made with the three included jets, resulting in significant horsepower gains. http://www.summitracing.com/redirect?banner=SocialYT1029
MSD - Understanding Ignition Timing
Understand and set ignition timing on your engine.
http://www.summitracing.com/redirect?banner=SocialYT681
Increasing Performance with an Oil Change
Anything that gives you a few more horsepower is worth considering so why not consider lubrication? Horse Power TV changes the lubricant on its 2000 Camaro to Royal Purple and examines the differences in performance.
http://www.summitracing.com/redirect?banner=SocialYT836
AEM Power Tru-Boost Gauge Type Controller Kits 4 of 4
These AEM Power TRU-Boost gauge-type controller kits feature an electronic Boost controller that combines the simplicity of a manual Boost controller with the added ease of adjusting Boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more Boost, press the button on the right of the gauge face, and if you want less Boost, press the button on the left of the gauge face. It's that simple, and it works!
http://www.summitracing.com/redirect?banner=SocialYT1028
Your Ultimate Power Tool - SummitRacing.com
Millions of Parts, Fast Shipping, Expert Advice and Savings Central! , Your Ultimate http://www.summitracing.com/redirect?banner=SocialYT1036 Power Tool!
Installing The Snow Performance Water/Methanol Injection Kit
We install and Dyno test a Snow Performance Muscle Car Water/Methanol injection kit on PHR's Project Nova, with the help of Outlaw Motorsports. See how well it works on a 10.5:1 compression naturally aspirated 400ci street engine!
AEM Meth Kit testing (loud pump)
running 1 gallon of meth through the system to clear out any debris before installation of the nozzle.
2nd half of video is on digital cam instead of camcorder so it is shitter
pump is pretty loud eh?
AEM Water/Methanol Failsafe Saves 400HP engine!
The AEM Water/Methanol Failsafe Device is used to protect an EVO's engine at full Boost on the Dyno when the water is shut off at over 390HP! The failsafe sees the difference in flow and goes into failsafe mode, dropping the Boost resulting in the car making "only" about 319HP to the wheels and saving the engine in the blink of an eye.
TruckU Part 1
Painless Performance Striker ColdShot Water/Methanol Injection System for Diesel. THIS KIT IS A PAINLESS DESIGN GUARANTEED TO FIT YOUR turbo DIESEL VEHICLE, NO OTHER KIT COMES CLOSE. The highest quality, most complete water/methanol injection system on the market. The on-board control monitor features an LED gauge displaying Boost pressure from 0 to 100 PSI in both analog and digital format and a 60 LED display of the programmable injection curve. The controller features a low-water level warning indicator and a dimming function for night and day brightness.
AEM Water/Methanol Injection Monitor - Gauge and Alarm Set Up
Learn how to set up the AEM Water/Methanol Injection Gauge and Alarms from the free AEM software. Set and customize gauge backlighting colors, needle intensity, and alarm display. The Injection Monitor is a breakthrough product that allows water/methanol users to monitor their entire flow curve, not just a single rate of flow, resulting in the best Water/Methanol Safety device on the market today.
AEM Water/Meth Injection Monitor/Failsafe Gauge
Here is the new water/meth injection gauge from AEM. This unit monitors the flow right before the nozzle, and has an alarm built in that not only activates visually, but can also trigger either secondary ECU maps or a Boost solenoid to reduce Boost.
It can be used with most water/meth injection systems, and requires minimal wiring to setup. With advanced logic it is able to detect both blockages and leakages, since the alarm system is set up to detect both low and overly high flow states. In conjunction with the failsafe mechanisms it allows water/meth injection to become a primary system.
The gauge also features variable gauge faces and scales, and is fully configurable with a USB cable. It also datalogs continuously and does not require an external data logger.
Visit us at newmiata.com for more details and pictures.
