1987 SS Monte Carlo for sale (cheap)
Hello, I am selling my 1987 Monte Carlo SS.
The Car is a 1987 Monte Carlo SS. The car is simply 99% Barrett-Jackson or MEKUM Material, . The Engine is a Full Roller, PAT MUSI Racing 468 BBC .This Car is LOADED!! AC, PB,PW PDL, CD Stereo (removable face plate) B&M 3800 RPM 410 H.P Stall Speed LOCK UP converter with B&M control box Bulletproof 700 R4, 12 BOLT POSI 355 gears! Sun Pro Tac, Killer stereo !! COLD A/C, WELD Wheels. DELUXE #3 Dale Ernhart LEATHER Interior...more to come..
468 ci pump gas motor GM Block Boredand Honed to 4.310 Square Decked. GM Nodular CrankGM Rods with ARP Boltsand SPR Pistons 10 to 1 Balanced Exturanlly, Billet Steel Hydraulic Roller with Billet Steel Hyraulic Lifters with COMP CamS Roller Rockers , Manley Pushrods 3/8 , GM Panand MellingOil PumpbCLOYES hex adjustable Timing Chain Double Roller, EDELBROCK OVAL Port Heads with Stainless Valves ,2.250 Intake and 1.880 Exhaust with hydraulic springs EDELBROCK Performance Oval Port Manifold .EDELBROCK 800 CFM CArb , MSD Distributer *.* wires ARP HArdware and Head bolts. Fully Assembled MERCH Peformance Pully Set up. This car has Current PA State Inspection and Emmision This Car DOES NOT LEAK A DROP! Check out the You Tube Video
Hell's TA - 80 Trans Am SE LS9 Super Charged ProTouring - Dyno Session
Final Dyno session putting down around 409hp to the ground and 630hp to the flywheel, with Exhaust cutouts closed. With them open, it gains another 10-15hp. This 1980 Special Edition TA, one owner car out of NY that we are just finishing up for the owner, is sporting full DSE equipment, Year One 18x12 and 18x10 snoflakes, a new LS9 crate motor, complete custom KillerPaint.com Mike Lavalle flamed hood bird and accents, Kenwoods new state of the art Double DIN DVD NAV system. Leather interior, mini tubbed, full protouring suspension, custom engine covering ,etc. We will be posting a full video of this car after completed so everyone can see all the details!
1987 Monte Carlo SS LS1
This is my 87 Monte SS I built about a year and a half ago, it has an 00 LS1 in it with a 4L60E trans and the stock 7.5, with 4:10s, Auburn posi, Moser 28sp axles, T/A girdle. Properly built, with good parts, the 7.5" can take close to 500ft. lbs.
How To: 4 Wire LS Wiring Harness Conversion, Part 2
In part two we begin modifying wires in order to make the wiring harness fit differently on the engine as the computer is being relocated from its original factory location. Power wires and grounds are dealt with, and we show how to modify the factory truck injector connections to work with an LS1 intake and injectors.
Wiring Harness Pinout: http://lt1swap.com/99-02_vortec_pcm.htm