INTAKE FOR BMW E90 - E93 / E60 / E61 / E82 / E88 ALL N52 ENGINES 325i 328i 330 for Sale

Price: $79.99

This is the easiest and cheapest mod you can do to your BMW with N52 engine.

It replaces the back part of the stock air box and it allows you to run a 3" inlet cone air filter (not included)

This mod gives you a better throttle response and a very desirable inline 6 intake noise.

The installation is very straight forward. Unplug the air flow sensor, remove the airbox by removing the two bolts on the right side and loosening the hose clamp, separate the two halves of the airbox, optionally you can reinstall the front half of the air box or run without it, remove the air flow sensor from the original air box and install it on the new intake with the two factory screws, install the cone filter on the new intake, install the intake on the factory intake pipe and tighten the hose clamp, plug back the air flow sensor and you are done.

We also include a plug (picture 8) if you decide to remove the factory resonator on the intake pipe. This requires modification of the intake pipe which is not reversible. You need to remove the intake pipe and cut the resonator (picture 9) grind the surface flat and just glue the plug to close the hole. This mod will further improve the throttle response and the intake noises.

160kW (215bhp) Applications:

  • 2006-2007E90/E92/E93325i, 325xi — U.S. and Canada only
  • 2006-2007E60/E61525i, 525xi — U.S. and Canada only
  • 2006-2008E85Z4 3.0i — U.S. and Canada only
  • 2008-2011E82/E88125i
  • 2008-2010E60/E61528i, 528xi — U.S. and Canada only
  • 2009-2010E84X1 xDrive25i

170kW (228bhp) Applications:

  • 2007-2013E90/E91/E92/E93328i, 328xi — U.S. and Canada only
  • 2008-2011E82/E88128i — U.S. and Canada only

180kW (241bhp) Applications:

  • 2010-2011F10528i

190kW (255bhp) Applications:

  • 2004-2007E63/E64630i
  • 2005-2007E90/E92/E93330i, 330xi
  • 2005-2008E65/E66730i
  • 2005-2009E60/E61530i, 530xi
  • 2009-2015F01730i
  • 2008-2011E89Z4 sDrive30i
  • 2009-2011E84X1 xDrive28i
  • 2009-2012E87130i
  • 2010-2011F25X3 28i

195kW (261bhp) Applications:

  • 2005-2008E85/E86Z4 3.0si
  • 2006-2009E87130i

200kW (268bhp) Applications:

  • 2006–2010E83X3 3.0si
  • 2006-2010E70X5 3.0si, xDrive30i
  • 2007-2010E63/E64630i
  • 2007-2013E90/E92/E93330i, 330xi

NOTE: 3d printing is not perfect so minor imperfections might be visible on the surface of the part, but we always make sure that the part meets the requirements.

NOTE2: The cone air filter is not included, you will have to buy one. For this application you will need a 3,5" inlet cone air filter.

Parts Search: