Racing Hart ZR Mesh 3-Piece Old School JDM 17x9.5/8 Wheels 5x114.3 -Nissan 300zx for Sale

Price: $1,250

This item has been shown 14218 times.

Racing Hart Staggered 3-piece Alloy Wheels.


This set of wheels was removed from a 1992 Nissan 300zx and should many cars that fit a 5x114.3 wheel.These wheels were made in the early 1990s and were a favorite JDM alternative back in the day.

Here are the details:

  • Racing Hart ZR Mesh 3-piece alloy wheels
  • Rear = 17x9.5, offset 30mm, backspace 5 5/8", weight 21 lbs
  • Front=17x8, offset 40mm, backspace 6 3/4", weight 21 lbs
  • Lug spacing = 5x114.3
  • Center bore = 60mm

Condition.

  • Each wheelspins straight and true on a balancer. There are no bends or evidence of damages or repairs.
  • The wheel mesh centers are in good shape, with minor scratches and chips in paint here and there. There remains some residual brake dust in the hard to reach areas.
  • The clear coated machined lips are in good shape but some residual stubborn brakedust spots remain. Additional cleaning efforts will be necessary to make them look better. There was some minor curb rash here and there that I blended away using a fine file. One lip has a couple deep indentations that could not be addressed without filling them with weld or plastic. See photo.
  • The hardware is in good shape but stained a bit with brake dust.
  • The back barrels are in good shape, with residual brake dust. No cracks or damages.
  • The center caps are complete and in good shape. There are some scratches and indentation marks as a result of past efforts to remove the caps without the correct wrench.
  • The seal round the perimeter of the barrels where the 3 pieces are attached looks to be in good shape but if using these wheels as is, I'd run a new round of silicone sealant just in case. All 4 wheels held air at the point I dismounted the tires.

The wheels were cleaned sothey areready for installation or cosmetic restoration. Includesall that you see in the photos.

These are very rare wheels and are period correct for early '90s Japanese models. Due to the size, strength, and moderately light weight, they may be a good drift wheel. Fitsall sorts of medium to high offset 5x114.3 cars from the 80s, and 90s, including the Nissan 300zx and 240sx models. Please do your research and buy these only if you are certain you can make them fit.

Packaging. I ship wheels in pairs so this set will go out in 2 boxes. Each pair is double-boxed, with rigid foam material between each box. This adds some cost, but my wheels never get damaged in transit.

Domestic Shipping:$150 in the lower 48 states by Fedex Ground.

International Shipping:Flat $475 to most European Countries, New Zealand, and Australia. Canada is $175. For other countries, figure on somewhere in the $300-600 range. Please inquire if you have interested (provide city and postal code).


Powered by SixBit's eCommerce Solution



Parts Search:


Follow