Unclogging A Heater Core - EricTheCarGuy
Unclogging A Heater Core - EricTheCarGuy
There is a lot more here than meets the eye, the original video cut was about 16 min long. As you can see we did have some fun. I may post some of the out takes at some time in the future. I thought you might want to cover the process here and that's what I went for.
Thanks to http://www.youtube.com/user/Davidsfarm for the procedure for this and hopefully for letting me post this as a video response to his video.
If I think of anything else I think you need to know with this I'll post it later, for now I have to run.
Click below and Stay Dirty
Visit me at EricTheCarGuy.com
Visit EricTheCarGuy Forum
Visit my Facebook Page:
Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.
Ford Expedition Heater Core Replacement Step by Step Video Year 2000 and up....mpg
its an easy job, just be patient because there are a few hidden screws/bolts which may take some time. go step by step and don't forget the formation of the wiring, its not a lot but you might forget one behind the vents or something, you dont wanna open the whole thing for one wire. good luck and comment if you have questions about cars or this video. subscribe too.
Let's add some heat!
Swapped out the heater core on the '93 F150 today, and a few other minor things...
1971 FORD TORINO GT HEATER CORE REPLACEMENT
Here we have a short video of a Removed Heater Canister with heater core for a 71 Ford Torino GT. Remember to take pictures of connections and mark lines where needed with a sharpie and scotch tape for reassembly. Total time to remove the Canister was around 3 hrs but since this was our first ford Torino, there is a learning curve. I am sure if we had to do again, we could do in less than 2 hours. Also. We only removed the steel dash bolts where needed and loosend others to make the dash so lose we could manuever the Heater Canister underneath the dash without totally removing it.
Heater Core Blew up?! Help!
UPDATE: I've since replaced the heater core, it was indeed bad. The dumb plastic inlet hose was cracked and broken, which I'm assuming was from too much pressure buildup, which was probably caused by it being clogged. Anyway, here's an excellent how-to for a Pontiac Grand Am. If you own a Grand Am, and aren't a member of this site, you definitely should join! They're a great community, and very helpful. http://www.gaownersclub.com/forum/showthread.php?t=29080
Well, I think my heater core blew out in my 1998 Pontiac Grand Am GT V6. It's got 136K miles on it right now, and on my way to class this morning, I heard a sudden hissing sound, then steam started pouring out of my vents and it reeked like coolant, but there was no steam or hissing under the hood. When I shut the engine off, the hissing stopped, but the steam was still trickling out a bit. Every time I stopped, there was a nice puddle under the car. Here's what I found... HELP!!!
93 Ford Escort heater core replacement 1.9L 4 cylinder 1993 1992 1994 Install Remove Replace
http://f2fb7aea.tubeviral.com -Tipjar Site. 1993 Ford Escort heater core replacement. how to replace the heater core in the ford escort with a 1.9L engine 4 cylinder 1992 1994
Sign up for Free car related information about fuel economy for 2012 vehicles, safety and theft prevention.
In 2012, 2 cars of ours were slightly ransacked, and my bosses son had his school
backpack taken out of their car while they ran into a store.
If you have found my video to be useful and has saved you time/money please visit: http://f2fb7aea.tubeviral.com My tipjar and informational site.
Amazon has anything and everything you need, you can get there here through my affiliate link, just copy and paste to get to the automotive section:
See a short video, an opportunity to donate AND a couple links to sites that offer you Full access to repair information for your specific car without having to hunt around the internet for it.
Overlay music, if any, by: http://joshwoodward.com/
Incoming/outgoing music snippet from: http://www.freestockmusic.com
Autotechviewpoint provides videos for informational purposes only and cannot be held liable for injury, damage, problems that arise when trying to duplicate steps shown in videos. I will be paid by Amazon a percentage of money if you purchase through any Amazon links on my youtube channel.
Get training and learn how to make extra money online.
HeaterTreater Ford Explorer-Ranger video part two
This is the second portion of the HeaterTreater video showing installation of the HeaterTreater blend door fix. The video covers Ford Explorer 95-01, Mercury Mountaineer 95-01, Ford Ranger 95-06, Mazda pickup trucks, Mazda SUV. http://www.heatertreater.net