More Videos...

88 MUSTANG PRO STREET 671 BLOWER
My 1988 Mustang 347 stroker with hampton 671 Supercharger. S&W back half with ladder bar suspension. Ford 9 inch 4.56 gear

87 mustang 347

TrickFlow Twisted Wedge 170 Heads
This is a brand new set of Trickflow Heads ....

1033 RWHP
92 Mustang Dyno runs on 4-12-04 1033 rear wheel horsepower.

347 stroker
91 fox body. 347 tfs heads tfs stage 2 cam

347 STROKER
347 stroker, Aluminum Heads, Victor 5.0 Intake, Power pipe, Kooks Stainless headers and Mufflers, Offroad 3in X-pipe

Bobby's 86 88mm Turbo mustang spool up @Gus's drive in.
1986 Ford Mustang 88mm turbo built by www.otedesign.com

89 mustang trick flow stage 2 cam idle-stock exhaust
My 89 Mustang's idle with stock Exhaust

Trickflow stage 2 cam
Brandon 5.0 sn95. Trickflow Twisted Wedge heads, GT40 Upper and lower Intake, BBK Long tubes, BBk catless H-Pipe, And SLP Loudmouth Catback

N/A 347 Mustang with Anderson N-111 cam.
Here's a video of my good friend Travis's N/A 347" stock block LX. He just got the car up and running earlier this year and is starting to get it figured out. It has AFR 185 heads with a little port work, Anderson N-111 cam, and a Vic.Jr intake. I dont know the carb size but I dont think it's much more than a 650cfm. Trans is a Face plated TKO-600 and the car has a 4.56 rear gear. He was running on a 28x10 e.t. drag but they were wore out so even a 4500rpm launch rpm would still blow them off. This was a 10.8@129 pass with a 1.7x 60' time. Car weight is right around 2950lbs with driver. It'll go 10.40's with a new tire.

'92 Mustang Turbo 6.52@112.5
local track for test runs. leaving at 1500rpms 0 Boost. stock block 306 with a T72 turbo through a C4. BS3 as the standalone. 6.52 at 112.5

1992 Mustang GT 347 Stroker @ HIN/NOPI Show 2010
1992 Mustang GT 347 Stroker @ HIN/NOPI Show 2010

92 MUSTANG BURNOUTS
My stang burning rubber

SSP Coupe / Carburated 347 Stroker
Ga . State Patrol Car. Brand New Motor Converted to Carb.

First Run with New Trick Flow Kit
Trick Flow top end kit