Fully Built Turbo H23 Honda Prelude Project
The begining photos of my car are from the day i bought it. The videos in
the middle are me having fun a year later with my newly installed turbo kit, and the end is me taking my engine out,
fully building it and there is a list of everything i used in the build.
This is for people who appreciate a correctly built h23 street beast.
Stay tuned though, the engine is coming in soon, and im expecting 400wtq on
Turbo prelude 329whp prelude 2000 sh
2000 sh prelude on stock block, stock head, stock tranny w/ atts diff
disabled, stock everything. Bolt-on custom turbo made by ludetech/c61lude .7 bar 329whp Car
ran for 1 year 8500 miles. turbo was
bolted on at 138k miles burns no oil runs proper. From a 40mph-120mph 2nd
gear roll on it's as fast as a stock honda cbr600rr. turbo was eventualy pulled off and car was sold to
a freind. Car is still running proper.
780 whp Honda Prelude Turbo - Borg S372 Dyno video of my Honda
Prelude at 32psi on C16 fuel. Car uses F20B block, H22A head, S372 turbo, stock cams. Tuned with Hondata S300. This
is a reupload of the same video with a new lame song since sound was
removed from my other video due to copyright issues.
AFAccord's 417whp F23 Turbo Accord - HD Vids and Dyno
I only had a week to drive the car after it was tuned and wasn't able to
wire up my ECU switch in time to get any high Boost runs on video. Sorry guys! I'll make
plenty of high-Boost videos when I
come home, so subscribe!
Music rights belong to Gemini - Graduation of AEI Media.
Parts and Specs:
-F23 block, bored to 86.5mm
-Wiseco K20 spec pistons @ 10.2:1 compression
-SwainTech ceramic coating on piston crowns
-Crower F23 rods
-OEM main bearings (pink across all journals)
-ACL HX rod bearings
-Kaizenspeed balance shaft delete kit
-Bisimoto heat-shielding intake manifold gasket
-Bisimoto Pro valve springs
-Bisimoto Pro valve retainers
-Bisimoto cam gear
-Innovative 65A engine mounts
-Maxbore F23 throttle body
-MFactory limited slip differential
-DIY ramhorn turbo manifold
-DIY 2.5" charge piping from CXRacing
-28"x8"x3.5" FMIC from Go-Autoworks
-Triple-core half-size radiator from Go-Autoworks
-3" Straight pipe Exhaust
-3" Vibrant Flat black muffler
-Garrett T3/T4 57 trim turbo
-ACT Xtreme pressure plate
-ACT Streetlite flywheel
-ACT performance street disc
-Tial 38mm wastegate
-Tial Q BOV
-P61 OBD1 ECU
-Tuned using eCtune by the infamous... Joseph Davis!
My jdm honda prelude type S- updated!
Mods: skunk2 pro stage2 cams, retainers and pulleys
tein superstreet coilovers front and rear
dc sports manifold, jap speed decat pipe, skunk2 Exhaust system
auto-manual tensioner conversion, AEM v2 air intake,70mm
matching ported intake manifold. Apexi afc neo- mapped on Dyno-245bhp
Ap2 s2000 clocks fitted, DC5 integra steering wheel, Razo
Tenzo R gear knob, billet aluminium locking nuts, Budyclub P1
Pager alarm system with remote start, reverse camera, Pioneer
avic 900 dvd.
HKS speed defender, and HKS fuel cut defender.
HONDA V-Tec Operation
HONDA V-Tec Operation
Get the book here: https://www.createspace.com/4321251
Describes the operation of the HONDA V-Tec variable valve timing system.
Like never seen before, this animation goes into details on the mechanical
principle of the V-Tec system. The Honda V-Tec system is a dual setting
variable valve timing system. It is meant to give high efficiency and low
power at lower RPM and high power and low efficiency at higher RPMs. There
have been a few incarnations of V-Tec, which came out in the late 80's, but
their principle is the same. See it all here with high quality visual
Amazon Printed-Books & Kindle:
Google Play Android APPs:
Amazon Video DVDs:
Barnes & Noble Nook:
Apple iTunes iPad:
H23 Honda Prelude Turbo Dyno 237whp
my h23 turbo on a Dyno.
baseline run: 218whp, 214wtq
^^ what you see in my other vids
after Dyno: 238whp,
^^ what your gonna see
10psi on 6psi baseline---
mind you, tuned, id hit almost 300whp STOCK!