Inspecting the Timing Belt - AutoZone Car Care
http://www.autozone.com/autozone/parts/Timing-Belt/_/N-8gcts?newYmme=true In the second installment of the AutoZone Complete Car Care - Timing Belt Series, Bruce Bonebrake shows you how to inspect your timing belt and how to prepare for a timing belt installation. Find out what steps you need to complete before you can replace your timing belt.
Get everything you need to do the job right at http://www.autozone.com
Astra Turbo (z20let) Timing Belt Install - Part 1 of 2
Warning. Serious damage may occur to your engine if the timing marks are not correctly positioned. Only undertake if you have the tools and the confidence for such a job.
Please source other advice and guides to compliment this video.
Time lapse installation video of removing the z20let timing belt and replacing the water pump. Installing the new timing belt is in part 2.
Rover K-series Head Gasket Cooling Issues
AUTOiNFORM http://www.autoinform.co.uk is a FREE bi-monthly, online publication that offers the automotive aftermarket a fresh, exciting new platform using high quality video and interactive page layouts. Patrick Warner discusses the K-Series engine overheating and cooling issues
Vauxhall 1.9 CDTi Timing Belt Renewal Guide.wmv
A video guide to replacing the timing belt on a Vauxhall/Fiat 1.9 CDTi 150 engine. Use in conjunction with a Haynes manual or similar and only attempt if you feel confident enough and can afford to ruin your engine if you get it wrong...
tensor automatico distribución psa
funcionamiento del tensor automático de una distribución, en este caso un motor psa 1.6 16V gasolina NFU (TU5JP4). Fallos después de aparcar con la velocidad metida...
Rover K-series, faulty intake gasket
At the morning the engine did not crank at all, so we did thought that the battery was dead.
After few attempts with jumper cables the car started but the running was very poor. Closer examinations show that the crankshaft did not rotate smoothly and piston n:o 4 was at TDC lower than the others.
Now we're taking the engine apart to see the damage, at this stage it seems that the intake manifold gasket has leaked coolant into the 4'th cylinder and hydrolocked it, causing bent rod.
Too bad that this happened after year of problem-free driving after head gasket failure repair when we did full head job(cost approx. 800€ + job) with new gaskets - including this improved intake manifold gasket...
Mitsubishi Timing belt Part 1
How to replace a timing belt on a Mitsubishi 3.0 quad cam engine. Here's a way to do it without expensive tools to hold the cams in place. This is a 2 part video, watch both for the complete procedure.