Some pictures of my sas and buildup with a few poser shots at the end.
1990 Toyota 4Runner-22RE-5 speed-TG 3" front/4" rear-35" BFG M/T-4.88's-rear LSD-front TruTrac-MC Rear Bumper-TG DOM Sliders-TG
Parts were from either Marlin Crawler or Trail Gear
3 Link SAS Toyota 4x4
My build pictures. I have missed placed a lot of them so the pictures jump
around. Trail Gear Three Link kit with Fox Air Shocks. 85 front axle with
5.29 gears, chromoly Dirty 30 axles, chromoly hub gears, Lock Rite locker,
Axle gussets and truss. Dual transfer case with twin stick. Trail Gear 5''
Classic rear lift. Rear axle has disk brakes and Detroit locker. Maxxis
Creepie Crawler 37x12.50x16. This is my daily driver. Just needs bumbers,
rock sliders, and some body work.
Song by: AC/DC (It's a Long Way to the Top).
85 4runner on rocky mountain loop
Shakedown run in my 85 4Runner after a year and a half build. Specs are
22R, W 56, Marlin Ultimate Dual Crawlers clocked 10 degrees, Lock Right in
the rear and open in the front, geared 4.10. Lift comes from Superlift in
the front with stock rears with extended shackles, add a leaf and 2 inch
blocks from Auto Zone (Which I don't recommend.) Armor comes from Trail
gear for the front axle and All Pro for the sliders and a heavily massaged
Triple X cross member for the clocked cases. The axle wrap you hear my
camera man talking about started to crush the lift blocks down around the
spring perch causing the pinion to rotate up. If you look closely you can
see it. I later did one of the harder lines at Kodak Rock before the
damage was noticed. 63 inch Chevy's are in my near future.....
1990 Toyota 2WD SAS Build Lifted Yota Toy 4X4
The build process of my Toyota. Started out as a junky 1990 2WD and i did a
4wd SAS on it. Rebuilt the motor and refinished the interior.
Here are some specs:
Front Trail Gear 3" springs
Trail Gear Hanger Kit
Fully rebuilt front axle
Rear has F150 leafs
Bilstein shocks all around
33" Cooper STT Tires
Rebuilt with Engn Bldr street rv head
Bigger valves and ported
Engn Bldr 261C cam
Doug Thorley Tri Y Header
2.25" Exhaust with magnaflow
94 4Runner: Solid Front Axle + Crossover Steering Setup! & Poor Beastie :( (08/08/11)
Well, I got the motor yanked out first thing, before I started recording...
I didnt have a good morning, and didnt want to be angry on the vlog, so i
waited till i calmed down a bit...
Then i got the front axle out from under Beastie, and slid under Beastie
2.0! Got it in, but it took a little longer than I had hoped.
By then, it was just too hot, so i had to take a break! As soon as the sun
went down, I started tearing the rear axle out. Its almost ready to go in.
I just have to pick up some u-bolts tomorrow and then build some custom
Though, most of tomorrow is going to be spent wrenching on my Mom's motor
home/camper van thing...
Thanks for Watching!
1994 Toyota Solid Axle 4Runner (04/09/12)
Well, you guys asked for it, so here it is!
1994 Toyota 4Runner body
1992 Toyota Ext Cab Pickup Frame (shortened & SAS'd)
1998 Toyota Tacoma 5VZ-FE
1988 Toyota 4Runner v6 Transmission
1985/84 Toyota Gear Driven T-Cases
Custom Armored Axles F/R
IFS Rear Axle W/ Disc Brake Swap
IFS Mod on Front Axle W/ Big Brake Swap
Ford F150 Rear Gas Tank Converted for Toyota Fuel Pump & Sender
Ford Shock Towers
Rear Springs Up Front (RUF)
Chevy Rear Springs
Custom Bumpers F/R (redoing Rear bumper though)
Warn 8274 Winch (needs a motor)
Whole bunch more, just watch the video!
Thanks for Watching! http://analog56x.com/forum
Turbo Supra 4Runner
Crawling in Moab, UT April 2009.
I was having trouble because I didn't have the rear locker wired up. Of
course it doesn't help having wet tires. Unfortunately my baby had to be
sold in order to purchase my FZJ80. Filmed and edited by user russtuff.
1987 TOYOTA 4RUNNER
260HP 7M-GTE Toyota Supra turbo motor
with 90,000 miles, (stock 22RE motor is 105HP), CT26 turbo w/upgraded 60-1 compressor wheel, Supra fuel
pump, GReddy adjustable blow off valve, 3" Monster Performance downpipe
with full 3 motor back Exhaust, solid
axle swap using a Toyota 8" axle and Marlin Crawlers front spring hanger,
Marlin Crawler 1.5 front wheel spacers, 4" All-Pro Off-Road extra length
front springs, 4" Alcan extra length rear springs, total lift equals about
8" with a Utah legal frame height of 26", R151F turbo transmission with 4.31 first gear ratio, 23
spline turbo transfer case with Marlin
4.7 gears installed, crawl ratio equals 99:1, (stock crawl ratio = 37:1),
Longfields, locked front and rear using Toyota's electric locker in the
rear from a 2000 4Runner and a Powertrax Lock-Right in the front, 4.88
cryogenically treated Yukon gears by Bobby Long, All-Pro Off-Road High
Steer, 35x12.50 BFG A/Ts on 15x8 black crawler wheels, custom front and
rear prerunner tube bumpers, Trail Gear rock sliders, Trail Gear 12"
balanced long spline front driveshaft, Sweeney built shock hoops, upgraded
to Land Cruiser vented rotors, Optima red top battery, upgraded 3 core
radiator, Pioneer deck with Alpine amplifier and 12" sub, Cobra CB radio,
Kenwood ham radio, factory clinometer/altimeter, rare door panel option,
power windows, door locks, and side mirrors.