When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $167.85
Our molded solid brass, nickel plated, triple chrome plated, mirror polished Cloisonne emblems are superior over other inferior emblem offerings. They feature the highest quality 3M double-sided tape for secure attachment. The grille and trunk emblems are 3 3/8 inches in diameter and the steering wheel is 2 1/8 inches in diameter. Installation instructions are provided below to aid you in your application of our premium quality emblems to your Mercury Marauder clearcoat paint finish.
Remove any previously applied emblems using a hair dryer and fishing line/dental floss. Adhesive that remains on the paint may be removed with either 3M Brand Adhesive Remover or WD-40 and a soft cloth. Clean the surface with a few drops of grease-cutting liquid detergent in water (do not use a petroleum base cleaner). Rinse clean with fresh water then dry with a lint-free cloth. Wiping surface with denatured alcohol will also help remove any contamination and enhance the adhesion process. Place a protective padded towel or rubber mat under the location you plan to work so if you inadvertently drop the emblem, no damage will result. Once you have identified the exact location to apply your emblem, place the CAR Motorsports Custom Mercury Marauder emblem face down on a soft cloth and remove the adhesive protection paper. Carefully pick your emblem up by the edges and press the edges into place with constant even pressure. Finally press the entire emblem onto your body using direct even pressure. Maximum adhesion will occur within 48-72 hours. Enjoy your work and the new overall appearance this premium quality emblem provides.