Mass Air Flow Sensor MAF Fits for 1992-1996 Buick LeSabre Pontiac Bonneville New for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $28.27

  • PACKAGE:
  • 1xMass Air Flow Sensor/Meter
  • Compatible with the following vehicles:
  • 1994 Buick Century ( Sensor Only )
  • Specification:
  • *The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire.
  • *The PCM uses this signal primarily for fuel control.
  • *The Mass Air Flow sensor is located in the intake ducting after the air filter.
  • Mass Air Flow Sensor MAF Fits for 1992-1996 Buick LeSabre Pontiac Bonneville New

    PACKAGE:

    1xMass Air Flow Sensor/Meter

    Compatible with the following vehicles:

    1994 Buick Century ( Sensor Only )

    Specification:


    *The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire.

    *The PCM uses this signal primarily for fuel control.

    *The Mass Air Flow sensor is located in the intake ducting after the air filter.

    INSTALLING:the replacement MASS AIR FLOW SENSOR(MAF):
    *. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    *. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    *. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    *. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    *. CAREFULLY plug the harness connector lead into the MAF sensor.

    NOTE:

    • To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.

    Item SpecificsManufacturer Part Number L118148RTSBrand LiftsupportsManufacturer Warranty 10 YearsType Mass Airflow Sensor (MAF Mass Air Flow Sensor/Meter)Placement on Vehicle FrontColor BlackNumbers of Pin 3OE Spec or Performance/Custom OE Specw/ housing NOReplace Direct ReplacementPackage Quantity 1Packaging Type BOXMounting Type Bolt-OnPackaging Type BOXMounting Type Bolt-On
    Shipping

    WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.·Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.·All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.·Local pick up is not available.·Orders to the rest of world may be shipped out from our warehouse in HongKong.·International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    Payment

    ·PayPal preferred.You can open a Paypal account at www.paypal.com.

    Returns

    · We only warranty cost of parts. Any installation or other fees are non-refundable.

    · 20% restocking fee will be applied if returned item is not in brand new condition.

    · Buyer responsible to pay for shipping charges if

    ①no information what is wrong with item

    ② vehicle year/make/mode/trim is not in the compatible charts

    ③ wrong position/color choosen

    ④ no longer need

    ⑤ don't like

    ⑥ find better price

    · Items that have been installed or altered are non-returnable but it must be reported to us immediately.

    Contact Us

    · We will leave a feedback once we get your payment.

    · If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.

    · If you are satisfied with the product you received, wish you can leave us a feedback.

    Hot Item 2Pcs Hood Gas Spring Lift Support Shock Struts For 1999-2004 Jeep Grand Cherokee USD 11.99 2Pcs For 2005-2010 Jeep Grand Cherokee Rear Liftgate Lift Supports Shocks Struts USD 17.96 2 Tailgate + 2 Window Lift Support Struts For Chevrolet Suburban Tahoe GMC Yukon USD 29.46 2Pc Rear Hatch Liftgate Lift Support For 93-02 Chevrolet Camaro Pontiac Firebird USD 29.61 2 Hood+2 Hatch Tailgate Lift Supports Shocks Fits 1982-1992 Chevy Camaro Coupe USD 35.02 Best Seller

    Mass Air Flow Sensor MAF Fits for 1992-1996 Buick LeSabre Pontiac Bonneville New

    PACKAGE:

    1xMass Air Flow Sensor/Meter

    Compatible with the following vehicles:

    1994 Buick Century ( Sensor Only )

    Specification:


    *The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire.

    *The PCM uses this signal primarily for fuel control.

    *The Mass Air Flow sensor is located in the intake ducting after the air filter.

    INSTALLING:the replacement MASS AIR FLOW SENSOR(MAF):
    *. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    *. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    *. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    *. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    *. CAREFULLY plug the harness connector lead into the MAF sensor.

    NOTE:

    • To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.


    ShippingPaymentReturnsContact Us

    WARNING: Cancer and Reproductive Harm -www.P65Warnings.ca.gov.·Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.·All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-7 business days.·Local pick up is not available.·Orders to the rest of world may be shipped out from our warehouse in HongKong.·International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.

    ·PayPal preferred.You can open a Paypal account at www.paypal.com.

    · We only warranty cost of parts. Any installation or other fees are non-refundable.

    · 20% restocking fee will be applied if returned item is not in brand new condition.

    · Buyer responsible to pay for shipping charges if

    ①no information what is wrong with item

    ② vehicle year/make/mode/trim is not in the compatible charts

    ③ wrong position/color choosen

    ④ no longer need

    ⑤ don't like

    ⑥ find better price

    · Items that have been installed or altered are non-returnable but it must be reported to us immediately.

    · We will leave a feedback once we get your payment.

    · If you are dissatisfied for any reason, please do contact us a feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers.

    · If you are satisfied with the product you received, wish you can leave us a feedback.


    All rights reserved.




    Parts Search:


    Follow