Headlight Lens Restore using Toothpaste!
CGHQ Website: http://www.classicgamershq.com
Headlight lens restoration using regular toothpaste is real. It doesn't
take much effort, but the type or brand of toothpaste does make a
difference. Watch to see the results i came up with.
6 Peoples Reactions to the CRAZY 900hp 3Dx Evo
We had a blast giving people rides in the Evo, even had a guest driver when
we gave Miss Thai Thai a ride after her photo shoot! See what people
thought about the car, caught a lot of people off guard.
TEXAS STREETS & TX2K13 Release now and shipping! http://www.1320video.com
How To Install an HID Headlight Kit -EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
Please watch the Re: video before commenting:
I really enjoyed making this video and I LOVE driving my Element at night
now. This video is a step by step process of how to install one of these
kits. I've put in some what I hope are helpful hints along the way to make
the job easier for you. Here are the links mentioned in the video
including the one for the kit that I used. Remember be sure to check your
local laws concerning installing a kit like this before you commit just to
be sure you'd be in compliance.
8000K HID kit used in the video: http://www.motorfiend.com/8000K-HID-Kits/
Adjusting Headlights video: http://www.youtube.com/watch?v=yQ3OZnzR1Zc
Automatic Center Punch:
Universal drill bit:
Universal drill bit #2:
Discussion about this video:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.
Xenon vs. Halogen
http://www.MyHellaLights.com The advantages of Xenon lighting vs. Halogen
How To Clean Civic Type R Headlights with Toothpaste
We show you how to clean the misty haze layer that can appear on your
plastic headlight lenses over time making them look dull and transform them
into new shiny headlights!
All you need is toothpaste and a cloth!
Click here and SUBSCRIBE for more videos like this!
LIKE our CTR EP3 Facebook Page:
LIKE our TechTuners Facebook Page:
Civic Type R Oil Change Tutorial
Remove & Paint Civic Type R Rocker Cover
How To Replace Civic Side Lights (Facelift EP EP3 2004 - 2005)
Heko Wind Deflector Civic Type R EP3 - Fitting Tutorial
Watch our VTEC Compilation:
Red JDM Civic Type R Floor Mats
Plastidip Taillight Tint Stencil Diy
Here are the answers to most of your questions....
1. Will it come off?
No it's not permanent but YES it is resilient. I had it on my lights for
months with out it getting scratched or peeling.
2. Is this regular or smoke Plastidip
It is regular. I do say this in the video, however I should have put it in
the description. Sorry for the confusion.
3. Is that Forza Music? What kind of car is that?
Yes it is! :) Makes for great ambient music. Also, it's a BMW 335xi. It's
my winter car. (thus the whole "it's cold right now" in the video)
4. Yes it IS illegal.
At least where I live. HOWEVER, no I didn't get pulled over once for it. I
got pulled over for speeding and the cop didn't even mention it. I really
think it just depends on the cop that is behind you and how he feels about
5. isn't it too dark? Aren't you worried about people not being able to see
your lights when you brake? etc.
No, in the video they might look KIND OF dim, but in person the light
output was barely changed. HOWEVER, that doesn't mean that it wont be on
your car. It depends on what kind of bulbs you have, HOW MANY COATS YOU
DID, and just in general how nice your lights are. Either way, it was not
an issue with me and not once did I get the impression that someone
couldn't see them. Plastidip IS very transparent if you do a few light
coats... you literally JUST watched proof that it is... lol
6. Why didn't you use film? or why didn't you use "night shade"?
First off, I didn't use night shade because until I read these comments I
hadn't ever heard of it.
Second, I didn't use film because the other sets of film that i've used
either didn't fit right, were a pain to take off, peeled up on the edges,
and were much more expensive than this DIY.
7. Why did you use masking tape instead of electrical tape, duct tape etc.
Because masking tape leaves ZERO residue. Duct tape and electrical tape can
both leave lots of residue. As I stated in the Video though, you can always
use flexible nylon/ straight line tape I believe for round edges.
8. Why didn't you just mask everything BUT the clear part then blah blah
really?... mask the part that I WANTED to paint?....
A. that would have taken forever
B. it would have used WAY more paint.
C. I would NEVER mask everything then use a razor on my tail lights....
thats just silly.
9. What was the point of the "press and seal"
The point of that was to show you another way that I had seen it done. I
then went on to say how I do not reccomend it cause you would get garbage
10. How many coats did you do?
If you watch the video I technically did 1 coat. it was a thick coat but I
did that because I knew I wasn't going to be laying it on to the point that
it was not transparent. you will have to be the judge on how many
coats/passes you do. Good news is, if you put on too much, or too little,
no worries! It's plastidip and it'll come right off! Than do it again!
11. Could you do this on your headlights?
I guess you could... although I could see that being a much easier way to
get pulled over. But really, it's worth a try. Worst case is you tell the
cop that pulls you over that you didn't realize it was illegal and ask him
if he'll give you the opportunity to peel it off on the spot.
12. Do you feel the edges with your hands?
You can if you rub your hand over it, but it's very faint. And no it did
not make it peel.
Really at the end of the day, Like I said in the video. Its not everyones
style. It's non permanent, it's SUPER cheap, and most of all THIS MAINLY
WAS A TEST AND A GUIDE ON HOW TO STENCIL YOUR TAIL LIGHTS not REALLY how to
plastidip your lights. So use whatever product you want. I just used
regular dip cause I had some lying around from doing window trim.
And like most mods to your car, you're doing this at your own discretion,
so be safe and use common sense. if you "black out" your lights, you may be
running the risk of accident. So only go to the point that they are still
Thanks for all the thumbs up, and all the kind comments. Hopefully this
answered most of your questions.
Schwenktüre Schiebetüre Golf 2 II 3 III crazy tuning 16V G60 limited sliding parallel door 2
Das gibts nur einmal? Hier sehen Sie eine Schwenktüre für einen Golf 2
mit Tüv Papieren, wurde gleichzeitig mit einem Rollstuhleinbau versehen.
passt vielleicht auch in Golf 3 Bei Interesse senden Sie bitte ein mail,
rallye1963 at yahoo punkt com
this is only 1 time available? here you see special sliding parallel door
from Golf Mk 2, with technical registration paper. This car was assembled
originally at same time with wheel chair automatic load and unload
function, see video NR 2, if you interrest, just email me pls. rallye1963
at yahoo dot com