How Water/Methanol Injection Works & How It Makes Horsepower in Gas Engines
AEM Performance Electronics explains how Water/Methanol Injection works in gasoline engines, the benefits of Water/Methanol Injection and dispels some myths of using Water/Methanol. Water/Methanol works differently in diesel engines, so stay tuned for a video on how Water/Methanol Injection works in a diesel engine soon!
Installing The Snow Performance Water/Methanol Injection Kit
We install and Dyno test a Snow Performance Muscle Car Water/Methanol injection kit on PHR's Project Nova, with the help of Outlaw Motorsports. See how well it works on a 10.5:1 compression naturally aspirated 400ci street engine!
Water injection installed and operational
My 1993 rx7 has a fully operational preturbo water injection system installed! I have to install an inline fuse for the solenoid but it's amazing!
I'm running 15 psi until I install my 3 bar sensor.
7.3 water methanol injection
First use of my stage 3 water/meth. Early 99 gt38r, swamps injectors, tymar intake, 4" downpipe 5" back, built 4r100, no tuner or programmer
Water Injection System For Japanese Car
Homemade water injection kit..
Low cost..
Easy to install..
Avoid detonation..
Increase power..
Prevent carbonise..
Free polution..
Save Fuel up to 20%
Successfully tested in Mazda 323,Toyota,Proton and Produa....
300C SRT8 Supercharged + Methanol Spray
Please See Video Responses before you Comment!!!
(NO NITRIOUS. I made an error in the comments when I was shooting this video. NO NITRIOUS)
For those who don't believe that this SRT8 is supercharged, please look at the video responses and see for yourself
(HD) Texas_Ace Methanol Injection nozzle comparison review with slow-mo
Don't forget to Like, Fav, Subscribe. Then leave a comment letting me know how to improve my videos!
Please note that these are the old style Devils own nozzles. The new models are supposed to have a significantly better atomization although I have not been able to get my hands on them yet.
This is a video comparing a range of the more popular methanol injection nozzles. I have been asked many times what nozzles I prefer so I decided it was time to just run a test with all of the ones I have to see what was what.
The video explains most of this in detail, if there is anything I missed leave a comment! I read/reply to comments on my videos!
Final verdict of the nozzles is like this:
1st place: Coolingmist CM nozzles - Best atomization and good overall spray pattern. Nozzle body is just fittings though.
2nd place: Devils own nozzles - Marginally behind the coolingmist but still perfectly acceptable. Better 1 piece nozzle body.
3rd place: Becool (ebay) nozzles - To be fair this was a larger nozzle so it is not a direct comparison but it did seem to have the largest droplet size to my hands even taking that into account. Marginally behind the devils own. The wide spray patter is not for every situation either. They are the cheapest nozzles and for the price they are still a viable option.
4th place: AEM nozzles - These are in 4th place mainly because the only way to get them is to buy the AEM meth injection kit. NOT recommended. The nozzles by themselves are ok, wide spray angle like the becool but they do atomize pretty good. I would say on par with the devils own. The treads on the nozzle tip are strange though so it makes it hard to tap for these nozzles.
Overall, Coolingmist is what I would try to run but any of the nozzles will work just fine. The coolingmist nozzles by themselves are very pricy and honestly I don't think it is worth it to buy them at full price over a devils own nozzle. If buying a methanol kit though the CM nozzles are a big point in favor of coolingmist for sure since they come free with the kits.
Buying a separate nozzle after the fact, at full price, think I would just go with devils own nozzle.
Music is: Robo-Western by Kevin MacLeod
Water Methanol Injection
settings at 10 PSI (10%) full setting at 30 PSI (100%) for my RWD 87 Mazda Familia 323
Steam injection test on Saab 900 Internal combustion engine, not HHO or water car but Hypermiling
Steam injected into the manifold increases engine vacuum and torque, RPMs rise faster and the engine is de coked and cleaned internally, also the Exhaust gas vanishes? I am unable to explain why this happens, there are thousands of patents for steam injection systems yet I have never seen one on a car, why not? my fuel logs show a 14% increase in efficiency so far.
Any comments and suggestion are welcome to try and explain this phenomena.
Snow Performance Water Methanol Injection NASCAR Powered Cobra on Track
http://www.snowperformance.net Check out this video of a Cobra running Snow Performance water methanol injection ripping around the track. The car does have a NASCAR V8 power plant instead of the traditional Ford 5.0L engine.
