Blown 4.3 vortec
this is my 99 s10 blazer with a blown 4.3 vortec, getting a 350 swap
New 8000lb Winch
this is my new promark offroad 8000lb silverback recovery winch i just bought for the s10 blazer. Its a very nice winch
Here is a video of my 1999 S10 Blazer lifted with wheels and tires
Here is the missing part of the trimer mud bog
How to Set Up Your New Winch
A new winch is an awesome addition to a safe and competent four wheel drive weapon; ensure it is set up correctly with some timely advice from our friends at Superwinch.
The Intelligent Winch - 4X4
My name is Yair Bartal.
The Intelligent Winch is a new inovative winch invented and developed by me.
The system you can see in the film was built on the basis of my development (US Patent No. 6523806).
In the film we used the first prototype which has been created in order to prove the system's feasibility.
The film was shot from three diferent angles and was edited so that the vehicle and the winch are synchronized in order to demonstrate how the Intelligent Winch operates while changing the angle of the cable to account for the vehicle's movemennt (inclined on it's side, climbing on a boulder).
I intend to commercialize the Intelligent Winch and will be glad to recieve comments and proposals
check out my website: www.intelligentwinch.com
Going 4WD - The Bush Winch - Wheel Winch
The Bush Winch is a versatile piece of recovery equipment that relys on engine power. The kit comprises 2x spools, ropes, special wheel nuts and a carry bag. Optional extras for the kit are rope guides, ground anchor kit and a bridle rope.
WARN Molalla Mount
http://www.warn.com/fire_rescue/Molalla_Mount.shtml A video showing the WARN Moalla Mount in action with the 9.5cti portable winch. Designed for use with the WARN 9.5cti Multi-Mount Winch, this receiver allows you to pull from either side of your rescue vehicle using the weight of the vehicle to hold the mount in place. For use with vehicles with a minimum rear axle weight of 20,000 lbs. (9,072 kgs).