When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $189.99
Sport-Motor
Product Description:
2pcs, LH (Driver Side) & RH (Passenger Side)
Features:
Tested In Simulated Rain/Humidity/Shock
High quality aftermarket replacement headlights
Do not come with installation instructions
Professional installation is highly recommended
All Lamps come without bulbs, Should be re-use original factory bulbs
The rated power for bulbs is 70W. Users will not be suggested to use bulbs whose power is above 70W.
Compatible Models:
2006-2010 Explorer
2007-2010 Explorer Sport Trac
Installation recommendations:
Step 1: Consult a vehicle manual to find out which component needs to be removed to get access to the headlight assembly. Depending on the year, make, and model of the vehicle, the front grill may need to be removed. To remove the grille, you have to undo the screws or any fastener used to secure it.
Step 2: Undo the screws, clips, or retainer springs that hold the headlight in place. You may have to use a flat-blade or Phillips screwdriver to remove any of these fasteners that are typically located at the top and bottom of the headlight.
Step 3: Disconnect the wiring from the assembly. After the wiring is removed, you can now detach the headlight from the vehicle to replace it with a new one.
Step 4: Fit in the new headlight assembly. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
Step 5: Reconnect the wiring that was unplugged from the assembly.
Step 6: Put back the grille and other components that you removed. Seal them back into place.
Step 7: Test the new assembly. Switch on the headlights to see if they’re working. If not, then make some adjustments and check the manual.