LEDGlow's Million Color Mini Interior Light Kit features ultra-bright, surface mounted RGB LEDs making the included solid colors extremely vibrant and crisp giving your vehicle's interior a custom look everyone will envy. SMD RGB technology produces a more intense illumination by utilizing high powered 3 chip RGB LEDs, while also allowing for a lower profile tube and smoother operation.
For More Information Visit:
6pc. LED Flexible Motorcycle Light Kit Installation Video
This video covers the installation of an LEDGlow 6pc Flex Moto Kit on a
LEDGlow's 6pc LED Flexible Motorcycle Lights Kit is a six piece LED
flexible light strip kit designed to illuminate your bike while featuring
an assortment of outstanding abilities. The included wireless remote allows
you to easily power the unit on and off. Each kit includes two 5" 12 LED
strips, two 6" 15 LED strips, and two 12" 30 LED strips giving you a total
of 114 ultra bright wide angle LEDs. A one year warranty and free
technical support are included with every kit purchased.
Replacing Car Interior Lights with LED Lights
This video is a simple and short tutorial on how to put in an LED light
into a festoon socket in a car which is really easy... However, i as well
give a description of the Light. (Watts and Lumens given off & Volts and
Amps that are Needed)
Rat Rod vs Lamborghini Aventador! Roadkill Episode 5
On this episode of Roadkill, HOT ROD's David Freiburger and Mike Finnegan
spend 24 crazy hours with a 1930 Model A Rat Rod and a 2012 Lamborghini
Aventador to find out which wildly impractical, larger-than-life car
attracts the most attention.
Roadkill appears every fourth Friday on the new Motor Trend channel.
Subscribe now to make sure you're in on all the action!
Facebook - http://facebook.com/motortrendmag &
Twitter - http://twitter.com/motortrend
Google+ - https://plus.google.com/101867967859016552744/posts
Website - http://www.motortrend.com & http://www.hotrod.com
Tutorial - How to wire interior LED's to a toggle switch
Thanks for watching the other video guys! As i promised here is the actual
tutorial. I know it wasn't the best tutorial so ask me in the comments if
you have any questions. LED's are from LEDglow.com, the rest of the
supplies are from autozone.
PLEASE READ THROUGH THE COMMENTS BEFORE ASKING QUESTIONS.
LEDGlow Million Color Mini Setup
Link to product:
This is how I have my 6pc. Million color mini LED interior lights set up in
my car. I also show you how they look at night. Its a very good product, I
haven't had any problems with it so far and I've had them installed about 8
months (Installed Spring 2012)
How to Install Footwell Lighting that Fades with Dome Light in a 2006-current Honda Civic
Cost: Around $20-30 Difficulty: Intermediate Required Skills:
partial disassembly of a car's interior, and use of a soldering iron
Looking for the giant clock video?
UPDATE: According to various comments, this will work for the current
Honda Civic (or at least 2012 models) and will also work for the sedan.
Make sure you test the wires first, though, in case something is different.
If you're going to try it on these models, make sure you find out how to
remove the paneling--the process may have changed. Again, this video was
made specifically for the North American 8th generation Civic Coupe, which
covers model years 2006-2011. You will likely have to alter the procedure
in some way for all other models.
This is my first how-to video, so please bear that in mind when you watch
I've been wanting to install footwell lighting in my car (a 2009 Civic
Coupe) for a little while, and instead of just doing it, I decided that I
should record my progress and make a video of it for YouTube. Well, here
This modification wasn't nearly as difficult as it was time consuming. I
mention in the video that it takes 1-2 hours to complete, however this is
if you have access to all your materials at one time. I spread this out
over a few days and ended up spending much more time then I thought it
would take, just because of my start-and-stop schedule.
Basically, what makes these footwell lights unique is that they are tapped
from the dome light's power, so they will dim in and out with it. It took
me a very long time to find the information on the series of tubes that is
the Internet that showed where the dome light's wires were. I have to
thank the people at 8thcivic.com for contributing to a forum that
eventually gave me all the info I needed.
Some users have reported compatibility issues with the wire
taps/scotchlocks and the light strips. Ii is my recommendation to solder
wires directly to the strips, either using the solder pads or the wires
that may have come with your strips. However, for those who are
apprehensive of using a soldering iron (after all it can be dangerous), be
advised that you may have to use two sets of wire taps--one to make new
wires from the OEM wires, and another to tap your lights to these new
wires. Again, I always recommend soldering since it provides a better
connection, both electrically and mechanically. But if you want to avoid
soldering, just remember that you may need to find away around various
TO ADD A SEPARATE SET OF LIGHTS that stays on whenever the ignition is on,
use a fuse tap (which can be found at most auto parts stores) of the
correct size. If I remember correctly, this is for the ATM fuses. The
fuse tap does not need to be low-profile like the fuses are in the car.
Tap the radio fuse, or any other fuse that does not receive power when the
key is removed. Technically, the lights will be on when the key is in the
ACC or ON positions. The radio fuse was the only fuse that I found worked.
Use the smallest size fuse that came with the fuse tap for your new
lights. Then, wire the positive for these lights to the fuse tap and
ground them to something metal under the dashboard. I highlighted what I
used to make a ground at 12:38--I simply used a zip-tie and some bare wire,
looping the wire around the ring and securing it with the zip-tie.
DISCLAIMER: I will not be responsible for any damage that you cause to
your vehicle as a result of performing this modification, nor will I be
responsible for any voiding of warranties that may result from this
modification, and nor will I be responsible for any local laws that may be
broken by the use of footwell lighting. Since this footwell lighting only
operates when a door is opened (the dome light switch does not make the
footwell lights come on) or the car is being unlocked from the outside, I
doubt it would break any laws. However, if there are laws prohibiting
footwell lighting in your area, any fines or other consequences of breaking
the laws shall not be my responsibility.
YOU CAN NOW GET A 5 METER STRIP OF THESE LIGHTS FOR ABOUT $15 ON AMAZON!
Just search for LED Strip lights or Tape lights. You can also find them in
waterproof versions. If you want to do more projects with these lights,
look for them on Amazon. If you would like to add LED underglow, which I
explain how to do in another video, I would order a waterproof 5 meter
reel, and use a small portion for the footwell lights.
Besides the actual LEDs, most of the other materials required can be found
around the house. Remember to always remove the fuse to the circuit you'll
be working on, and be sure to check that the fuse you removed does indeed
protect your desired circuit.
Thanks for watching!
Trunk light video: http://www.youtube.com/watch?v=k_HXqIdIuMo
Test Drive The 2006 Mini Cooper S 6-spd Start Up, Exhaust, and Full Tour
In this video I give a short tour and test drive of a 2006 Mini Cooper S.
I take viewers on a close look through the interior and exterior of this
car while showing details, over viewing of features, and noting unique
styling cues to the vehicle itself. I show the car idling as well as take
it on a thorough test drive through the city and highway on various
surfaces. A thorough drive of this car designed to give others a greater
overall appreciation of the vehicle.
How to wire LED lights in a car to pulse to music
I am brielfy going over how to hook up LED lights in your car so that they
will flash to the bass of the music.
DO THIS AT YOUR OWN RISK!
LED lights car system subwoofer amp watts farad capacitor how to flash
pulse music sound bass audio "How-to (Conference Subject)" Kicker Bazooka
Installation of a 30" LED light bar from Bulldog. Mounted on a 2011 Ford F250 Super Duty
Like us on Facebook @: https://www.facebook.com/BlinkAutomotive
This is an installation of a 30" LED Lightbar from Bulldog Lighting. This
bar is extremely bright, and the best choice for offroading enthusiasts.
Please visit www.Bulldog-Lighting.com for more information and to order!
30" Bone Series LED Light Bar - 12000 Lumens - Outside dimensions of 31
1/16 x 3 1/8 x 3 1/8 -- 16 lbs -- Lumens:12000 Lumens - BD30
Product Specifications: Voltage Input: 9~42v - Operating Temperature: -49
185°F - LEDs: High Powered 3w LEDs - Drawing 180 Watts - LED Color:
White,Yellow, Blue, Red - LED Life: 50,000hrs - Style: 2 x Horizontal Rows
Body: Stainless Steel Mounts with Rubber Cushion; Beam Patterns: Flood,
or Combo Beam; Housing Color: Black(flat paint) Custom Colors Available*
Housing Type: Aluminum Body - Waterproof: IP68
LED Underbody Glow Strip Installation How-To & Demonstration
This video will show you how to install the LED Underbody Glow Strips
offered by P.S.Team on eBay and demonstrates the 15 modes and seven colors
of the underbody glow kit. This installation was done on an Audi A3,
however the principles of installation are the same for virtually every
vehicle. Follow along with our installation or just enjoy the light show.
For installation, you'll need to have the following items which are not
included with the kit:
3M Doublesided Automotive Adhesive Tape
Videography & Voiceover by "Nitro Nick" Gregson