When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $50.34
Heater Blower Motor w/Fan Cage for Volvo 01-09 VHD VN 04 VNL 00-01 VNM 00-04 VT
Item Description
Package include:
1 x Blower motor
For the following years and models:
2001-2009 Volvo VHD
2004 Volvo VN
2000-2001 Volvo VNL
2000-2004 Volvo VNM
2006-2009 Volvo VNM
2006-2009 Volvo VT
How do you know if your blower motor needs to be replaced?
1.Weak Airflow from the Vents.
2.No Airflow at All.
3.Unusually High Energy Bills.
4.Strange Sounds.
5.Overheating.
6.Unusual Noises or Vibrations When Blower Is Turned On.
7.Smoke or smells.
Note
-Please make sure that this can be used on your vehicle before purchasing this product.
-If you need help with this, please write us an email, we will be happy to advise you.
How to install Blower motor?
Tools：
Socket wrenches
Screwdrivers
Hub puller
Smartphone
How to Install a Blower Motor
1.Shut off the electrical power supply to the blower motor.
2.Remove the panel covering the blower motor on your furnace.
3.Locate and remove the bolts or screws securing the motor housing to the frame.
4.Take pictures with your phone of the wires connecting the motor to the furnace. The pictures will guide you when you reconnect everything.
5.Disconnect motor wires from main unit.
6.Slide out motor housing.
7.Loosen the set screw next to the motor shaft.
8.On the back side of the motor, loosen screws and capacitor leads.
9.Unscrew hub puller until it can fit over the motor shaft.
10.Tighten bolts on sides of hub puller until it grips the shaft firmly.
11.Turn the hub puller clockwise until the motor comes loose. Support the motor while you do this.
12.Carefully move the motor out of the housing.
13.Undo screws on motor so that you can take off the belly band.
14.Position the new motor so that its rotation matches the direction that the fan moves the air.
15.Reattach motor belly band.
16.Center the motor within the fan wheel and connect bolts and capacitor leads on back.
17.On the other side, reconnect the motor set screw.
18.Slide motor and its housing back into furnace and secure in place with bolts.
19.Reconnect electrical wires.
20.Restore power to unit and test the new motor.
Item SpecificsBrand CPSCLUBManufacturer Part Number 9912294Placement on Vehicle FrontManufacturer Warranty 1 YearSurface Finish NEWOther Part Number 3946686Modified Item NoInterchange Part Number 351034171Shaft Type Double ShaftFitment Type Direct ReplacementSpeeds Double SpeedHousing Material PlasticProduct Name Heater A/C AC Blower Motor w/ Fan CageItem Weight 3.84 poundsTerminal Type 2 Lead Wires w/ ConnectorMaterial MetalColor White,BlackPacking include 1 x Blower motor fan w/ fan cage
Note:
Do check the compatible chart before placing order.
Payment:Paypal Only
Shipping:48-hour Handling time.
2-8 days delivery with fedEx, USPS, UPS.
Returns & Refunds:30-day Free Return.
Expect:
I Don't want it.
No Needed.
Ordered by mistake.
Contact Us:Any question or problem, do feel free to contact us.
Heater Blower Motor w/Fan Cage for Volvo 01-09 VHD VN 04 VNL 00-01 VNM 00-04 VT
Item Description
Package include:
1 x Blower motor
For the following years and models:
2001-2009 Volvo VHD
2004 Volvo VN
2000-2001 Volvo VNL
2000-2004 Volvo VNM
2006-2009 Volvo VNM
2006-2009 Volvo VT
How do you know if your blower motor needs to be replaced?
1.Weak Airflow from the Vents.
2.No Airflow at All.
3.Unusually High Energy Bills.
4.Strange Sounds.
5.Overheating.
6.Unusual Noises or Vibrations When Blower Is Turned On.
7.Smoke or smells.
Note
-Please make sure that this can be used on your vehicle before purchasing this product.
-If you need help with this, please write us an email, we will be happy to advise you.
How to install Blower motor?
Tools：
Socket wrenches
Screwdrivers
Hub puller
Smartphone
How to Install a Blower Motor
1.Shut off the electrical power supply to the blower motor.
2.Remove the panel covering the blower motor on your furnace.
3.Locate and remove the bolts or screws securing the motor housing to the frame.
4.Take pictures with your phone of the wires connecting the motor to the furnace. The pictures will guide you when you reconnect everything.
5.Disconnect motor wires from main unit.
6.Slide out motor housing.
7.Loosen the set screw next to the motor shaft.
8.On the back side of the motor, loosen screws and capacitor leads.
9.Unscrew hub puller until it can fit over the motor shaft.
10.Tighten bolts on sides of hub puller until it grips the shaft firmly.
11.Turn the hub puller clockwise until the motor comes loose. Support the motor while you do this.
12.Carefully move the motor out of the housing.
13.Undo screws on motor so that you can take off the belly band.
14.Position the new motor so that its rotation matches the direction that the fan moves the air.
15.Reattach motor belly band.
16.Center the motor within the fan wheel and connect bolts and capacitor leads on back.
17.On the other side, reconnect the motor set screw.
18.Slide motor and its housing back into furnace and secure in place with bolts.
19.Reconnect electrical wires.
20.Restore power to unit and test the new motor.
Item SpecificsBrand :CPSCLUBManufacturer Part Number :9912294Placement on Vehicle :FrontManufacturer Warranty :1 YearSurface Finish :NEWOther Part Number :3946686Modified Item :NoInterchange Part Number :351034171Shaft Type :Double ShaftFitment Type :Direct ReplacementSpeeds :Double SpeedHousing Material :PlasticProduct Name :Heater A/C AC Blower Motor w/ Fan CageItem Weight :3.84 poundsTerminal Type :2 Lead Wires w/ ConnectorMaterial :MetalColor :White,BlackPacking include :1 x Blower motor fan w/ fan cageNote:
Do check the compatible chart before placing order.
Payment:Paypal Only
Shipping:48-hour Handling time.
2-8 days delivery with fedEx, USPS, UPS.
Returns & Refunds:30-day Free Return.
Expect:
I Don't want it.
No Needed.
Ordered by mistake.
Contact Us:Any question or problem, do feel free to contact us.
All rights reserved.