When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $1.00
The G-1467 is LED Warning Lights packaged in durable aluminum base with removable lens, modular vibration-resistant power supply and LED lights.
This LED Waming Light is designed for 12 and 24 Volt Systems without modifications or adjustment. The size is 5.06* high with a base diameter of 6.4".
LED Beacon 3W x 8 LEDs 10V-30V aluminum base
Size: 16.3 am diameter base x 16.76 cm height
Lens size: 14 cm diameters 13.9 cm height
Flash Pattern: 15
LED color. White Lens color. White Gasket Soft Sponge EDPM
Packing: 1 pc into one plastic bag, then into one box
SAE Class 1 Approval & Amber ECE R65 Class 1 approvals
The G-1467 LED Warning Light is intended for commercial use and should be installed and maintained by qualified personnel. Position the unit to avold damage and protect as required. Ensure the location provides for function as intended and does not interfere with operator's safe operation of the vehicle.
1. Use the Base (Item 3) as a template to mark the mounting surface
2. Route 18 AWG wires, in a protected fashion, in accordance with the vehicle manufacturer's instructions, to the strobe mounting location.
3. Connect the LED Warning Light to the wire run using the Splice
Terminals (Item 4) provided. The red wire to positive and the black wire to negative. (Note: If this connection is reversed, the light will not operate. However, it will not cause damage to the warning light)
4. Test the LED Warning Light operation before proceeding.