This old Renault was heading for the crusher before we got the chance to wreck it first. Then the drive shaft snapped so there was only 1 thing left to do! It takes abit of doing but we got there in the end. Serial Complainers please note: The car isn't stolen,we don't leave any mess and clear everything up behind us so go rattle your gums some place else.
70cc Airsal vastloper\ puch blown engine
ead this before comment please
lees dit voor reactie te geven a.u.b
please don`t comment at all if you do not know exactly were you talking
a.u.b niet reageren als je niet precies weet waar je het over hebt.!
krankshaft cilinder and bearins where worn.
all remaining parts are used again. still doing their job.
trust me if you say I could build some good stuff out if that .
you only get some scrap alu.
onze excuses voor het ge kk niet op letten a.u.b
thumbs up graag want dit is een blok zo gaar dat het niks meer waard is dus
wrom dit er niet mee doen.
Oude 70 cilinder helemaal verkracht en vastgetrokken
Killing a Volvo in 30 seconds
Vi tröttnade på bilen och bestämde oss att avliva den så snällt och
snabbt vi bara kunde. Metoden var 1 kg blästersand, 1 liter förtunning
och bromsvätska i motorn. Enjoy
Border Bash 2008 Engine Blow out with Mk2 Golf
VW Border Bash 2008 Engine Blow out on a Mk2 Golf... With the car running
on little bit of Vegetable oil, and no motor oil in the car, here is the
Cars Engine Blow. It Stutters 1/3 of the way through, but starts up running
good after a few seconds. The Time from beginning to end was 2m49s, but
didnt get all the video taped, sorry...
Engine Blow Up
Ford Granada vs. VW Polo Which engine lasts longest with no oil and a brick
on the accelerator pedal?
pulsar engine blow up
We run this motor with no oil or water in an atempt to finally blow this
motor up.Previosly we ran heaps of NOS with a 60LB bottle see Nitrous Pulsar
engine blows up part 2
this car was a junk yard car. the engine was about the only thing that
worked on it and the car was going to be crushed, no one wanted to buy the
engine or anything else so we blew it up just days from being a sardine
Engine Blow up at school
This is what happens when you don't tighten the cam shaft bolts to specs.
We took the engine apart and all of the valves needed to be replaced
because they were bent. The top of the pistons all had the indentation from
the Exhaust and intake valves.
6 Peoples Reactions to the CRAZY 900hp 3Dx Evo
We had a blast giving people rides in the Evo, even had a guest driver when
we gave Miss Thai Thai a ride after her photo shoot! See what people
thought about the car, caught a lot of people off guard.
TEXAS STREETS & TX2K13 Release now and shipping! http://www.1320video.com
Engine explosion contest- Engine blows up - no oil or coolant- motor explodes minnesota
Saw this at the Early Iron car show at the International Falls Bass
tournament Aug. 28, 2010 in International Falls, Minnesota. In a 50/50
money-raising contest, spectators guessed how long it would take for the
engine to blow-up in this mini-van with NO OIL or coolant with the winning
time getting 1/2 the money raised.
At about 1.5 minutes, the engine started threw out red hot connecting
rods and wrist pins onto the trailer below the van, but it surprisingly
continued to run! I think the final time until complete engine melt-down
was 2mins 33 seconds . Sounded much worst than my phone recorded. You could
literally hear the pistons grinding against cylinder walls before it
seized. All in all, it was all good fun and the money raised from this
"engine explosion contest" went to a good cause.
Lots of people posting below that this old van should have been given to
someone less fortunate, but it was pulled from a junkyard and likely on way
to crusher. Definitely not safe for the road, but thoughts are in right
How an engine works - comprehensive tutorial animation featuring Toyota engine technologies
Animation I created for Toyota that gives an overview of the components of
an engine, how an engine works and some of Toyota's valve, intake and Exhaust technologies. I wrote, directed
and storyboarded the video. It was for training purposes only.
See other videos at: