Backyard Corolla Frame Straightening
This video covers a attempt to straighten the frame on a wrecked Corolla. The method used is crude(eyeball only) and nobody should attempt this. The car is a hooptie anyway so it can't get much worse.
Oil Pan Drain Plug Leak Fix
Trying a over sized drain plug on a oil pan with messed up threads. It's now one week into this video and the new plug has not leaked. I have yet to do another oil change and will update the results after.
Strut bearing replacement
Just bought a spring compressor to do this job.
only special tool necessary here and pretty much the same method on all vehicles.
The diagnosis of bad strut bearings can be done trough several symptoms observation :
-while getting out of a curve difficulty for the steering to come back centered alone
-difficulties to turn the steering wheel while parked
-once all front end lifted, difficulty to turn manually the wheels both directions
-noises from the hood sides compartment while cruising or running on a bump
How To Replace a Front Wheel Drive Axle - EricTheCarGuy
How To Replace a Front Wheel Drive Axle - EricTheCarGuy
http://www.ericthecarguy.com/
There were a lot of requests for this and I finally found the opportunity to shoot this video so here it is, enjoy.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
How to Replace Drum Brake Shoes, 2001 Odyssey - EricTheCarGuy
How to Replace Drum Brake Shoes, 2001 Odyssey - EricTheCarGuy
http://www.ericthecarguy.com/
Well here it is kids another offering of my most popular subject to date, drum brake servicing. I know it's long but I've put a few extras in it for you that I hope you will like and will help you with other things besides just replacing the shoes. Feel free to comment on anything I might have missed, I know I misspoke on a couple of occasions in the video, forgive me as sometimes my mouth says different things than my brain is thinking.
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Replacing Rear Brake Drums and Pads on a 2000 Toyota Corolla
This is not really a tutorial since this is the ONLY time I've ever done this! So work on your brakes at your own risk.
I didn't really want to do the job myself at first. I wanted to pay someone else to do it, but the 2 or 3 people I took it to could never fix the squeak, so I had to take matters into my own hands -- or go crazy!
This video is a test of my Flip Cam, which is pretty good except for close-ups. I never added a voiceover or soundtrack to this video as I had intended. If I had waited until I had completed that, then I'd never get this video uploaded! So here you go! As good as it gets.
Additional pics are at http://photos.breakitandlearn.com/?page_id=199
On to the next project!
Rear Strut Removal And Installation
Tools needed proper fitting sockets and wrenches, Special Tool: Spring Compressor. This Im sure is not the best way to go about it, but it works if you don't have the proper tools like a bench and Vice (would have been nice). This is TRUE back yard mechanicin at its most down, dirty, and a lil ignorant.
I don't know why this shakes so much, it did not do this before I encoded it.. Sorry. GOOD LUCK!
Replacing Shock Absorbers
Find replacement shock absorbers for your car at Supercheap Auto. If we dont have them on the shelf we will be able to order them in within a few days.
Visit your nearest Supercheap Auto store or visit us online - www.supercheapauto.com.au or www.supercheapauto.co.nz
How to Replace Front Struts Part 1 - EricTheCarGuy
How to Replace Front Struts Part 1 - EricTheCarGuy
Well I'm finally getting this one up for you, sorry. It's been a busy week and I just haven't had the time to finish this one up but here it is in all its glory. Yes, it is something besides a Honda, in fact it's a 2000 Pontiac Grand Am. I do work on other cars just not that often since I know Honda's and Acura's so well. I hope to do a broad range of videos covering a wide range of subjects so keep watching, eventually I'll get to your request. For now enjoy this video and if you use the spring compressors I did in this video be careful, like I said in the video I've seen people get hurt doing this do take it seriously.
Part 2
http://www.youtube.com/watch?v=sPBAKzaxBeM
---
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
http://ericthecarguy.com/
Visit EricTheCarGuy Forum
http://www.ericthecarguy.com/forum/default.aspx
Visit my Facebook Page:
http://www.facebook.com/EricTheCarGuy
---
Stay dirty
ETCG
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
How to tell if your sway bar bushings are bad
Did my whole front end besides shocks and the sway bar bushings/end links, and still had a nasty clunk. Never thought to check the sway bar until I saw it almost dangling when my wheel was turned in the driveway.
Next week im doing all the shocks, and this thing is seriously gonna ride like new!
Monroe Quick Strut Review
http://www.tire-review-expert.com/monroe-quick-strut-review/ Super easy install. These fully assembled struts are ready to install straight out of the box. Toyota Camry, Dodge Caravan, Ford Explorer and many others are prime candidates for complete strut assembly's.
1983 Toyota Corolla 1.8: 10.100 @ 136.000
Manuel Betancourt, Engine: 2jz-ge (93 up supra non turbo), Turbos: greddy t88 Tires: mt 29x15.5street tire and goodgear 30x13 in track