More Videos...

Belt and Pulley Basics - EricTheCarGuy
Belt and Pulley Basics - EricTheCarGuy http://www.ericthecarguy.com/ http://www.bbbind.com/ Once again I team up with BBB Industries to bring you this video on what to look for with your belts and pulleys. So if you have a noisy belt you might want to perform some of these checks first as it may not be the belts fault. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Replace a Front Wheel Drive Axle - EricTheCarGuy
How To Replace a Front Wheel Drive Axle - EricTheCarGuy http://www.ericthecarguy.com/ There were a lot of requests for this and I finally found the opportunity to shoot this video so here it is, enjoy. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Removing Brake Rotor Screws That Won't Come Out - EricTheCarGuy
Removing Brake Rotor Screws That Won't Come Out - EricTheCarGuy I think the title covers this one. Honda's are famous for this so I made this little video to help you should you be in this situation. Wear your safety glasses when you do this or whenever you hit things, getting crap in your eye sucks, trust me. Impact drivers can be found at your local tool supplier. If you don't have a hammer I don't know what to tell you. This doesn't seem to require a long explanation so I'm going to stop typing now. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Diagnosing Alternator Problems - EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/ I got together with my friends from BBB Industries on this one, we managed to put together a pretty comprehensive step by step on what to do if you suspect an alternator issue. Take the time to go through these steps the next time you suspect a bad alternator and you just may save yourself a trip to the auto parts store. http://www.bbbind.com/ --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Pt. 2 of 2: Timing Belt Service 7th Gen Honda Civic
CGHQ Website: http://www.classicgamershq.com Subscribe: http://www.youtube.com/subscription_center?src_vid=cTUDMqGVZTQ&add_user=big2000dave&annotation_id=annotation_456191&feature=iv Facebook: https://www.facebook.com/pages/Classic-Gamers-HQ/206873449382847 Twitter: http://twitter.com/#!/classicgamershq Part 2: This is a fully detailed timing belt service for a 2001-2005 Honda Civic 7th generation vehicle. We replace the timing belt, a/c and alternator belt, power steering pump belt, water pump, auto tensioner, and crank shaft seal. This is a step by step procedure to do this service successfully with a bit of time and patience. Be sure to subscribe. Thanks! PART 1: http://www.youtube.com/watch?v=zUjHS_gmmMQ Also check out the aftermath, motor mount repair video: http://www.youtube.com/watch?v=G0NmnGS6V1k

Craftsman vs. Snap-on
Just my opinion on some of the tools that I use everyday.

Belt tension trick
How to know if your belt is tight enough to not squeak, but not kill bearings either. Belt tension trick

Serpentine Belt Tensioner Removal 2
Saturn Tensioner Removal

Quick Tip-Throttle Cleaning - EricTheCarGuy
This one goes out to BowlingBallOut who posted a question about a sticky throttle on his Saturn. It was a great question so I decided to make this video in response to it. There are many different configurations of throttle assemblies but for the most part if you have a throttle that is sticking you might be able to fix it using the procedures in this video. I am aware you may not able to purchase spray throttle cleaner in some states now but I'm sure they have some alternative available at your local parts store. Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy BowlingBalOutl's chanel http://www.youtube.com/user/bowlingballout Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Replacing a Distributor, Acura Integra - EricTheCarGuy
Replacing a Distributor, Acura Integra - EricTheCarGuy Well I think the title will sum this one up. Yes, I did loan my car to my brother the other day only to get it back with a bad distributor, luckily I had one in a box, not the correct one but one that worked. This also covers firing order and a few other tips should you have to replace the igniter or coil. In my opinion the only things you should automatically replace a distributor on a Honda or Acura for are the bearing going bad like in this video or oil leaking inside the assembly. I don't think they should ever be automatically replaced for a no start. I also highly recommend using Honda ignition parts, if not you may be sorry. There will be a "sequel" to this covering setting the ignition timing, click the link below. http://www.youtube.com/watch?v=sGzxCCaxDjI --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- As always, stay dirty ETCG Disclaimer: Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

GATES: Diagnosing Belt Noise - The Spray Bottle Test
The root cause of V-ribbed belt noise is often difficult to determine. This video will help you diagnose engine belt noise using a simple yet effective spray bottle test.

Does Stop Leak Work? - EricTheCarGuy
Does Stop Leak Work? - EricTheCarGuy http://www.ericthecarguy.com/ As technicians we all have opinions based on our experiences and sometimes the experiences of others, stop leak seems to be one of those things. In my experience it really hasn't done much for me and I haven't seen it perform any miracles but that's not to say that it hasn't at one time or another. I welcome your responses on this topic and look forward to hearing your opinions just be nice. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG

Serpentine Belt Tensioner Removal (updated)
Saturn s-series Serpentine Belt Tensioner Removal

How To Remove Wheel Locks Without a Key - EricTheCarGuy
How To Remove Wheel Locks Without a Key - EricTheCarGuy As I state in the video DONOT use this information for illegal purposes, it is intended to HELP you if you happen to loose your wheel lock key. As with most things that I do with cars this didn't go exactly as planned, in fact there is a significant amount of time between me getting the socket hammered onto the wheel lock and when it actually broke loose, I took a break to work on other things. I also said in the video that they make a special socket for removing wheel locks that makes this a lot easier, do a search for this and you will probably find a set of them. If you can't find one of these sockets then this might be an option for you to try. The best thing is to try not to loose the lock key in the first place but I realize that this may not always be possible so I made this video for you. Stop by and see me at EricTheCarGuy.com anytime and post video or text responses at will. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

What is VTEC and How Does it Work? - EricTheCarGuy
What is VTEC and How Does it Work? - EricTheCarGuy I've been editing some full length video this week and I came across this bit from a car I worked on last spring. The animations are courtesy Honda Motor Company, thanks guys. I think the title is self explanatory and I hope the video makes it a little clearer for those who are curious about this system and how it works. I've had a couple of requests for this and I hope this answers those questions. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG