Andrea Stang'
89 5-speed computer,
edlebrock heads,
B303 cam,
1.72 rockers,
3.55 gears,
world class T-5,
GT40 upper/ lower intake,
70mm mass air and TB,
SSC headers,
aluminum radiator
and drive shaft,
2.5 '' high flow cats,
2 chamber flow master mufflers,
155 lph in-tank
and 255 lph in-line fuel pumps,
24 lb injectors,
fuel pressure regulator,
air/fuel gauges,
lakewood traction bars,
center force heavy duty clutch
and adjustable clutch quadrant.
Subframe connectors,
new oil pump and
double timing chain.
5.0 with B303 cam
Had a friend take it around the parking lot so i could hear what it sounded like.
5.0 with B303 cam
1983 GLX Mustang convertible with a roller 302 HO and T5, 5 speed transmission. It has the 87-93 LX front bumper along with new clear headlights and a Cervini 4" cowl hood. Car is lowered 3" with aftermarket springs, its had an 8.8 with posi put in along with the quad shocks. I just installed a 302 high output motor out of a 93 gt Mustang along with a Parker Funnel Web single plane intake, Ford Racing B303 camshaft, heads were rebuilt with new valve springs and 3 angle valve job, Ford Racing 8mm wires, MSD cap/rotor and ignition coil, Summit racing fuel filter, Mr. Gasket underdrive pullies, new harmonic balancer, all new gaskets in the engine, carter 500cfm carburetor, Flowtech long tube headers with 2.5" Exhaust running back to Thrush chambered mufflers. Interior is stripped to front seats, harness bar, and 4 point racing harnesses (street style locks). The interior was stripped of the carpet and was primered/painted glossy black. The wheels consist of 17x8 & 17x10 Saleen SC wheels with 225/55/17 tires up front and 11" wide kumho Ecsta 275/40/17s in the back.
86 Mustang gt mild cam, full flowmaster exhaust video for sale
86 Mustang, 306ci, long tube headers to full flowmaster Exhaust, trick flow upper and lower intake, cam, bbk cold air intake, under drive pulleys, everything msd under the hood you can get, stage 2 clutch and 3:73 some more goodies also over $12,000 invested
1990 Ford Mustang GT 5.0 FRPP B303 Camshaft Idle and Rev
Short clip of cold start on my car. Tuned by Alternative auto performance in Chesterfield MI
FRPP B303 camshaft
FRPP GT40X Heads
BBK SSI Intake
BBK Longtubes
BBK H-pipe
Dumped Flowmasters
1992 Mustang With Trick Flow Stage 1 Cam
My just rebuilt 5.0 302 1992 Mustang Gt on a cold start. This is my first car. My dad and I just rebuilt this engine. The Exhaust is Bassani longtube headers, Mac Prochamber (Offroad), Flowmaster catback. And also there is no smog pump. I don't have a hood at the moment because it is in the paint shop.The hood is a Cervanis 2.5 cowl. Thanks for watching!
Mods are:
Gt-40 Heads and intake
Trick flow stage 1 cam
Crane 1.7 roller rockers
70mm Throttle body with matching EGR spacer
Moroso Valve Covers
1/2 Intake Spacer
Bassani Longtube Headers
Pro 5.0 Shifter
3;73 Rearend Gear Ratio
Summit Racing Spark Plug Wires
Steeda Underdrive Pullies
Ford Racing Lowering Springs
Stedda Caster and Camber Plates
C&L 76mm mass air/ Cold air kit.
Mac Offroad Prochamber
Flowmaster Catback
I'm sure i'm forgeting many things.
5.0 Mustang pull in car cam
I no longer have this car...unfortunately
**~~COMMENT AND RATE PLEASE~~**
acceleration tests for the camera position when I drag the car. I need to set the focus and raise the camera.
~~Mods List~~:
-JBA 1 1/2 Shorty headers
-2.5 in Mac o/r H pipe
2.5 in Flowmaster American Thunder system
-Motorsports Cam (B303 or E303)
-BBK CAI
-Edelbrock RPM intakes
-1 inch intake spacer
-AFR 165 Heads
-Motorsports 1.6 Roller Rockers
-Hardened pushrods
-FRPP Hydraulic lifters
-70mm Power Throttle body
-2 inch 70mm EGR spacer
-76mm C&L MAF
-30# injectors
-Adjustable FPR
-255 lph Walbro Fuel pump
-Spec Stage 1 clutch
-UPR Adjustable Clutch cable/firewall Quadrant
91 Mustang GT
5.0
302 Smallblock
Trickflow twistedwedge aluminum heads {new}
Stage 1 trickflow cam
Upper and lower cobra intake
shorties
h-pipe
flowmaster
no cats
373 Gear
Highperformance roller rockets, pushrods, and lifters
shortshifter
(and a badass sexy driver) ;)
Mustang 5.0 E303 cam
1991 Mustang LX 5.0, bbk cold air intake, underdrive pullies ,MSD ignition coil, bbk unequal length headers, bbk off road h-pipe, sub frame connectors, 373 gears, flowmaster american thunder catback, ford racing e303 camshaft with cloyes roller timing gear and chain.
Trick flow stage 1 cam.
My just rebuilt 5.0 302 1992 Mustang Gt. My dad and I just rebuilt this engine. I will have a video of this car soon on the road. The Exhaust is Bassani longtube headers, bassani x pipe, Magnaflow catback.
One of these days i will get around to putting on my offroad prochamber and flowmasters. And also there is no smog pump.
Mods are:
Gt-40 Heads and intake
Trick flow stage 1 cam
Crane 1.7 roller rockers
70mm Throttle body with matching EGR spacer
Moroso Valve Covers
1/2 Intake Spacer
Bassani Longtube Headers
Pro 5.0 Shifter
3;73 Rearend Gear Ratio
Summit Racing Spark Plug Wires
Steeda Underdrive Pullies
Ford Racing Lowering Springs
Stedda Caster and Camber Plates
UPR Fenderwell Cold Air Kit
I'm sure i'm forgeting many things.
This is also with the stock mass air flow, I will soon be buying the C&L 76mm mass air/ Cold air kit.
