HEI MoPar 318-360 V8 Engine from Top Street Performance ID13241
http://enjoythedrive.com/ TSP HEI Distributors features everything you need
ignition wise under one cap. The one wire hookup leaves you with adjusting
your timing and you are done!The adjustable vacuum advance allows you dial
in the timing exactly where you need it. Fits perfect with most aftermarket
10 second 68 Firebird Sacramento Raceway 1987
This 68 Firebird was my first car purchased when I was 17 in 1977. The car
is currently undergoing a frame-off restoration.
At the time this video was taken in 1987 it was powered by a 455 Pontiac
The best ¼ mile performance was an ET of 10.87 and a MPH of 124.83 WITHOUT
the aid Nitrous oxide.
The heads are ported factory cast iron D-Ports cast# 48.
Crankshaft is factory 455
Rods are factory 73/74 455 Super-Duty
Camshaft is a Cam Dynamics solid flat-tappet with .618/.644" lift (1.65
rockers) 265/275 @.050 duration
Advertised duration is 312/322 int/exh
Pistons are Ross flat-tops yielding 12:1 compression ratio with the 69cc
Carburetion is 2 660cfm Holley center squirters mounted on a Doug
Nash/Warrior tunnel-ram manifold.
The differential is a Dana 60 with a 4.10 ratio gear set
Micamcorder-Eddy Tassone licenses new Monaro drag car at the Perth Motorplex 09.02.2011
Eddy Tassone and the team at Active Automotive licenses new Monaro drag car
at the Perth Motorplex 09.02.2011, test track hire day.
Powered by a naturally aspirated 488 cubed EFi tall deck RHS aluminium
blocked LS engine, the power up top comes from Mozez cylinder heads which
have been married to a stunning Marcella sheetmetal tunnel ram manifold. A
pair of Wilson EFi throttle bodies complete the power package providing
this monster engine with more than 4000cfm of air! Other specs include a
Callies crank, Dyer H-beam rods and forged Diamond pistons. EFi tuning is
done by Eddy Tassone.
It was a warm day in Perth with the track temp scorching to nearly 130 F,
and the track was between 2300-2600ft but Eddy Tassone's brand new GTO
managed a 9.6 on its half track licensing pass followed by a 8.74 on it's
very first full pass and then and 8.69 and 8.68 between 155 and 157mph.
On-board cabin footage and floor cam footage taken with Mi96HD Micamcorder
- http://www.micamcorder.com . Blackie suspension footage captured with SD
POV - http://www.racerecall.com
For more info on Active Automotive, check out
Mast Motorsports LS7 427 with 200 Shot of Nitrous
Mast Motorsport's Hand built LS7 427 with a Nitrous Express 200hp plate system. This engine
is going in a Formula Sand Buggy in Norway! Checkout Martin Michealson and
his crew's website www.insaneracing.no. This is an awesome form of racing
and their videos are truly amazing!
NASCAR Engine Build
Professional NASCAR engine builders from Hendricks Motorsports showed off
their stuff at AAPEX 2010! These two guys went from bare block to running
engine in less than 25 minutes! Click this link to subscribe to Motor Age!
2011 SEMA Show Video Coverage - Mast Motorsports V8TV
Mast Motorsports builds high performance GM LS based engines, cylinder
heads, engine controllers, camshafts, and more. We learned more about
the Mast program and their capabilities in engine building, Dyno tuning, and product