a combination replica of the Mugen style intake system and the Spoon style intake elbow. it was made in about an hour and has decent power gains. the best you can get for only $5. too bad its on a sohc :(
music by tool (doesnt really fit but its cool anywhy)
leave a comment. what do you think?
6 Peoples Reactions to the CRAZY 900hp 3Dx Evo
We had a blast giving people rides in the Evo, even had a guest driver when
we gave Miss Thai Thai a ride after her photo shoot! See what people
thought about the car, caught a lot of people off guard.
TEXAS STREETS & TX2K13 Release now and shipping! http://www.1320video.com
Supercharged home made Straight Eight by Desperate Dan Vid 2
Built in a shed, it fired up first go. I was hoping it would sound real
lumpy like a drag engine, but it runs too smooth, and it's too quiet even
with unsilenced 9" pipes! The timing was a pain to sort out the Rover
distributor runs backwards, I had to take the heads off to work out the
firing order!!! See the shed it was built in on Vid 1.
Added May 2012: OK, my nails are dirty, maybe because I'm an engineer &
build stuff? Maybe your nails are clean because you can't build eff-all &
just sit behind your computer? C'mon folk, get a life.
Homemade Cold Air intake
1992 Toyota Celica homemade intake
-I can't believe how many morons are posting stupidity in the comments. Let
me clear up some stuff for those of you and the other intelligent people:
1. This video is from 2001 BEFORE intakes were cheap and widely available.
The owner of the car was in high school and didn't have a real income (what
would you do?).
2. The breather was from some internet misinformation from back then. That
information sounded intelligent at the time.
3. Why would you dump a ton of money into a 9 year old beater?
4. It didn't take as long as it looks. The video was started before the
parts were even purchased. That time spent at the store is why it looks
Parts: 3" PVC piping and rubber fittings, aluminum tape, and a cheap
generic cone filter costing roughly $60 total.
Catback Exhaust - Explained
What is a catback? How does a catback increase performance? Why should you
get a catback Exhaust kit? This video
explains the benefits of a cat back Exhausts, using a Yonaka Motorsports sourced cat
back Exhaust for Acura Integras.
Yonaka Catback - http://www.yonaka.com/Yonaka_94_01_Integra_2DR_Catback_Exhaust_p/ymcb002.htm
Yonaka Motorsports - http://www.yonaka.com/
-- Related Videos --
Catalytic Converter: http://youtu.be/HADOcrcMikA
Please feel free to rate, comment, and subscribe!
And don't forget to check out my Facebook page:
Also check out my official website: Make suggestions, participate in
forums, learn through logically ordered lessons, read FAQs, and plan your
Now on Twitter:
NEW VIDEO EVERY WEDNESDAY!
How to Customize a Universal Cold Air Intake Filter System - Pep Boys
Spectre Performance demonstrates in this video how to customize a universal
cold air intake kit using parts you can find at your local neighborhood Pep
Boys. Using universal parts you can simply assemble them in any fashion to
create the look you want to make.
First we take off the existing air cleaner and install a single 4 inch
plenum. Lay the plenum where your air filter was and put it in any
direction you like. Screw on the plenum with the existing air filter nut or
a custom nut of your choice. You will need couplers that will connect the
different intake tubes together that can be turned to mold within your
engine compartment. Simply slide on the coupler to the plenum and fit
accordingly. Secure the clamp on the coupler to the ridge inside and then
you can add additional tubing for the length you desire. Remember not to
tighten the clamps too hard, because you may need to move your tubing
around until you create a final fit. Rotate and adjust as needed. Attach
your air filter to the end of the tubing. You can find inserts that go
into the filter to accommodate a 3 or 3.5 inch tube. Once you have the
final placement in place, be sure then to go back and tighten all of the
clamps to hold the filter system securely in place.
The advantages to having a custom air intake filter system located in the
front of your engine is that you can take advantage of the air stream and
receive colder air going into the intake system instead of the hot air that
your standard filter was providing. Customizing your cold air intake
system is pretty simple once you know a few simple tricks. Not only will
your new custom air intake system look great, but it will increase your
engine's overall performance.
You can see more of these great DIY'er videos from www.pepboys.com or stop
in your local Pep Boys for more information.
Design Your Own Custom Cold Air Intake
Spectre Performance has come out with a probfab quick kit allowing you to
easily create your own custom cold air intake.
For more information visit:
You can now find us on myspace:
Add 30 horsepower to any Mustang ( in 5min )
Checkout HD photos & a complete list of My Mustang upgrades w/costs on my blog:
http://homeadditions.blogspot.com *[Complete Part List Below]* After this
modification the quarter mile dropped from 14.4 @ 103mph to 13.8 and from
106mph! This alone was worth the $500 Superchip purchase.
Here is a list of the upgrades at the time this video was taken (These
aftermarket parts add up quickly):
1999 Ford Mustang GT
Convertible *Custom ordered all options $27,709.00
Viper 300 ESP alarm with radar sensor and power window roll-ups $455.80
Paint and install Saleen Body Kit $1,000.00
Bassani X-pipe with 2 hi-flow cats $439.99
*Installation X-pipe $150.00
S281 Saleen wing with brake light $231.21
Saleen Speedster Light Bar $471.41
Saleen Decals $33.22
Saleen Windshield Decal $30.58
Tints 35% silver rear/50% silver sides $116.60
Flowmaster Mufflers $212.00
Underdrive Pulleys $127.15
*Installation Pulleys $100.00
Saleen Chrome Center caps $59.99
Custom Programing for Superchip $185.50
SuperChip for ECU $291.50
Saleen Body Kit $1,700.00
Saleen License Plate Frame $20.00
Centerforce Dual Friction Clutch $355.00
*Installation of Clutch $600.00
Ford Racing Stut Tower Brace $110.72
Bilstien shocks $600.00
*Instalaltion Bilstien shocks & struts $300.00
Steeda Tri-ax shifter $200.00
Saleen STYLE 18" Chrome Wheels $1,499.00
Brembo Front Brakes $1,500.00
Brembo Slotted Rotors w/pads rear $238.77
*Installation Rear Rotors and pads $100.00
Ebach progressive lowering springs $300.00
*Installation Ebach Springs $174.90
HID Headlight Conversion Kit $279.95
Saleen Hood $900.00
*Paint hood $530.00
MAF Conversion to 80mm $100.00
EGR Spacer $50.00
K&N Air Filter $60.00
70 MM Ford Racing Trottle Body $300.00
Custom Ram Air $50.00
Whiteface gauges with AC template $50
JVC KD-HDR50 HD Radio CD MP3 USB IPOD $133
Optima Yellowtop batter and trunk relocation $250
I used a Gtech Pro to test my quarter mile before and after. Before the
Superchip I was doing 14.4 at 103mph, after the Superchip I did 13.8 at
106mph. For each test I did 3 runs and took an average.
In less than 15 minutes and a few hundred bucks, you can add 30 horsepower or more depending
on the model year of your Ford Mustang. My Mustang is an upgraded 1999 GT and I
had my Superchip custom programmed for all the modifications that I made to
The Superchips unit plugs right into the back of the stock car computer ECU
(engine control unit).
*Don't forget to disconnect your car battery for 10 minutes during this
upgrade; this will allow the car computer to recalibrate itself. You know
that you have done a proper job resetting your computer if when you start
your car, you notice that all the gauge needles sweep to the left then
If you have any questions, shoot me a comment and thanks for watching.
***Please subscribe to my channel and I'll make more videos like this!
Video sponsor: http://www.simplyadditions.com/
Home made Intake
Home made intake on my 97 obs. One of the many diy mods I've done to my