The True Sound of VTEC
I've been watching around many videos and none could actually "present" the
sound of the VTEC. So I decided to record and show what the sound really is
This is in Malaysia in my friend's B16B EK9, four guys in the car and
messing shit up on the way to KLIA.
Downshifted 2 gears and flooring it until VTEC engages, where the best part
of this clip is.
HONDA V-Tec Operation
HONDA V-Tec Operation
Get the book here: https://www.createspace.com/4321251
Describes the operation of the HONDA V-Tec variable valve timing system.
Like never seen before, this animation goes into details on the mechanical
principle of the V-Tec system. The Honda V-Tec system is a dual setting
variable valve timing system. It is meant to give high efficiency and low
power at lower RPM and high power and low efficiency at higher RPMs. There
have been a few incarnations of V-Tec, which came out in the late 80's, but
their principle is the same. See it all here with high quality visual
Amazon Printed-Books & Kindle:
Google Play Android APPs:
Amazon Video DVDs:
Barnes & Noble Nook:
Apple iTunes iPad:
Honda Civic EJ8 Custom Build Widebody Flits
Since the majority keeps nagging about the lambodoors, neon and stating the
easy to post 'ricer', I thought it's time to upload an update and yes, the
lambodoors and neon are trashed ;).
But then again there's something new to complain about, since it's not the
OEM version you all like to see! Hmmm, that's something to think about....
complains about modified cars and yet, your youtube search stopped by
looking at my video :P :)
Back to the content of the video, it's a complete custom build wide body
which took me almost a year to finish. Rims are from Racinghart. Front 9,5J
With 225*35*18. Rear are 10J With Falken 245*35*18 Curious of the replies,
i'll be waiting :)
My Honda Civic D16 Turbo
D16Z6 turbo with GT3076R @0,48 bar
2011 with more power :D
my new Setup 2012 with E85: http://youtu.be/erLiJoWLSwg /
Honda Civic EK3 H22A
Latest movie of this car! http://www.youtube.com/watch?v=_il00z_mk00
see photostory of building this project here
it looks much different now
D15Z6 Mini-e ITB
Engine is sold.
Project was done for the tech stuff anyway and to prove you can drive ITB's
It's slow? Unfortunately parts don't come walking in the door. Feel free to
donate a nice fat cheque for my new project though.
New project on http://www.k-series.nl.
* Engine type: D15Z6 VTEC-E
* Displacement: 1,493 cc (91.1 cu in)
* Compression: 9.6:1
* Bore and Stroke: 75 mm × 84.5 mm
* Valvetrain: D16Z6
* Camshaft: D16Z6
* Camgear: Skunk2 Tuner
* Pistons: stock
* Connecting rods: stock
* Crankshaft: stock
* Transmission: S20 - 40mm Bearing with D16A9 3th+4th Gear
* Clutch: F1 Racing 6-Puck
* Flywheel: Fidanza 7lb
- Technical stuff -
Ignition Map Lowcam:
Honda Accord VTEC Solenoid Gaskets Replacement
In this video I show you how to replace both VTEC solenoid valve gaskets
(valve to cylinder head and solenoid to valve) on 1994-1997 Accords.
This is a common cause of oil leaks on the upper passenger side of the
engine next to the distributor shaft seal, distributor o ring, and valve
It seems the same engineers who buried the Accords fuel filter also decided
to make the VTEC solenoid valve difficult to remove as well. One of the
bolts for the valve is buried so deep you have to partially drain the
cooling system and use a u-joint to get it out.
I take your through the process step by step from removal of all the parts
to re installation.
This video ran a bit longer than I wanted it to but considering how
deceptively easy this job looks at first glance (until you can't get that
one remaining hidden bolt on the valve off to remove it) I decided to leave
in as much detail as possible.
You will need to add new coolant and bleed the cooling system to avoid
engine damage after you're done. If you need that info here is the link to
my cooling system bleeding video.
Honda part numbers used in the video:
Solenoid to valve gasket: 36172-P0A-005
VTEC valve to cylinder head gasket: 15825-P0A-015
VTEC oil pressure switch o-ring: 91319-PR3-003
Thermostat housing to intake gasket: 91312-P0A-000
Thermostat housing to connecting pipe o-ring: 91314-PH7-003
These part numbers should work on all 1994-1997 Accords with VTEC but as
always check with your dealer to confirm these part numbers will work with
Intro and outro music by Kevin Macleod (Incompetech.com).
Honda Civic EJ/EK Pic Compilation
Compilation of clean EJ/EK Civics
1. (Drum 'n' Bass) HypnOpaediC - Precursor
2. Black Sun Empire - Dark Girl (Psycho Pictures)