Horn Upgrade - 1997 Toyota 4Runner
The horn on my 3rd gen 4Runner sounded too wimpy. I was embarrassed to honk
at other drivers, even though they clearly deserved it. In this video, I
show how I upgraded my factory horn to a much louder American horn from a
1994 Ford F150.
4Runner & Tacoma fun
2002 4wd 4runner 3" lift, 285/75/16 MT's.
2001 4wd Tacoma 2.5" lift 255/85/16 AT's.
Jemez and Rio Puerco, NM
Big 3 Upgrade: 4Runner How To / Before & After
Well it's actually a big "2" upgrade. I have at the moment 8 gauge going
from negative to chassis.
Big results. I really recommend doing this. My car is alot more happy now.
I would probably place this on my to do list before adding a capacitor from
now on. Or before installing the whole system for that matter!
"How To" Install Sound Deadener on your Camaro & Trans Am FOIL Style
This video shows how to install a foil style sound deadener (under capret
nsulation on your 1970 - 1981 Camaro or Trans Am Firebird. We
offer this material on our site for sale also. This video will give you the
in's and out's for a smooth install that you can do at home on your classic
muscle car or truck!
Seafoam 2002 4Runner
Cleaning the engine in preparation for Installation of the TRD Supercharger.
Take a look at my other videos!
(HD) Texas_Ace TRD Supercharged 4runner Overview with Big Burnout & Street pulls!
Please comment below and let me know what you think of the video as a
whole, I usually make my videos much shorter then this, I am experimenting
to see if there is any reason to go into detail like this or if it is just
pointless and keep it to 1-2 min videos with no real details.
This video is about my TRD supercharged 4runner. This video Is a general
overview that some people have wanted to see. Starting about halfway though
the video is the street pulls and burnouts. If you just want to see those i
have another video with only the driving part of the video since most
youtubers have the attention span of a 5 year old.
In my other videos i show the truck on the Dyno, at the track, on the
street and a more in-depth mod list.
Feel free to ask any questions you want, i will do my best to answer them.
If you need more help then i can give, some boards to check out are :
www.Customtacos.com for performance questions
and www.Yotatech.com for everything else, this is where the build threads
for this truck are located under the user name Texas_ace
When you get the headliner board out (remove the trim, dome lights, sun
visors, etc, then the board), this is how you prepare the headliner board
and replace the fabric - Hancock fabrics has the material available for a
little more than 10 bucks a yard - this material cost about 30 bucks (3
yards). It requires no special equipment. This lady is Debbie - she
taught upholstery at the college for years and is very good at what she
does. This headliner was for my 2001 Jeep Cherokee...
How to Install Replace Taillight Toyota 4Runner 96-02 1AAuto.com
1A Auto shows you how to install, repair, fix, change or replace a broken,
damaged, burned out, cracked, faded, cloudy or chipped taillight. This
video is applicable to the Toyota 4Runner, years 96, 97, 98, 99, 00, 01,
2004 Toyota 4Runner Transmission Fluid and Filter Change (Part 1) -EricTheCarGuy
Visit me at: http://www.ericthecarguy.com/
Discussion about this video:
To be honest if I were to do this job again I would just change the fluid
and leave the filter alone. It's much less of a headache and you won't
have to worry about the Exhaust which
would be the most challenging part in my opinion. Aside from that it's not
likely a filter change will have any real benefit since it's a closed
system. In addition there is some speculation as to what the service
interval actually is for the transmission fluid and filter is. Lastly be
sure that you have some sort of pump to get the fluid into the transmission
before you get started because as I show in the video there is no dip stick
for this transmission that you can fill through. You also need to be sure
to use the proper fluid, I've got my fingers crossed that the MaxLife that
I used will hold up fine, so far it's been about 2 months since I shot this
video and it seems to be fine. In all it's not a bad job there are just
specific procedures that need to be followed to be successful with it.
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee
against unauthorized modifications of this information, or improper use of
this information. EricTheCarGuy assumes no liability for property damage
or injury incurred as a result of any of the information contained in this
video. EricTheCarGuy recommends safe practices when working with power
tools, automotive lifts, lifting tools, jack stands, electrical equipment,
blunt instruments, chemicals, lubricants, or any other tools or equipment
seen or implied in this video. Due to factors beyond the control of
EricTheCarGuy, no information contained in this video shall create any
express or implied warranty or guarantee of any particular result. Any
injury, damage or loss that may result from improper use of these tools,
equipment, or the information contained in this video is the sole
responsibility of the user and not EricTheCarGuy.