When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $80.90
Document
To fit for models:
For 2005 Ford Excursion US models only
For2005-2007 Ford F-250 Super Duty
For2005-2007Ford F-350 Super Duty
For2005-2007Ford F-450 Super Duty
For2005-2007Ford F-550 Super Duty
Not fit with Sealed Beam Headlight model
2005 Ford Excursion US models only
PART NUMBER: 3221-0045L, 3221-0045R
HOLLANDER: 114-00902AL, 114-00901AR
OEM: 6C3Z 13008 DB, 6C3Z 13008 CBPARTSLINK: FO2502224, FO2503224
Description:
A new pair of headlights from ours allows you to see the road in front of you clearly during the night and in any bad weather that may arise.
Gives you and your family safer nighttime driving.
Makes your car looks newer.
See road markings and traffic signs better.
Driving at night can be a scary proposition - and it\'s even scarier if you can\'t see the road well.
A dim, cloudy, yellowed, or otherwise damaged or non-functioning headlight makes driving dangerous, not only is your own safety at risk, but the safety of others is as well.
Specifications：
High Beam Bulb Type: H13 (bulb not included)
Low Beam Bulb Type: H13 (bulb not included)
Turn Signal: 3157 (bulb not included)
Black Housing Clear Lens With Amber Reflector
Features:
Black Housing Clear Lens
Great Replacement or upgrade for factory headlightsAdjustment screws for high/low beam
Package included:
1 pair set of Left Driver Side + Right Passenger Side Headlights Headlamps
Note:
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The center lines of the headlights should not be any higher than 3.5 feet above the ground.
1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.
2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.
3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5. Test your results.
Condensation DOES NOT Indicate Crack
It\'s normal when there is condensation accumulated inside headlights. Condensation occurs because a lot of reasons, such as temperature differences, low-pressure areas drawing moisture in winter, etc. It won\'t affect the optical functions of headlights
How to Drive Away Temporary Condensation1. Check that vents aren\'t blocked and switch on the low beams for about 20 mins2. Take the headlight bulb out and clear moisture3. Put a silica gel packet in the housing to soak up the moisture
WE ACCEPT THESE PAYMENT METHODS
( 10% sales tax will be applied for orders shipped to Washington state by state law )
- 30 Days easy returns satisfaction guarantee.
- Items to be returned must be in original factory condition.
- Please enclose a note about item number and order id, your eBay ID and the reason of return.