For Honda Civic CRX 88-91 EF Front Traction Control Arm Lower Tie Bar Brace Kit for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $72.25

  • Description
    • 100% Brand New
    • Material:Aluminum ,T-304 light weight stainless steel.
    • The diameter of this bar is approx. 38mm, it's STRONG, and was a breeze to install.
    • Unlike the old design and most other traction bars on the market, it comes with its own 1 piece Radius rods and 1 adjustable heims, and able to adjust caster where it bolts up to the lca.
    • Increase traction to ground.
    • Prevent spring windup during breaking.
    • Easy to fit, direct bolt on.
    • Professional Installation is Highly Recommended
    • Installation Instruction is not Included.
  • Installation steps:
  • For Honda Civic CRX 88-91 EF Front Traction Control Arm Lower Tie Bar Brace Kit

    Description

    • 100% Brand New
    • Material:Aluminum ,T-304 light weight stainless steel.
    • The diameter of this bar is approx. 38mm, it's STRONG, and was a breeze to install.
    • Unlike the old design and most other traction bars on the market, it comes with its own 1 piece Radius rods and 1 adjustable heims, and able to adjust caster where it bolts up to the lca.
    • Increase traction to ground.
    • Prevent spring windup during breaking.
    • Easy to fit, direct bolt on.
    • Professional Installation is Highly Recommended
    • Installation Instruction is not Included.

    Installation steps:

    1. Remove the old crossmember
    2. Remove both front tow hooks.
    3. Mount the Traction bar without the radius arms.
    4. Install radius arms. Bolt the front first where it goes on the bar
    5. loosen up the nut on the heims and adjust length until the holes line up to the top of the front lower control arm(be sure to count the threads on the heims to make sure both side is equal length)
    6. Tighten up all bolts and make sure to not forget the nut on the heims.

    Package Include

    • 1 x Traction Control Tie Bar Kit
    • Just as shown in picture

    Fitment:

    • 1988-1991 Honda Civic models only
    • 1988-1991 Honda CRX models only
    • For Year and Model, Please Check Compatibilit

    Payment
    • We accept eBay payment and other payments through eBay payment

    Shipping

    • Items will be shipped within 1 business days after your payment is cleared.
    • All Customer's items will be shipped from our CA or NJ warehourse
    • Import duties, taxes and charges are not included in the item price or shipping charges
    • International orders may take 1~3 weeks to arrive

    Returns

    • You can return yourunused items back for exchange or refund within 60 days.
    • Please contact us for return process before you return the item.

    Customer service

    • Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.

    Our StoreMain ProductsPromotion Items Shop CategoryStore Home Exhaust Systems◈Exhaust Manifolds & Headers◈Exhaust Pipes & Tips◈Exhaust Tips◈Mufflers◈V Clamps◈Turbo Chargers & Parts◈Exhaust Wraps◈Exhaust cutout Intake Systems◈EGR Valves & Parts◈Air Intake Systems◈Cylinder Heads & Parts Timing Components◈Timing Chain Kit◈Timing Belt Water Pump Kit◈Control Solenoid Valve Suspension & Steering◈Shocks & Struts◈Coil Springs◈Lift Kits & Parts Chassis Parts◈Control Arms & Parts◈Control Arms & Parts-OEM◈Control Arms◈Sway Bars◈Caster/Camber Kits Engines & Components◈Motor Mounts Cooling Systems◈Fans & Kits◈Radiators & Parts◈Intercooler Piping Kit Exterior◈Grilles◈Hoods Brakes & Brake Parts◈Air Dryers Interior◈Locks & Hardware Automotive Repair Kits◈Other Automotive Tools & Suppl◈Diagnostic Service Tools Other Parts◈Go Kart Parts◈Connectors & Terminals Lighting & Lamps◈Xenon Lights Gaskets◈Cyl. Head & Valve Cover Gasket Hangers, Clamps & Flanges◈T Clamps◈Narrow Clamps◈Step Clamps Transmission & Drivetrain◈Universal Joints & Driveshafts Air Intake & Fuel Delivery◈Fuel Inject. Controls & Parts Turbos, Nitrous, Superchargers◈Turbo Chargers & Parts◈Turbo Chargers Rebuild Kit Fuel oil line & fitting◈Fuel oil line◈Fuel oil fitting OtherHot Item 2\" Front Leveling lift kit Fit Chevy Silverado GMC Sierra GM 1500 LM 07-17 Black USD 16.66 Universal 3\" Inch Stainless Steel V-Band Turbo Downpipe Exhaust Clamp Vband 76mm USD 18.46 2 X Universal 3\" Inch Stainless Steel V-Band Turbo Downpipe Exhaust Clamp Vband USD 32.29 2.5\'\' Inch Stainless Steel V-Band Flange & Clamp Kit for Turbo Exhaust Downpipes USD 14.29 Forged/Front 1-3\" Leveling Kit W/ Shock Extender Fits GMC Chevy 2500 3500 99-13 USD 29.99 Picture

    New List Item Dual Plane Satin Aluminum Intake Manifold For SBC Chevy Vortec 350 Heads USD 142.09 12V ADJUSTABLE AUTOMOTIVE RADIATOR FAN THERMOSTAT SWITCH CAR TEMPERATURE CONTROL USD 12.35 Water Pump Assembly For A4 A3 TT VW Tiguan Jetta Golf GTI Eos Beetle CC 2.0T TSI USD 53.66 For 2003-2006 Ford Expedition Driver Bottom Side Leather Seat Cover Tan & Beige USD 57.99 For 2007-2008 Dodge Ram 1500 Gray Front Driver Bottom Side Seat Cover Soft Cloth USD 54.99 For Honda Civic CRX 88-91 EF Front Traction Control Arm Lower Tie Bar Brace Kit

    Description

    • 100% Brand New
    • Material:Aluminum ,T-304 light weight stainless steel.
    • The diameter of this bar is approx. 38mm, it's STRONG, and was a breeze to install.
    • Unlike the old design and most other traction bars on the market, it comes with its own 1 piece Radius rods and 1 adjustable heims, and able to adjust caster where it bolts up to the lca.
    • Increase traction to ground.
    • Prevent spring windup during breaking.
    • Easy to fit, direct bolt on.
    • Professional Installation is Highly Recommended
    • Installation Instruction is not Included.

    Installation steps:

    1. Remove the old crossmember
    2. Remove both front tow hooks.
    3. Mount the Traction bar without the radius arms.
    4. Install radius arms. Bolt the front first where it goes on the bar
    5. loosen up the nut on the heims and adjust length until the holes line up to the top of the front lower control arm(be sure to count the threads on the heims to make sure both side is equal length)
    6. Tighten up all bolts and make sure to not forget the nut on the heims.

    Package Include

    • 1 x Traction Control Tie Bar Kit
    • Just as shown in picture

    Fitment:

    • 1988-1991 Honda Civic models only
    • 1988-1991 Honda CRX models only
    • For Year and Model, Please Check Compatibilit

    Payment
    • We accept eBay payment and other payments through eBay payment

    Shipping

    • Items will be shipped within 1 business days after your payment is cleared.
    • All Customer's items will be shipped from our CA or NJ warehourse
    • Import duties, taxes and charges are not included in the item price or shipping charges
    • International orders may take 1~3 weeks to arrive

    Returns

    • You can return yourunused items back for exchange or refund within 60 days.
    • Please contact us for return process before you return the item.

    Customer service

    • Please feel free to contact us by ebay message if you have any questions, our customer service will reply within one business day.



    Parts Search:


    Follow