2004 Mazdaspeed Miata Straight-Pipe Catback Exhaust
My 04 MSM with the following mods
FM Intake Kit
FM Springs
FM Sways
6000k HID
SW in-vent Boost Gauge 15psi/30Hg
16x7 BBS RK
Eagle F1 GS-D3
Hawk HPS on 4 corners
Removed Resonator
Removed Muffler
Topspeed Pro1 Exhaust 1.6L Miata
Sorry for the "Brostep" Gay Music,
TYPE THIS IN ON EBAY AND IT WILL BE THE FIRST CHOICE....
"topspeed pro Exhaust miata"
--------------------------------------------------------------------------------------
Start up, Drive away (5K rpm) and Drive toward (6.5K rpms)
Dope Soundtrack included....
Skrillex - Died This Way
This is a Stock Miata except for Airbox and Exhaust....obviously.
eBay Exhaust purchased for about $200
-2.25" pipe to the stock headers was about $80
-High Flow cat from Meinieke was about $100
Highly recommend this system, great price and great sound enjoy.
2004 Mazda Speed Miata
William Meek presents this 2004 Mazda Speed Miata at Signature VW Hyundai of Murfreeboro. See this vehicle online at http://www.vwhyundai.com or call William at (615) 898-0700
Installing a Racing Beat exhaust
Thanks to the magic of film editing, this is the several hour process of installing a Racing Beat header and Exhaust (with a Mazda Motorsports catalytic converter delete pipe) on SportsCar magazine's Project Miata, which races in SCCA's ITA class.
(Special thanks to Kevin MacLeod for the royalty free "Olde Timey" song.)
Mazdaspeed miata 17psi vs 6.0 LS2 GTO 440 hp
If you want to run water meth on your Mazdaspeed mx5 I recommend a 3 gallon per hour nozzle & 14.5 psi of Boost with the stock injectors & I disconnect my throttle position sensor to give more fuel a lower rpm's when I know I will be hitting the gas & reconnect the TP sensor when I am just cruising around. With TP sensor connected I go full throttle only above 5000 rpm's where it switches between open & closed loop at anything above 10.5 psi. I do not run 17 psi all the time just did a few times. Most of the time I have it set to 14.5 psi. I feel very safe at 14.5 psi with water/meth injection. & on curvy mountain roads sometimes I will shut the water/meth off & turn the Boost down to 10 or 10.5 psi. Mazdaspeed mx5 1.8L turbo, 2450lbs, FM intake, FM downpipe, no muffler, Devils Own progressive water/meth kit, Denso 321cc injectors, 17psi VS 6.0L LS2 Pontiac GTO cold air intake & Exhaust pipes 440hp.
Borla dual exhaust on miata
Borla dual Exhaust system, sport version. This is my '91 miata with Racing Beat high flow intake with Jackson Racing performance headers and high flow cat.
Miata Exhaust: Stock vs. Jackson Racing Part 2
Stock 95 Exhaust compare with Jackson Racing Cat-Back Exhaust.
The car is pretty much stock, I have a K&N filter to make air flows easier.
I bought this Exhaust used for $75. Yes you heard it right. $75 :).
Took me about 1 hour for installation, then I found out the gaskets leak like crazy. Some of the bolts are rusted. So I just took it to a muffler shop and have them to do the job.
I'm happy with the sound, but not a fan of the big Exhaust tip.
Click Part 1 for video of Stock Exhaust.
Check out my page for more pictures and reviews.
http://www.cardomain.com/ride/3215662
Miata exhaust comparison Racing Beat - Fujitsubo RM-01A
www.949Racing.com - Racing Beat # 56451 Power Pulse Muffler
Racing Beat # 56437 Power Pulse connecting pipe (resonated)
29.6 lbs - Fujitsubo RM-01A cat back Exhaust # FJ-160-42412 - 17.0 lbs - Car: stock 95 R package Miata, stock cat (shop beater)
Corksport Miata Exhaust
New "drift" Exhaust by Corksport for the NA miata.
Apologies for the bad camera which doesn't capture all of the tones
