2008 Kawasaki Ninja 250R with Yoshimura full Carbon Fiber Exhaust, jetted with DynoJet kit, and Intake Snorkel removed. *DJ100 Main Jets, Eclip on second pos, with one washer and spare eclip on each needle, mix screws each 2.5 turns out* Tuned a little rich, but runs excellent.
**** By the way, don't yell at me for revving a cold bike... becuase It WAS NOT cold in the video, I had just gotten back from an hour long ride. :)
Kawasaki Ninja 250r comparisons.
Met up with some fellow Kawi Ninja 250r riders and decided to make quick video. I really need a better video camera.. hope to get a GoPro later on!
*** THESE BIKES ARE ALL SOLD TO THEIR NEW OWNERS, the original riders in the video have moved on to other bikes ***
09 Black Ninja:
- Hotbodies double bubble wind screen
- MPG Growler Exhaust
- 140 rear tire
- Targa fender eliminator
- LED lighting
- Solo seat cowl
08 Green Ninja:
- Bone stock with just a DIY rear fender shave.
08 Blue/White Ninja:
- Akrapovic Exhaust
- 55 watt 6k hids
- Intuitive frame sliders
- EBC pads f/r
- Raised needles
- Woodcraft clip-ons
- Woodcraft rear-sets
- Custom vinyl
- Homelink gps mount
- Flushmount turn signals
- B2 Industries fender eliminator
- Integrated rear tail light
- Solo seat cowl
suzuki gsx-r 600 yoshimura exhaust baffle out r55 slip on carbon fiber tip
i took the baffle out and lost the allen screw keeping it in, down in the tip of the Exhaust... i didnt have a magnet so i had to take the Exhaust off real quick to get it back out... sounds much better with the baffle out... sorry if theres any distortion in the mic... i took it for a quick ride around the community to see how far away you could hear it from... anyways thanks
dont forget to rate or comment! :-)
99 Tacoma 3.4V6 Flowmaster 40 series
1999 Tacoma, 3.4V6, 4WD, Flowmaster 40 series muffler, stock piping. Truck was already warm on start. (Don't rev a cold engine...) 209,000 miles!
Ninja 250R Best mods [HD] [Kawasaki-Bikers.gr]
A video i created by searching several sites all around the world! The best Kawasaki ninja's 250R mods. From custom paint-jobs to gauges! Subscribe for more! Enjoy :-) . Check the second part as well
Mine is the last one ;D
2008 Ninja 250 with Remus Pipe
I had bought this pipe for another bike a few years ago.I had it professionally tuned for the 250 motor and then welded back together. Than I gave it a welder to fabricate the slip on fitting and weld it all back together.
The small stock header looked funny going into a full size can so I made the stock shield work to cover the connection.