When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $2931.60
Item#:CXR-TRB-KIT-LS-TRUCK-IC-BKS
You Are Bidding One Brand New
CXRacing Turbo Kit + Intercooler kit For
1st Generation 99-07 Chevrolet Silverado (GMT 800 Platform) with Vortec V8 4.8L/5.3L/6.0L
Fits 2WD, Does NOT Fit AWD (Cross Pipe Hits Driveshaft)
This Is A Solid Proven Kit, Perfect Fitment. We Developed This Kit From Scratch, Fully Tested, See Installed Pictures On and Outside the Car.
-
Perfect Fitment. Keeps All Stock Parts and Accessories. No Cut, No Relocation (Except MAF Sensor Wires Need to Be Cut and Extended).
-
Single Big T4 Turbo Provision, Supports 700-800 WHP.
-
60mm Vband WG and 50mm BOV Provision.
-
2.5\" Cross Pipe, Excellent Ground Clearance. Above Oil Pan Level.
-
3\" Turbo Downpipe then Enlarged to 3.5\" Exhaust Pipe
-
Much Better Response Compare to Rear Mount Turbo Setup.
We Developed and Tested This Kit Based on a 4.8L Motor with a T76 Turbo, Makes 335 WHP at Low Boost of 12 PSI, with 40lbs Injectors and Pump Gas. Considering the Power Lost from Crank to Wheel, Our Test Setup Makes Around 420-445 HP (vs 270-280 HP Stock Power)
For Larger Vortec V8 (5.3L, 6.0L) with Built Motor and Larger Turbo, This Kit Supports 700-800 WHP.
Note:
Exhaust Pipe Is 3.5 Straight Pipe, It Does NOT Have Flange Welded, You Will Need To Fabricate the Rest of the Exhaust System.
No Instillation Instruction Is Provided. But We Show Many Installed Pictures, It Is Very Intuitive.
Application:
Turbo: T76 turbo
Note: This Kit Is Developed Based on A 2002 Silverado, It Should Fit Other GMT800 Platform Vehicles.
Product Being Sold:
Turbo + Intercooler Kit + Turbo Headers + Cross Pipe + Downpipe + WG Dump pipe + Vband Clamps + Oil Line Kit
This is CXRacing\'s Newest Products for the Application Stated Above.All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.
Product Info and Spec:
-
Manifold:
CXracing\'s Proprietary Design, Keeps All Stock Parts and Accessories
Stainless Steel 1.65\" Runner Tube
Works With CXRacing\'s T4 Turbo Elbow Adapter. Flexible Fitment For Many Turbos
60mm Vband Wastegate Provision
2.5\" Cross Pipe with Vband Connections
Comes with 60mm WG Dump Tube
-
DownPipe:
2 pcs 3\" Downpipe Connects to Turbo (Fits Turbo with 3\" Vband Exhaust Outlet)
3.5\" Straight Exhaust Pipe
-
T4 Turbo and Wastegate:
4\" Air Inlet
2.5\" Compressed Air Outlet
Wet Floating Bearings
Standard T4 Flange
76mm Wheel Compressor
.81 A/R Turbine
3\" V-band Hot Side
60 mm 12Psi V-Band Wastegate
-
Intercooler Kit:
Bar & Plate Aluminum Intercooler
Core Size: 20\"x12\"x3\"
Overall Size: 27\"x12\"x3\"
3\" Inlet & Outlet
3\" Thickness Core
3\" Pipe Connects to Throttle Body, then Reduce to 2.5\" Intercooler Pipes
Comes with BOV, Silicon Hoses, and T-Bolt Clamps
Air Filter
Notes:
-
Off Road or Track Use ONLY, NOT for Street Use.
-
Due to the Complexity of Converting a Motor from NA to Turbo, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.
-
Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only.
-
This Comes with Black Hoses, We Offer Blue Hoses as Well, Please Check Our Other eBay Listings.
Click Below Picture to Watch Dyno Video