This truck has a dana 60 up front and 14 bolt out back with 456 gears and lockers. It has a new 454 with about 600 miles on it , holley electric fuel pump with 1/2'' steel braided fuel line from the tank to the holley 750 carb. sitting on a edelbrock performer rpm intake, turbo 400 transmission with 3500 tci stall converter that was built by JET, 208 transfer case, all new poly bushings front to rear, power windows, door locks, and tilt wheel, has a 6'' suspension and 3'' body lift, 39.5x18x16.5 boggers (3/4 tread) on 12'' aluminum wheels, 3'' dual flowmaster Exhaust, cross over steering with dual stabilizers.
Manny's Super Clean and Super wild Chevy 4x4 k10 Rolling chassie One Ton Swap
Filmed with motorola phanton is 720P
Edited with Adobe premiere pro cs5.5
music by; Rickvanman check him out on youtube
LINK TO TRUCK RUNNING http://youtu.be/AdP0U0j8lNk
Shackle flips and Part for k5 blazer and k30 Truck http://diy4x.com/
My buddy manny has been working on his k10 to k30 build for over 6 years now, The truck was pretty damn nice before i started breaking it down to rebuild it and make is super clean. Has a 383 stroker engine with 550hp and 550tq all under 6,000 rpm. The chassie had been cleaned and sanded and blasted down.
Rust Bullet was applied to prevent and to kill any rust that was left over.
Chevy K30 wheeling in Sweden
A small offroad-trip in my back-yard ;-)
For more info about the truck, visit:
Kodiak Rock Uwharrie 203/205 doubler OX locker
My neighbor on Kodiak rock runnin 42'' tsl's one tons locked up with 5.13's and a double transfercase the clicking you hear is the u joint in the front cv drive shaft it spit out a cap a couple mile's down the trail after this.
My 1985 Chevrolet M1008 walkaround and startup
This is a quick video of my 85 CUCV Chevy M1008. 6.2 liter J-Series diesel. Still has all the military components with the exception of the radio antennae mount, and the officer light. Modifications include a set of Hella 550 fog lights, and 3 inch straight piping from the manifold back, side exit.