More Videos...

How To Replace a Front Wheel Drive Axle - EricTheCarGuy
How To Replace a Front Wheel Drive Axle - EricTheCarGuy http://www.ericthecarguy.com/ There were a lot of requests for this and I finally found the opportunity to shoot this video so here it is, enjoy. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Oops, Axle and Ball Joint Replacement - EricTheCarGuy
Oops, Axle and Ball Joint Replacement Sorry I missed you last week, I had this video half done and didn't get a chance to finish. Well we have our 1990 Accord again, I'm getting some mileage out of this one but I don't mind cause there are still quite a few of these on the road and a few of you have claimed ownership to one of these 4th generation Accords, so enjoy. A couple of things to note, I could do a video on taking out the wishbone bolt alone, I've run into a few problems here such as a rusted bolt that won't come out of it's bushing as one example, perhaps future videos will show how to overcome this problem. I thought this one went together well despite the fact that you might be getting sick of Honda Accords, I still have more from other makes that I haven't edited or posted yet. I have more to this video as well that may show up in DVD form at one point, YouTube only gives me 10min to work with but I think that is enough to get you started and not lose interest. Perhaps you could help by submitting questions in the form of text responses or what I would really like is a video response to something I've put out there, that would be great. Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Find Suspension Noises 101 - EricTheCarGuy
How To Find Suspension Noises 101 - EricTheCarGuy http://www.ericthecarguy.com/ This is probably one of the most popular questions that I get so I'm happy to bring you this one because I know it's going to save me some typing. I may have missed a couple of things but I believe I've covered the basics on this one so this video should give you more than enough to start with. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Replace Rear Disc Brakes (Full) - EricTheCarGuy
How To Replace Rear Disc Brakes (Full) - EricTheCarGuy http://www.ericthecarguy.com/ I had to split this one into 3 parts when I first posted it and I'm happy to bring it to you now in it's full form. Enjoy. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

CV Axles - AutoZone Car Care
http://www.autozone.com/autozone/parts/CV-Axle/_/N-6o2dc In the first installment of the AutoZone Complete Car Care - CV Axle Series, Bruce Bonebrake explains CV axles, one of the major components of a front wheel drive transmission system. Learn why inspecting CV joints should be part of your regular vehicle maintenance. Also learn about the tools you will need to replace your cv joints. Get everything you need to do the job right at http://www.autozone.com

How to Replace Drum Brake Shoes, 2001 Odyssey - EricTheCarGuy
How to Replace Drum Brake Shoes, 2001 Odyssey - EricTheCarGuy http://www.ericthecarguy.com/ Well here it is kids another offering of my most popular subject to date, drum brake servicing. I know it's long but I've put a few extras in it for you that I hope you will like and will help you with other things besides just replacing the shoes. Feel free to comment on anything I might have missed, I know I misspoke on a couple of occasions in the video, forgive me as sometimes my mouth says different things than my brain is thinking. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How Oil Pressure Works - EricTheCarGuy
How Oil Pressure Works - EricTheCarGuy http://www.ericthecarguy.com/ Here is the second offering from last weeks set of videos. The most important thing to note with this is that oil pressure is not created by the pump but rather the resistance to the outlet flow of that pump and part of that resistance is the clearances between the bearings and the other parts inside the engine. If nothing else I hope you are entertained, enjoy! --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

Pressing out a front wheel bearing
How to get at and press out a wheel bearing. I used a12 ton hydraulic press and it was lots of power to press it out as some were wondering about that part. Be sure to not get hurt using the press as metal will fly under pressure if not placed safely.

Replacing Front Wheel Bearing Impala,Grand Prix (part 1 of 2
Replacing Front Wheel Bearing Impala,Grand Prix (part 1 of 2

Inner Tie Rod End Removal Walkthrough updated
Inner Tie Rod End Removal Walkthrough updated

Rebuilding CV joints - part 1
Follow along while I rebuild the CV joints from my '73 Porsche 914. A lot of the assembly applies to all CV joins.

How To Torque Cylinder Head Bolts - EricTheCarGuy
How To Torque Cylinder Head Bolts - EricTheCarGuy http://www.ericthecarguy.com/ Well this was a fun one to make. I believe I covered everything but if you feel I haven't please let me know in the comments below as well as any tips you might have to add as well. I'm not trying to make a big deal about "pound feet" or "foot pounds" I'm just trying to put that out there, the important thing is that you get the proper torque and get the job done right in my opinion, what you decide to call it is up to you. --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

CV Boot replacement 2g DSM rear inner
CV Boot replacement 2g DSM rear inner. All the information is in the vid.

How to Find a Bad Wheel Bearing - EricTheCarGuy
How to Find a Bad Wheel Bearing - EricTheCarGuy Well as I said in the video I shot this some time ago but never posted it. I've been snowed in for a couple of days so I haven't been to the shop to make some new video so I decided to bring this one up from the vault. The idea is to give you some basic information on how to find a bad wheel bearing, replacing it once you find it is another story but diagnosing is the first step. Now, another way to find out if you have a limited slip is to jack up both sides of the car and rotate one of the drive wheels. If the wheel on the opposite side moves in the same direction you probably have a limited slip differential. If the wheel spins in the opposite direction you probably have a regular differential that is not limited slip. As I said in the video a bunch of times be careful doing this, use the parking brake and brace the rear wheels with something. I know you'll do the right thing. Now on to the recommended channels http://www.youtube.com/user/realfixesrealfast http://www.youtube.com/user/roadragecustoms --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- As always stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.

How To Remove Pressed-on Bearings - EricTheCarGuy
http://www.ericthecarguy.com/ I know this one does not cover an entire procedure but it just worked out this way. I did however want to show how to remove this type of bearing should you run into it. I didn't show the installation for 2 reasons on this, first, I just didn't have the time to shoot it, and second I recommend pressing new bearings on rather than hammering them into place (I don't have a press yet). I would say that hammering them is OK but you risk damage to the bearing and if that happens it is a lot of work and more money to fix it. Be sure to wear your safety glasses! Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.  --- Click below and Stay Dirty Visit me at EricTheCarGuy.com http://ericthecarguy.com/ Visit EricTheCarGuy Forum http://www.ericthecarguy.com/forum/default.aspx Visit my Facebook Page: http://www.facebook.com/EricTheCarGuy --- Stay dirty ETCG Due to factors beyond the control of EricTheCarGuy, it cannot guarantee against unauthorized modifications of this information, or improper use of this information.  EricTheCarGuy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. EricTheCarGuy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video.  Due to factors beyond the control of EricTheCarGuy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result.  Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not EricTheCarGuy.