BLACK AMBER HEADLIGHTS ASSEMBLY FIT FOR 05-11 TOYOTA TACOMA HEADLAMPS LEFT+RIGHT for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $70.90

DocumentYou May Also Like

Headlight Assembly

Headlight Assembly

Headlight Assembly

Headlight Assembly

Compatible Models

Toyota Tacoma

Toyota Tacoma

Toyota Tacoma

Toyota Tacoma

Fits Year

2005-2011

2005-2011

2005-2011

2005-2011

Features:Gives you and your family safer nighttime driving and see road markings and traffic signs better.Driving at night can be a scary proposition - and it's even scarier if you can't see the road well.A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous, not onlyis your own safety at risk, but the safety of others is as well.

High Sealing: Good enough to avoid any water issue.

Exactly Right Position: All the new assemblies popped right into place and lined up with the mounting bolts exactly rightGood Fitment: Perfectly fit 2009-2018 Dodge Ram 1500/2500/3500 Black QuadExcellent Packing: Each assembly was sealed in its own fitted box, with a cellophane protectant on the outer plastic and paper seals covering the access ports for the bulbs


Fitment:

For 2005 2006 2007 2008 2009 2010 2011 Toyota Tacoma

OEM PART NUMBER: TO2502157, TO2503157, TO2503181, TO2503181

Interchange Part Number: 8115004163, 8111004163, 8115004173, 8111004173

Description:

High Beam Bulb Type:H4 (bulb not included)

Low Beam Bulb Type:H4 (bulb not included)

Turn Signal Bulb Type:4157A (bulb not included)

Position Light Bulb Type:W5W (bulb not included)



Package Includes:

Pair LH(Left Hand)&RH(Right Hand) Headlight Assembly

Installation:


1). How to install:

1. Undo the screws, clips, or retainer springs that hold the headlight in place.

2. Disconnect the wiring from the assembly.

3. Detach the headlight from the vehicle to replace it with a new one.

4. Fit in the new headlight assembly.

5. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.

6. Reconnect the wiring that was unplugged from the assembly.

7. Put back the grille and other components that you removed. Seal them back into place.

8. Test the new assembly.


2). How to adjust:

Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.


1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.

2.Adjust the headlights individually.The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3.Adjust the vertical field.The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4.Test your results.

WE ACCEPT THESE PAYMENT METHODS

( 10% sales tax will be applied for orders shipped to Washington state by state law )

  • 30 Days easy returns satisfaction guarantee.
  • Items to be returned must be in original factory condition.
  • Please enclose a note about item number and order id, your eBay ID and the reason of return.


Parts Search:


Follow